light sensor polling interval gateway xiaomi

[remko2000]

there is a possibility to set somewhere an interval where every 10 minutes the lux value from the sensor inside the xiaomi gateway (v2) is forwarded to domoticz?

[waaren]

on my system the xiaomi Lux is a device. I am not 100% sure but if I remember correctly it was automatically created when adding the hardware to domoticz. Could you check if it is not already on your system (maybe in the unused devices area ) ?

lux.PNG (10.72 KiB) Viewed 1484 times

[remko2000]

Yes it is a device and I see now that the luxvalue get updated but sometimes 1 time in an hour and sometimes 6 times. I don' t understand the logical behind this and would like to control it by myself.

[waaren]

Yes it is a device and I see now that the luxvalue get updated but sometimes 1 time in an hour and sometimes 6 times. I don' t understand the logical behind this and would like to control it by myself.

It's a known gateway problem and cannot be solved by domoticz. (dirty) Workaround is to send an on/off to the internal gateway light, forcing the Lux sensor to measure the light and update it's value.

[remko2000]

Ok thx. I will try that workaround.

[DAVIZINHO]

hello.
The light must be on any time? or if i set lighton and lightoff this works?
Becasue if the script set one after the other, the light not turn on and maybe is a good woorkaround