I have adjusted the script to work with the new API and i would like to add it to the wiki, but I saw that the permissions have changed and I am no longer able to change anything. I saw I needed to PM a moderator to gain access, but I cannot PM anyone as I havnt posted enough, so i thought i would kill 2 birds with 1 stone, post more and share my script.
I have let jamesremuscat on github do all the hard work, he created pyze, then just use that to send the information to domoticz.
To install pyze I used the commands
Code: Select all
git clone https://github.com/jamesremuscat/pyze
cd pyze/
sudo python3 setup.py installThen login to pyze
Code: Select all
pyze loginCode: Select all
pyze statusOnce setup you can fill out the domoticz info at the top of the script and run it
Code: Select all
#!/bin/bash
while true
do
#Domoticz Variables
username="Domoticz username"
password="Domoticz password"
domoticzIP="Domoticz IP address"
peridx="Percent IDX"
textidx="Text sensor IDX"
milesidx="Miles IDX"
battempidx="Battery temperature IDX"
updatetime="60" #not sure of the update frequency on the new api
#Variables
pyze status > ./zoeinfo.txt
info=`cat ./zoeinfo.txt`
battemp=`cat ./zoeinfo.txt | grep "Battery temp" | sed 's/Battery temperature //; s/.C//'`
batpercent=`cat ./zoeinfo.txt | grep "Battery level" | sed 's/Battery level //; s/ //; s/\%//'`
charging=`cat ./zoeinfo.txt | grep "Charging state" | sed 's/Charging state //; s/Not charging or plugged in/NotCharging/'`
plugged=`cat ./zoeinfo.txt | grep "Plug state" | sed 's/Plug state //; s/ //'`
range=`cat ./zoeinfo.txt | grep "Range es" | sed 's/Range estimate //; s/\..*//'`
chargecurrent=`cat ./zoeinfo.txt | grep "Charge rate" | sed 's/Charge rate //'`
remaining=`cat ./zoeinfo.txt | grep "Time rem" | grep -o ".:.." | sed 's/:/%20hours%20/'`
#Script
if [ $plugged = "Unplugged" ]
then
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$textidx&nvalue=0&svalue=Not%20Plugged%20In"
elif [ $plugged = "Pluggedin" ]
then
if [ $charging = "Charging" ]
then
if [ -z "$remaining" ]
then
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$textidx&nvalue=0&svalue=Charging%20at%20$chargecurrent"
else
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$textidx&nvalue=0&svalue=Charging%20at%20$chargecurrent%0A$remaining%20remaining"
fi
elif [ $charging = "NotCharging" ] && [ $plugged = "Pluggedin" ]
then
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$textidx&nvalue=0&svalue=Finished%20Charging"
fi
fi
if [ $range -gt 1 ]
then
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$milesidx&nvalue=0&svalue=$range"
fi
if [ $batpercent -gt 1 ]
then
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$peridx&nvalue=0&svalue=$batpercent"
fi
curl -i -H "Content-Type: application/json" "http://$username:$password@$domoticzIP:8080/json.htm?type=command¶m=udevice&idx=$battempidx&nvalue=0&svalue=$battemp"
#Time between updates
sleep $updatetime
done &
