Code: Select all
local FAN_NAME_HIGH = 'Ventilatie: Hoog'
local FAN_NAME_MIDDLE = 'Ventilatie: Midden'
local KEUKEN_SENSOR_NAME = 'Keuken'
local BADKAMER_SENSOR_NAME = 'Badkamer'
local WASHOK_SENSOR_NAME = 'Washok'
local CO_SENSOR_NAME = 'CO Sensor'
local BUITEN_SENSOR_NAME = 'Buiten'
local HUMIDITY_SETTING_DEVICE_NAME = 'Humidity setting'
local QUIET_SWITCH_NAME = 'Slaaptijd'
local WC_AFZUIGING_SWITCH_NAME = 'WC Afzuiging'
local NIEMAND_THUIS_SWITCH_NAME = 'Niemand thuis'
return {
-- active = true ,
on = {
-- devices = { '*' },
devices = {
BADKAMER_SENSOR_NAME,
KEUKEN_SENSOR_NAME,
WASHOK_SENSOR_NAME,
BUITEN_SENSOR_NAME,
HUMIDITY_SETTING_DEVICE_NAME,
QUIET_SWITCH_NAME,
WC_AFZUIGING_SWITCH_NAME,
NIEMAND_THUIS_SWITCH_NAME,
CO_SENSOR_NAME
}
-- variables = { ... },
-- timer = { 'every minute' }
-- security = { ... }
},
-- logging = {
-- level = domoticz.LOG_INFO
---- level = domoticz.LOG_DEBUG
-- },
data = {
humidityTarget = {initial = 60},
humidityBinnen = {initial = 0},
humidityBuiten = {initial = 0},
tempBuiten = {initial = 0},
tempBinnen = {initial = 0},
manual = {initial = false},
CODetected = {initial = false},
quiet_time = {initial = false},
niemand_thuis = {initial = false},
wc_afzuiging = {initial = false}
},
execute = function(domoticz, device, triggerInfo)
if (domoticz.EVENT_TYPE_TIMER == triggerInfo.type) then
domoticz.log( 'timer event: '..tostring(triggerInfo.trigger)..'.')
elseif (domoticz.EVENT_TYPE_DEVICE == triggerInfo.type) then
domoticz.log( 'device event: '..device.name..', deviceType: '..device.deviceType..'.')
if (device.name == BUITEN_SENSOR_NAME) then
if (domoticz.data.humidityBuiten ~= device.humidity) then
domoticz.log(device.name..': '..tostring(domoticz.data.humidityBuiten)..' -> '..tostring(device.humidity)..'.', domoticz.LOG_FORCE)
domoticz.data.humidityBuiten = device.humidity
end
if (domoticz.data.tempBuiten ~= device.temperature) then
domoticz.log(device.name..': '..tostring(domoticz.data.tempBuiten)..' -> '..tostring(device.temperature)..'.', domoticz.LOG_FORCE)
domoticz.data.tempBuiten = device.temperature
end
elseif (device.name == CO_SENSOR_NAME) then
if ((device.state == 'On' and domoticz.data.CODetected ~= true) or (device.state == 'Off' and domoticz.data.CODetected ~= false)) then
domoticz.log(device.name..': '..tostring(domoticz.data.CODetected)..' -> '..tostring(device.state == 'On')..'.')
domoticz.data.CODetected = (device.state == 'On')
end
elseif (device.name == QUIET_SWITCH_NAME) then
if ((device.state == 'On' and domoticz.data.quiet_time ~= true) or (device.state == 'Off' and domoticz.data.quiet_time ~= false)) then
domoticz.log(device.name..': '..tostring(domoticz.data.quiet_time)..' -> '..tostring(device.state == 'On')..'.')
domoticz.data.quiet_time = (device.state == 'On')
end
elseif (device.name == NIEMAND_THUIS_SWITCH_NAME) then
if ((device.state == 'On' and domoticz.data.niemand_thuis ~= true) or (device.state == 'Off' and domoticz.data.niemand_thuis ~= false)) then
domoticz.log(device.name..': '..tostring(domoticz.data.niemand_thuis)..' -> '..tostring(device.state == 'On')..'.')
domoticz.data.niemand_thuis = (device.state == 'On')
end
elseif (device.name == WC_AFZUIGING_SWITCH_NAME) then
if ((device.state == 'On' and domoticz.data.wc_afzuiging ~= true) or (device.state == 'Off' and domoticz.data.wc_afzuiging ~= false)) then
domoticz.log(device.name..': '..tostring(domoticz.data.wc_afzuiging)..' -> '..tostring(device.state == 'On')..'.')
domoticz.data.wc_afzuiging = (device.state == 'On')
end
elseif (device.name == HUMIDITY_SETTING_DEVICE_NAME) then
if (device.level ~= domoticz.data.humidityTarget) then
-- My humidity sensors won't indicate higher than 90%, so I don't allow
-- a setting higher than 90% either or the fans will never stop.
domoticz.data.humidityTarget = math.min(device.level, 90)
if (device.level ~= domoticz.data.humidityTarget) then
domoticz.log(device.name..': '..tostring(device.level)..' -> '..tostring(domoticz.data.humidityTarget)..'.')
device.switchSelector(domoticz.data.humidityTarget)
end
end
domoticz.log(device.name..': '..tostring(domoticz.data.manual)..' -> '..tostring(device.state == 'On')..'.')
if ((device.state == 'On' and domoticz.data.manual ~= false) or (device.state == 'Off' and domoticz.data.manual ~= true)) then
domoticz.log(device.name..': '..tostring(domoticz.data.manual)..' -> '..tostring(device.state == 'On')..'.')
