What PIR to buy?

Topics (not sure which fora)
when not sure where to post, post here and mods will move it to right forum.

Moderators: leecollings, remb0

Post Reply
LennartIsHigh
Posts: 11
Joined: Thursday 02 November 2017 16:50
Target OS: Raspberry Pi / ODroid
Domoticz version: 4.9700
Location: Rotterdam
Contact:

What PIR to buy?

Post by LennartIsHigh »

Hi everyone,

For my new home I am looking for motion detection
to work with domoticz. I already have one (for testing) 433mhz Kerui device but internet learns me that those
batteries don't last very long. In my present home there is a security system installed that somehow uses the 433mhz frequency but is invisible in domoticz (RFXcomm). This system uses AA batteries that last more than a year. The Kerui devices last for a few months.

So my question is: what kind of motion detectors do you use? I am starting from scratch so every option is open.

Kind regards!
pvm
Posts: 550
Joined: Tuesday 17 June 2014 22:14
Target OS: NAS (Synology & others)
Domoticz version: 4.10538
Location: NL
Contact:

Re: What PIR to buy?

Post by pvm »

I use Fibaro motion sensors (zwave). Not cheap, but the come with a nice load of configurable options.
Battery life is depending on configuration of reports (temp/ lumen) but can be easily over a year
Synology NAS, slave PI3, ZWave (Fibaro), Xiaomi zigbee devices, BTLE plant sensor, DzVents, Dashticz on tablet, Logitech Media Server
niki_lauda
Posts: 115
Joined: Saturday 31 August 2013 14:48
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Eindhoven (NL)
Contact:

Re: What PIR to buy?

Post by niki_lauda »

LennartIsHigh wrote: Friday 17 August 2018 14:43 Hi everyone,

For my new home I am looking for motion detection
to work with domoticz. I already have one (for testing) 433mhz Kerui device but internet learns me that those
batteries don't last very long. In my present home there is a security system installed that somehow uses the 433mhz frequency but is invisible in domoticz (RFXcomm). This system uses AA batteries that last more than a year. The Kerui devices last for a few months.

So my question is: what kind of motion detectors do you use? I am starting from scratch so every option is open.

Kind regards!
I am using this one for years now.
https://www.klikaanklikuit.nl/nl/pir-2050.html
User avatar
bbqkees
Posts: 407
Joined: Sunday 17 August 2014 21:01
Target OS: Linux
Domoticz version: 4.1x
Location: The Netherlands
Contact:

Re: What PIR to buy?

Post by bbqkees »

I use the Fibaro Eye and the Xiaomi Zigbee ones.
Both work well, but in my case the Xiaomi gateway you need as well sometimes loses connection with Domoticz and it sends ALL of the movements and actions to Chinese servers as well.

The Fibaro Eye has a extreme battery lifetime if you only enable the movement detection.
Bosch / Nefit / Buderus / Junkers / Worcester / Sieger EMS bus Wi-Fi MQTT Gateway and interface boards: https://bbqkees-electronics.nl/
Derik
Posts: 1601
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: What PIR to buy?

Post by Derik »

Just buy a xiaomi bridge and use them pir...
The best there are
Cheap fast and much better then bettery zwave devices.
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
LennartIsHigh
Posts: 11
Joined: Thursday 02 November 2017 16:50
Target OS: Raspberry Pi / ODroid
Domoticz version: 4.9700
Location: Rotterdam
Contact:

Re: What PIR to buy?

Post by LennartIsHigh »

Thank you all for your replies! I really like the Xiaomi system because of the looks. The thing I dislike is the fact that all information travels to China for I don't know what reason.

I already have the Aeotec Z-wave USB and by that the Fibaro Eye must be perfect for me.

Luckily for me I don't have to make a decision yet... there is some more studying for me to do.
Derik
Posts: 1601
Joined: Friday 18 October 2013 23:33
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Arnhem/Nijmegen Nederland
Contact:

Re: What PIR to buy?

Post by Derik »

LennartIsHigh wrote: Monday 20 August 2018 21:53 Thank you all for your replies! I really like the Xiaomi system because of the looks. The thing I dislike is the fact that all information travels to China for I don't know what reason.

I already have the Aeotec Z-wave USB and by that the Fibaro Eye must be perfect for me.

Luckily for me I don't have to make a decision yet... there is some more studying for me to do.
mm i think you can use a firewall
Xu4: Beta Extreme antenna RFXcomE,WU Fi Ping ip P1 Gen5 PVOutput Harmony HUE SolarmanPv OTG Winddelen Alive ESP Buienradar MySensors WOL Winddelen counting RPi: Beta SMAspot RFlinkTest Domoticz ...Different backups
LennartIsHigh
Posts: 11
Joined: Thursday 02 November 2017 16:50
Target OS: Raspberry Pi / ODroid
Domoticz version: 4.9700
Location: Rotterdam
Contact:

Re: What PIR to buy?

Post by LennartIsHigh »

Will it work without connection to the mothership in China?
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 0 guests