Neo Coolcam cheap wifi plug
Moderator: leecollings
-
- Posts: 317
- Joined: Thursday 12 January 2017 15:30
- Target OS: Linux
- Domoticz version: Beta Ch
- Location: Finland
- Contact:
Neo Coolcam cheap wifi plug
Any one tried these, can they be integrated to domoticz:
https://www.aliexpress.com/item/NEO-COO ... autifyAB=0
https://www.aliexpress.com/item/NEO-COO ... autifyAB=0
-----------------------------------------
Smartthings
zigbee2mqtt
RFLink 433mhz / Nrf 2.4Ghz
Mi Light
esp8266MiLight Hub
OpenHab/HomeAssistant/Domoticz
HP T610 & Debian 5.10.19-1 x86_64[/b]
Smartthings
zigbee2mqtt
RFLink 433mhz / Nrf 2.4Ghz
Mi Light
esp8266MiLight Hub
OpenHab/HomeAssistant/Domoticz
HP T610 & Debian 5.10.19-1 x86_64[/b]
-
- Posts: 331
- Joined: Wednesday 21 December 2016 9:11
- Target OS: Raspberry Pi / ODroid
- Domoticz version: current
- Contact:
Re: Neo Coolcam cheap wifi plug
I try to avoid wifi stuff. Too hackable.
-
- Posts: 40
- Joined: Saturday 02 July 2016 13:54
- Target OS: NAS (Synology & others)
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Neo Coolcam cheap wifi plug
@blauwebuis, what do you mean by to hackable? Why is a Wifi plug more hackable than for example the z-wave (or 433 mhz, which is far more hackable)?
Next to that, I saw the Coolcam Motion sensor wifi version also, don't know if that one is implemented in Domoticz?
Next to that, I saw the Coolcam Motion sensor wifi version also, don't know if that one is implemented in Domoticz?
Synology DS3615xs | Raspberry pi 3b |
RFXtrx433E | MySensors | Z-wave | Philips Hue | Ikea Tradfri |
Sunscreen | Power switches | Toon | Harmony | UE Smartradio |
Weatherstation | Doorbell | Letterbox reader | Lux | Temp | Humidity | Motion |
RFXtrx433E | MySensors | Z-wave | Philips Hue | Ikea Tradfri |
Sunscreen | Power switches | Toon | Harmony | UE Smartradio |
Weatherstation | Doorbell | Letterbox reader | Lux | Temp | Humidity | Motion |
- LouiS22
- Posts: 433
- Joined: Friday 27 February 2015 13:21
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Budapest, Hungary
- Contact:
Re: Neo Coolcam cheap wifi plug
Not implemented (yet), but you're welcome to do itSteGe wrote: ↑Monday 16 April 2018 10:19 @blauwebuis, what do you mean by to hackable? Why is a Wifi plug more hackable than for example the z-wave (or 433 mhz, which is far more hackable)?
Next to that, I saw the Coolcam Motion sensor wifi version also, don't know if that one is implemented in Domoticz?
-
- Posts: 40
- Joined: Saturday 02 July 2016 13:54
- Target OS: NAS (Synology & others)
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Neo Coolcam cheap wifi plug
haha I'm sure that I'ld be welcome, but I'm afraid that it will be far out of my league...
Synology DS3615xs | Raspberry pi 3b |
RFXtrx433E | MySensors | Z-wave | Philips Hue | Ikea Tradfri |
Sunscreen | Power switches | Toon | Harmony | UE Smartradio |
Weatherstation | Doorbell | Letterbox reader | Lux | Temp | Humidity | Motion |
RFXtrx433E | MySensors | Z-wave | Philips Hue | Ikea Tradfri |
Sunscreen | Power switches | Toon | Harmony | UE Smartradio |
Weatherstation | Doorbell | Letterbox reader | Lux | Temp | Humidity | Motion |
-
- Posts: 317
- Joined: Thursday 12 January 2017 15:30
- Target OS: Linux
- Domoticz version: Beta Ch
- Location: Finland
- Contact:
Re: Neo Coolcam cheap wifi plug
Same here
-----------------------------------------
Smartthings
zigbee2mqtt
RFLink 433mhz / Nrf 2.4Ghz
Mi Light
esp8266MiLight Hub
OpenHab/HomeAssistant/Domoticz
HP T610 & Debian 5.10.19-1 x86_64[/b]
Smartthings
zigbee2mqtt
RFLink 433mhz / Nrf 2.4Ghz
Mi Light
esp8266MiLight Hub
OpenHab/HomeAssistant/Domoticz
HP T610 & Debian 5.10.19-1 x86_64[/b]
-
- Posts: 3
- Joined: Saturday 30 April 2016 10:30
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Neo Coolcam cheap wifi plug
Hi,
any changes? was someone able to implement it in Domoticz?
