Novy 6810 Cooker Hood with....,433.x Mhz control!

Moderator: leecollings

Post Reply
jadijkstra2000
Posts: 58
Joined: Monday 26 May 2014 10:18
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Novy 6810 Cooker Hood with....,433.x Mhz control!

Post by jadijkstra2000 »

Hi all,

As of today we have a new kitchen with a Novy 6810 cooker hood.
Very nice thing with LED lights build in. Control can be learned for an induction plate and also additional Remote Control.
As it is 433 Mhz I like to add it to Domoticz, but cannot find anything about it...

Anyone any idea? :)
martijnm
Posts: 26
Joined: Thursday 04 February 2016 13:06
Target OS: Raspberry Pi / ODroid
Domoticz version: 3.530
Location: Emmen, Drenthe
Contact:

Re: Novy 6810 Cooker Hood with....,433.x Mhz control!

Post by martijnm »

gjwater
Posts: 5
Joined: Sunday 26 January 2020 13:03
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Novy 6810 Cooker Hood with....,433.x Mhz control!

Post by gjwater »

Today I found out as well that Domoticz does not support the Novy hood in the RFXcom. That was a bit disappointing, because I bought the device specially for control of my Novy hood. With HomeSeer trial version ( 1 month valid) it is possible. My aim is to get a good voice control over the hood via Google home while cooking, preferably in Dutch. Sofar that works a bit clumsy. "Light on" switches the light on, but "Light off" does nothing. The Novy button is a toggle switch. So you have to say again "Light on" to turn the light off. I will test the setup for a month, but probably I am not going to purchase the rather expensive HomeSeer, where the RFXcom plugin cost another 40$. I hope the Domoticz team will integrate the Novy hood soon in their RFXcom support.
gjwater
Posts: 5
Joined: Sunday 26 January 2020 13:03
Target OS: NAS (Synology & others)
Domoticz version:
Contact:

Re: Novy 6810 Cooker Hood with....,433.x Mhz control!

Post by gjwater »

I found some time to spend on the Novy hood to control by voice (via Google and Controlicz). Finally I succeeded by creating dummy switches that call JSON commands:

First find the RFXcom idx of your remote. In my case 933. Then I use these json commands that have the same functions as the remote buttons.

http://192.168.2.14:8080/json.htm?type=command&param=switchlight&idx=933&switchcmd=light
http://192.168.2.14:8080/json.htm?type=command&param=switchlight&idx=933&switchcmd=power
http://192.168.2.14:8080/json.htm?type=command&param=switchlight&idx=933&switchcmd=plus
http://192.168.2.14:8080/json.htm?type=command&param=switchlight&idx=933&switchcmd=min
OddNightingale
Posts: 1
Joined: Friday 03 December 2021 9:41
Target OS: Windows
Domoticz version:
Contact:

Re: Novy 6810 Cooker Hood with....,433.x Mhz control!

Post by OddNightingale »

gjwater wrote: Sunday 26 January 2020 21:22 Today I found out as well that Domoticz does not support the Novy hood in the RFXcom. That was a bit disappointing, because I bought the device specially for control of my Novy hood. With HomeSeer trial version ( 1 month valid) it is possible. My aim is to get a good voice control over the hood via Google home while cooking, preferably in Dutch. Sofar that works a bit clumsy. Tellpizzahut "Light on" switches the light on, but "Light off" does nothing. The Novy button is a toggle switch. So you have to say again "Light on" to turn the light off. I will test the setup for a month, but probably I am not going to purchase the rather expensive HomeSeer, where the RFXcom plugin cost another 40$. I hope the Domoticz team will integrate the Novy hood soon in their RFXcom support.
Thank you for sharing article and information. this is very helpful for beginner.
Art1971
Posts: 2
Joined: Tuesday 18 December 2018 19:29
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Novy 6810 Cooker Hood with....,433.x Mhz control!

Post by Art1971 »

My Novy Cloud Hood supports an extra function: "mood mode". With the button called "NOVY" the led lights can be switched to a dimmed preprogrammed light level. With help from the costumer support from RfxComm, I received a beta version for the RfxCom XL transceiver which now supports this button!
The remaining question is how to get the new button/function supported in Domoticz!

Does anybody know how?
Post Reply

Who is online

Users browsing this forum: Google Adsense [Bot] and 1 guest