Zigate settings

[tjabas]

Hi!

i have been adding alot of zigbee devices to my zigate on my rpi3, i have about 30 devices, mostly Aqara sensors and some Ikea trådfri switches and repeaters, but now i am getting some problems, some of the paired devices suddenly disapears after i make a reboot of the rpi, its both the Aqara and Trådfri that disapears, it seems like its the once the are further away from the Zigate, i have to include them again after a reboot.
any suggestion of why it behaves like that?

im using channel 15 on the zigate, should i acitvate polling?
and should i activate OTA in Zigate plugin? does the latest firmware always get installed without any problems?

thanks in advance

[pipiche]

Please check the wiki , you should find info there.

https://github.com/pipiche38/Domoticz-Z ... nf.json.md

As regards to your channel for zigbee you need to see what is WiFi 2.4 channel to avoid overlap


https://github.com/pipiche38/Domoticz-Z ... -Zigbee.md




Envoyé de mon iPhone en utilisant Tapatalk

[tjabas]

Please check the wiki , you should find info there.

https://github.com/pipiche38/Domoticz-Z ... nf.json.md

As regards to your channel for zigbee you need to see what is WiFi 2.4 channel to avoid overlap


https://github.com/pipiche38/Domoticz-Z ... -Zigbee.md




Envoyé de mon iPhone en utilisant Tapatalk

thanks for your answer.

i have looked at the github link and there are alot of parameters that i cant find in the webpage for the Zigate, theres ony a few of the settings avalible and i have activated advanced settings.

[Damsee]

Hi,

Since you're using Zigate on channel 15, it should be better to set your Wifi 2.4Ghz on channel 11 to avoid signal interferences.
You can check the signal overlapping here : https://github.com/pipiche38/Domoticz-Z ... -Zigbee.md

Regarding the Zigate plugin settings, there are :
- Settings available through Domoticz under Settings > Hardware > Your Zigate ID with few parameters but available whatever your version of DZ/Plugin,
- Many more settings available through the Plugin Web Admin Interface as described here : https://github.com/pipiche38/Domoticz-Z ... -Zigbee.md

Regarding that last option (Web Admin Interface), you can have more info here : https://github.com/pipiche38/Domoticz-Z ... terface.md
=> Domoticz mini 4.10900
=> Zigate Plugin mini 4.4

Hope that helps

[tjabas]

thank you very much