Fibaro FGS 224 - Not in OpenZwave

svenker · Post by **svenker** » Sunday 12 July 2020 23:26

Hello everyone,

Just bought two new Fibaro Smart Relay FGS 224 and they are not recognized in Domoticz (Hardware then OpenZWave).

The FGS 224 is the first double relay working in 24v on top of 110-230v which is practical in some cases.

Can I just copy the FGS 223 files in the manufacturer folder of Domoticz into 224 ?
The unknow code is : Unknown: id=010f Unknown: type=0204, id=1000

Or is the Beta version working well ?
I usually avoid Beta as last time I got a big crash with it...

Thanks in advance for your support.
Sam

svenker · Post by **svenker** » Wednesday 15 July 2020 11:36

Hello !
Any support on this please ? So annoying not to be able to install these new Fibaro Relays...

Snowtiger · Post by **Snowtiger** » Friday 17 July 2020 22:43

svenker wrote:Hello !
Any support on this please ? So annoying not to be able to install these new Fibaro Relays...

You could always try the Beta version - make a Backup of the complete Domoticz folder, install Beta and test it - if it still does not work, you could always return to the Backup version.

But, I checked the Zwave Config in Domoticz and the 224 is not present yet. Also in the Open Zwave code, used in Domoticz, the 224 is not present yet.

So, in some way of another you have to make the correct files, integrate it into Domoticz and use the FGS224 this way, or wait until it is available.

bill · Post by **bill** » Saturday 08 August 2020 11:31

Hi Svenker,

Any solutions from your last post ?
I'm in same case

thanks for your reply

svenker · Post by **svenker** » Monday 24 August 2020 16:13

Hello Bill,

No

I did received today two FGS-223 until someone add the configuration file in OpenZwave.

If someone could kindly create the config files it would help

Thanks in advance !
Sam

svenker · Post by **svenker** » Tuesday 01 September 2020 22:26

Hello
Any help on these FGS 224 ?
Rgds
Sam

bayensf · Post by **bayensf** » Saturday 31 October 2020 12:06

Hi same for me. I have the FGS-224 and the node is added, but the configuration file is not showing up.

bayensf · Post by **bayensf** » Thursday 12 November 2020 16:03

Snowtiger wrote: ↑Friday 17 July 2020 22:43
svenker wrote:Hello !
Any support on this please ? So annoying not to be able to install these new Fibaro Relays...
You could always try the Beta version - make a Backup of the complete Domoticz folder, install Beta and test it - if it still does not work, you could always return to the Backup version.

But, I checked the Zwave Config in Domoticz and the 224 is not present yet. Also in the Open Zwave code, used in Domoticz, the 224 is not present yet.

So, in some way of another you have to make the correct files, integrate it into Domoticz and use the FGS224 this way, or wait until it is available.

So, in some way of another you have to make the correct files, integrate it into Domoticz and use the FGS224 this way, or wait until it is available.

Can I find a procedure how to do this?

meal · Post by **meal** » Thursday 12 November 2020 23:19

I got the following file downloaded by openzwave automatically.
Maybe it might help.
BR

fgs224.xml: (11.39 KiB) Downloaded 112 times

harrykausl · Post by **harrykausl** » Thursday 26 November 2020 15:28

Dos it work with this xml-file?

meal · Post by **meal** » Thursday 26 November 2020 18:56

Hello
Unfortunately I cannot tell if it works properly because I do not have a FGS224 in my configuration.
I just got that file downloaded when restarting domoticz.
BR

bayensf · Post by **bayensf** » Tuesday 01 December 2020 22:14

THANKS

To whom did it, it's added in the latest version.

Mikelise05 · Post by **Mikelise05** » Friday 04 December 2020 8:03

Hello,
I just included a fgs 224 module in domoticz.
In order for it to be recognized, I integrated the last config file from the openzwave github (https://github.com/OpenZWave/open-zwave) to home \ pi \ domoticz replacing the old config file then made a domoticz restart.
I also modified the fgs224.xml file from config \ fibaro in order to add the missing parameter 151 (???) to it (by copying the 150 and changing the index to 151)
Now the fgs 224 is well recognized (all the parameters are accessible and modifiable)
But the fgs 224 only seems to work on an impulse, anyone have an idea to switch the operation to bistable switch ?

harrykausl · Post by **harrykausl** » Saturday 05 December 2020 14:52

Has anyone the 214 single switch working. I don't find it in open z-wave conifg.