Xiaomi Smart Home Suite (very cheap) compatibilty?

[lazara007]

Apparently there's now a working plugin working for Zigate: https://www.domoticz.com/wiki/Zigate

Anyone tried it?

I tried Xiaomi power socket and Aqara motion sensor, more or less works.

But I have error messages in the log:

2018-05-13 08:21:29.353 Error: (Zigate) 'onMessage' failed 'KeyError'.
2018-05-13 08:21:29.353 Error: (Zigate) ----> Line 307 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function onMessage
2018-05-13 08:21:29.355 Error: (Zigate) ----> Line 121 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function onMessage
2018-05-13 08:21:29.356 Error: (Zigate) ----> Line 372 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function ZigateDecode
2018-05-13 08:21:29.358 Error: (Zigate) ----> Line 616 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function ZigateRead
2018-05-13 08:21:29.360 Error: (Zigate) ----> Line 777 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function Decode8102
2018-05-13 08:21:29.360 Error: (Zigate) ----> Line 1190 in /home/pi/domoticz/plugins/Domoticz-Zigate/plugin.py, function ReadCluster

[quack3d]

Looks to be reported here: https://github.com/sasu-drooz/Domoticz-Zigate/issues/81

But I don't understand French.

[1981nick1981]

Hi,
Aqara has released a new version of the cube, on a forum I read that this is currently not accepted in domoticz by the new naming. Is there a possibility to get it working?

Code: Select all

2018-05-15 08:10:01.471 XiaomiGateway: unhandled model: sensor_cube.aqgl01

Link:
https://github.com/Danielhiversen/PyXia ... /issues/67

[Derik]

dear all..
I see a new yeelight bulb??
Someone has this type working in Domoticz?

https://nl.aliexpress.com/item/YEELIGHT ... autifyAB=0

[waaren]

dear all..
I see a new yeelight bulb??
Someone has this type working in Domoticz?

https://nl.aliexpress.com/item/YEELIGHT ... autifyAB=0

Works like a charm. Exactly the same way the previous versions were added to domoticz.
(connect to Yeelight app, enable LAN control on bulb, remember IP , add device in Yeelight hardware in domoticz, set device active in domoticz,give bulb fixed IP on your router)

[DAVIZINHO]

Hello,
I have a power socket wall, and detects only the switch (on/off) not consumption (in mihome it detects the consumption). Anyone have this device???

[Derik]

is there perhaps a maximum part of devices that the bridge can handle?? [ or domoticz? ]
How many?

[DennisD]

Anybody got the aqara curtains working with domoticz? I can add the blind switch (learn mode) but i cannot operate it, nor does it change status when controlling it with the mi home app.

[Derik]

mmm looks promissing... And the rails?? does it fit on other systems???

[DennisD]

No Idea, if it fits other systems. I just ordered the dt82 rail from alie but I have seen on tweakers.net it should fit the somfy rails

[Derik]

where is the tweakers topic?

WAF like elektric curtains so i make her happy WAF happy me happy

[DennisD]

Sorry, i have read it wrong. The person orderd a somfy rail plus motor and discused about the lengte of the rail and shipping.

https://gathering.tweakers.net/forum/li ... /1811109/0

Tweakers.net URL for xiaomi goodies

[remb0]

Aqara Smart Wireless Switch

Coupon: GBMAYNEWFY Prise: from: 5 for: 4.26

[DAVIZINHO]

Hello,
Someone have the aqara vima smart lock ??

[snellejellep]

i got the gateway with some sensors but the gateway disconnects after 12 hours or so and then i have to set it up with the app again. someone experience with this?

[DAVIZINHO]

since last betas, my socket dont show consumption. anyone more?

[Derik]

mm dear all..
there is a new update of te yeelight app???
I cannot come into the yeelght app?
Only to the mihome app...
Only in the mihome i cannot set the new bulb into the lan option..
Someone can help me??

[Derik]

no one knows???

[Derik]

Dear all.
Are this lights also supported?
https://www.yeelight.com/en_US/product/luna-se

[snellejellep]

yes, there is a seperate hardware thingy for that: https://www.domoticz.com/wiki/Yeelight
note: do not forget to turn on lan access in the yeelight app otherwise domoticz wont find your lights, i spent hours troubleshooting but i forgot that step