Controlicz - Domoticz to Google Home/Assistant integration Topic is solved

[Madgeni]

I believe the default ssl port for synology is 8443, not 443?

[Madgeni]

Hi all, Controlicz is undergoing maintenance - apologies for the outage, should be back in an hour

*Edit* - maintenance complete

[DomoPal]

Hi all, Controlicz is undergoing maintenance - apologies for the outage, should be back in an hour

*Edit* - maintenance complete

When I try to create an account it fails and there's an error: "Recaptcha 2 module not found"

[Madgeni]

Hi all, Controlicz is undergoing maintenance - apologies for the outage, should be back in an hour

*Edit* - maintenance complete

When I try to create an account it fails and there's an error: "Recaptcha 2 module not found"

Apologies - this is now fixed.

[WarLion]

its controlicz working?

on google assistance replyt with the device controlicz is not avalible in this moment (mexico)

i been trying to test connection on the profile page and dont show anything , also try to delete the account ask for confirmation but dont delete profile ,

[Madgeni]

its controlicz working?

on google assistance replyt with the device controlicz is not avalible in this moment (mexico)

i been trying to test connection on the profile page and dont show anything , also try to delete the account ask for confirmation but dont delete profile ,

Hi -
Controlicz is fine. If you'd like to re-register, and mail me from your controlicz profile, i'll work out why your connection failed.
The test works fine, but is browser dependent, and requires pop-ups.

[Madgeni]

Quick update from Google:
Native blind controls (so recognised as blinds) is being soft-launched - finally. This will, inevitably, take time to be rolled out across regions, so won't be implementing it yet. It works in English, but not in Dutch. This will make Open/Close, as well as more natural percentage behaviour available - "Hey Google, open the kitchen blinds to 50%" etc.

[EddyG]

Nice. Can't wait until it is rolled out in NL.
It currently sounds a bit stupid to say "Aan" and "Uit" in NL.
Is there any roll-out schema from Google for other missing functionalities?

[Madgeni]

am on the Early Access Programme, and i can say it's very slow. Really want Sensors asap, and am pressing them for timescales, but you can appreciate they dont tend to share that stuff (certainly not with me!)

[dagasoft]

Quick update from Google:
Native blind controls (so recognised as blinds) is being soft-launched - finally. This will, inevitably, take time to be rolled out across regions, so won't be implementing it yet. It works in English, but not in Dutch. This will make Open/Close, as well as more natural percentage behaviour available - "Hey Google, open the kitchen blinds to 50%" etc.

Hi!
I see that blinds now appear as blinds in my Google home app. I can open close with natural command (open blind instead of power on/off) but I see that in Google home app they appear with a gear as if they weren't set up. Do you know if I have to do something?

[Madgeni]

Hi there -
this is normal. They will be including in-app controls for the blinds soon - including a slider for percentage open. Percentage open should also be working with voice now.

[Varazir]

Wee my blinder shows up as a blinder in GH. But I can't get the % to work. Open and close works fine

I see this in the log when I say: lower blinder 50%

2019-03-16 08:48:25.817 Status: User: controlicz initiated a switch command (50/Bedroom Blinder/Set Level)

But nothing happens to the blinder.



Skickat från min Nokia 7 plus via Tapatalk

[Madgeni]

Hi -
can you control your blinds by percentages? Can you try again and i'll see what it's doing, that log entry looks right to me

[Varazir]

Hi -
can you control your blinds by percentages? Can you try again and i'll see what it's doing, that log entry looks right to me

Okay checked a bit more now

When I use the slider on the webgui

Code: Select all

2019-03-17 17:49:40.286 Python: Changed: ID: 50 Name: Bedroom Blinder, Type: 244, subType: 73, switchType: 16, s_value: 100, n_value: 1, n_value_string: Open, last_update_string: 2019-03-17 17:49:39

When I use voice: lower 10%

Code: Select all

2019-03-17 17:50:47.199 Python: Changed: ID: 50 Name: Bedroom Blinder, Type: 244, subType: 73, switchType: 16, s_value: 50, n_value: 2, n_value_string: Set Level: 50 %, last_update_string: 2019-03-17 17:50:46

The blind get closed


When I use voice: raise 50%

Code: Select all

2019-03-17 17:51:59.576 Python: Changed: ID: 51 Name: Bedroom_Blinder_Current_Consumption, Type: 248, subType: 1, switchType: 0, s_value: 0.0, n_value: 0, n_value_string: 0.0, last_update_string: 2019-03-17 17:51:58

GH responds with correct info but nothing happens

[Madgeni]

Thanks - can you try again? Turned on some logging

[Varazir]

Thanks - can you try again? Turned on some logging

Tested it again, still nothing and the second time it just said it couldn't connect to the website

2019-03-17 21:23:05.043 Python: Changed: ID: 50 Name: Bedroom Blinder, Type: 244, subType: 73, switchType: 16, s_value: 0, n_value: 0, n_value_string: Closed, last_update_string: 2019-03-17 21:23:03

[Madgeni]

Tested it again, still nothing and the second time it just said it couldn't connect to the website

2019-03-17 21:23:05.043 Python: Changed: ID: 50 Name: Bedroom Blinder, Type: 244, subType: 73, switchType: 16, s_value: 0, n_value: 0, n_value_string: Closed, last_update_string: 2019-03-17 21:23:03

Can you 'sync my devices' and try again please? Thanks

[salvacalatayud]

I've tested the same, GH tells me that this function is not avalable for now

[Madgeni]

Ok, that's a different issue. Will raise it with Google (they'd assured me that all languages were now supported)

[Madgeni]

I've tested the same, GH tells me that this function is not avalable for now

Can you give me an example phrase or two (in Spanish) which isn't working? Google have asked for some examples?