domoticz.data.manual = (device.state ~= 'On')
end
elseif (device.name == KEUKEN_SENSOR_NAME or device.name == BADKAMER_SENSOR_NAME or device.name == WASHOK_SENSOR_NAME) then
local sensors = domoticz.devices().filter({ KEUKEN_SENSOR_NAME, BADKAMER_SENSOR_NAME, WASHOK_SENSOR_NAME})
local max_humidity = sensors.reduce(
function(acc, device)
if (device.timedOut ~= true) then -- device.lastUpdate.hoursAgo <= 4) then
if (acc == nil or device.humidity > acc) then
acc = device.humidity
end
end
return acc -- always return the accumulator
end,
nil) -- nil is the initial value for the accumulator
if (max_humidity ~= nil) then
if (domoticz.data.humidityBinnen ~= max_humidity) then
domoticz.log(device.name..': max humidity '..tostring(domoticz.data.humidityBinnen)..' -> '..tostring(max_humidity)..'.', domoticz.LOG_INFO)
domoticz.data.humidityBinnen = max_humidity
end
end
local max_temperature = sensors.reduce(
function(acc, device)
if (device.timedOut ~= true) then --device.lastUpdate.hoursAgo <= 4) then
if (acc == nil or (math.floor(device.temperature * 10 + 0.05)) / 10 > acc) then
acc = math.floor(device.temperature * 10 + 0.05) / 10
end
end
return acc -- always return the accumulator
end,
nil) -- nil is the initial value for the accumulator
if (max_temperature ~= nil) then
if (domoticz.data.tempBinnen ~= max_temperature) then
domoticz.log(device.name..': max temperature '..tostring(domoticz.data.tempBinnen)..' -> '..tostring(max_temperature)..'.', domoticz.LOG_INFO)
domoticz.data.tempBinnen = max_temperature
end
end
end
local measured_humidity = domoticz.data.humidityBinnen
local target_humidity = math.max(domoticz.data.humidityTarget, domoticz.data.humidityBuiten - 20)
domoticz.log('Max humidity '..tostring(domoticz.data.humidityBinnen)..', setpoint: '..tostring( domoticz.data.humidityTarget)..', buiten: '..tostring( domoticz.data.humidityBuiten)..', target: '..tostring(target_humidity)..'.', domoticz.LOG_FORCE)
if (domoticz.data.CODetected == true or domoticz.data.manual ~= true) then
local fan_middle
local fan_high
if (domoticz.data.CODetected == true) then
domoticz.log('CO detected!', domoticz.LOG_FORCE)
fan_middle = 'On'
fan_high = 'On'
elseif (measured_humidity >= 90 and domoticz.data.quiet_time ~= true) then
domoticz.log('humidity >= 90%', domoticz.LOG_FORCE)
fan_middle = 'On'
fan_high = 'On'
elseif (measured_humidity > target_humidity + 3
-- If the humidity is more than 3% over the target, set
-- ventilation to "high".
and domoticz.data.quiet_time ~= true -- But, during the night I don't want the fans to go
-- howling, even if it's wet.
-- and (math.abs(domoticz.data.tempBinnen - measured_humidity) >= 2
-- or measured_humidity > domoticz.data.humidityBuiten)) then
-- -- And, if there is hardly no temperature difference between
-- -- inside and outside, my WTW will not have any condensation,
-- -- so no water will be extracted from the incoming air. It is
-- -- a waste of energy to replace large volumes of inside air
-- -- by outside air unless that outside air is dryer than the
-- -- inside air.
) then
domoticz.log('Humidity more than 3% over target', domoticz.LOG_FORCE)
fan_middle = 'On'
fan_high = 'On'
elseif (measured_humidity > target_humidity or domoticz.data.wc_afzuiging == true) then
domoticz.log('Humidity over target', domoticz.LOG_FORCE)
fan_middle = 'On'
-- if (domoticz.data.niemand_thuis) then
-- fan_high = 'On'
-- else
fan_high = 'Off'
-- end
else
-- domoticz.log('Humidity at or under target', domoticz.LOG_FORCE)
fan_middle = 'Off'
fan_high = 'Off'
end
local device_middle = domoticz.devices(FAN_NAME_MIDDLE)
if (device_middle.state ~= fan_middle) then
domoticz.log('Fan '..device_middle.name..': '..tostring(device_middle.state)..' -> '..tostring(fan_middle)..'.', domoticz.LOG_INFO)
if (fan_middle == 'On') then
device_middle.switchOn()
else
device_middle.switchOff()
end
end
local device_high = domoticz.devices(FAN_NAME_HIGH)
if (device_high.state ~= fan_high) then
domoticz.log('Fan '..device_high.name..': '..tostring(device_high.state)..' -> '..tostring(fan_high)..'.', domoticz.LOG_INFO)
if (fan_high == 'On') then
device_high.switchOn()
else
device_high.switchOff()
end
end
-- else
-- domoticz.log('Fans are on manual control.')
end
elseif (domoticz.EVENT_TYPE_VARIABLE == triggerInfo.type) then
domoticz.log( 'variable event: '..tostring(triggerInfo.trigger)..'.')
elseif (domoticz.EVENT_TYPE_SECURITY == triggerInfo.type) then
domoticz.log( 'security event: '..tostring(triggerInfo.trigger)..'.')
end
end
}
. I do not have earlier (simpler) versions of the script any more, so I am going to give you what I've got right now and tell you what it does later on:
