RFY (somfy) relay device -> on/off inverted

[pire76]

Hello,

I use domoticz with a Raspberry pi + RFXCom E version.

When using this kind of device :

http://www.alloalarme.fr/alarme-somfy/3 ... oCsVnw_wcB

A somfy rts (RFY protocol). On status is "off" and off status is "on".

How can I solve this issue ?

Thanks.

Somfy rts relay

téléchargement.jpg (3.23 KiB) Viewed 3865 times

[gizmocuz]

Also with the rfxmngr application?

[JLO1969]

Hello,

I do confirm. Somfy power switches are correctly managed with rfxmngr application ( UP cmd = Switch Power ON & DOWN cmd = Switch Power OFF) but with domoticz on Raspberry pi + RFXCom E version commands are inverted
How can this be fixed?

[kroonsteen]

Same here, testing the RFXcom in combination with the Somfy Powerplug (e200 RTS). Everything works correctly with the rfxmngr application, in Domoticz it's inverted, when i turn it off in the aplication, it goes on and vice versa. Hoping for a solution.... Testing now on Windows 7, i want to finally install it on a synology NAS.

[kroonsteen]

Same problem with the Somfy Lighting Modulis RTS Receiver Dimmer (pn: 9014281), also inverted, so can't dim in Domoticz. I can only turn it off (=on) and on (=off).

[kroonsteen]

i've made the next workaround to make the powerplugs work for me:

-created a dummy switch ("Tuin Waterval").
-created a real switch ("Somfy2"), the actual powerplug.
-created the next blocky:

blocky

somfy.JPG (25.07 KiB) Viewed 3400 times

When I turn the dummy switch "on" then "Tuin Waterval" is "on" (but the real powerplug is in domoticz "off").

[xhark]

solved in 3724 version : viewtopic.php?f=6&t=9174&p=63574

[kroonsteen]

solved in 3724 version : viewtopic.php?f=6&t=9174&p=63574

today my somfy devices didn't turn on, after i had updated domiticz. Thx to above post i understand why. So, i've removed my virtual switches for the inverted somfys