Greetings, Wim
any changes? was someone able to implement it in Domoticz?
Greetings, Wim
-
- Posts: 34
- Joined: Tuesday 23 February 2016 9:14
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.9700
- Location: NL
- Contact:
Re: Neo Coolcam cheap wifi plug
Would be nice if this will be supported in the future.
-
- Posts: 117
- Joined: Tuesday 24 October 2017 18:32
- Target OS: Linux
- Domoticz version: 4.10159
- Contact:
Re: Neo Coolcam cheap wifi plug
bad product, i bought 2 plug and one of these is already dead
Domoticz on AsRock j3455-ITX 8gb ram - Aeotec ZWave Usb Stick - RFLink 433Mhz
1x Fibaro Wall Plug
1x Fibaro Motion Sensor
x NeoCoolcam Wall Plug
Netatmo Weather Station - Netatmo Thermostat
Philips Hue Bridge
1x Fibaro Wall Plug
1x Fibaro Motion Sensor
x NeoCoolcam Wall Plug
Netatmo Weather Station - Netatmo Thermostat
Philips Hue Bridge
Re: Neo Coolcam cheap wifi plug
Hi,
any changes? was someone able to implement it in Domoticz?
Regards,
Przemek
any changes? was someone able to implement it in Domoticz?
Regards,
Przemek
- sincze
- Posts: 1299
- Joined: Monday 02 June 2014 22:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 2024.4
- Location: Netherlands / Breda Area
- Contact:
Re: Neo Coolcam cheap wifi plug
Just a gentle reminder:
These things have the ability to call their China Homeland Address , and z-wave does not.
Although I've seen them call an IP in Germany as well.
-> Tasmota nice solution, but takes some time for this plug.
In potential these things could be infected remotely. (unless you block them fron internet access ofcourse). As they probably have an IP on your main lan ... the intruder could also be on your main lan.
In addition they are not implemented in Domoticz yet,
Setting them up (search for TUYA plugin on the forum) and extracting the device keys take a lot of time.
And I noticed that these devices are constantly yelling (broadcasting) on my network.
For a bit additional money you have a working z-wave solution.
Pass2php
LAN: RFLink, P1, OTGW, MySensors
USB: RFXCom, ZWave, Sonoff 3
MQTT: ZIgbee2MQTT,
ZWAVE: Zwave-JS-UI
WIFI: Mi-light, Tasmota, Xiaomi Shelly
Solar: Omnik, PVOutput
Video: Kodi, Harmony HUB, Chromecast
Sensors: You name it I got 1.
LAN: RFLink, P1, OTGW, MySensors
USB: RFXCom, ZWave, Sonoff 3
MQTT: ZIgbee2MQTT,
ZWAVE: Zwave-JS-UI
WIFI: Mi-light, Tasmota, Xiaomi Shelly
Solar: Omnik, PVOutput
Video: Kodi, Harmony HUB, Chromecast
Sensors: You name it I got 1.
- LouiS22
- Posts: 433
- Joined: Friday 27 February 2015 13:21
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Budapest, Hungary
- Contact:
Re: Neo Coolcam cheap wifi plug
I theory it should take 3 minutes to flash Tasmota, and if you're lucky, you don't even need to unscrew it... https://github.com/ct-Open-Source/tuya-convertsincze wrote: ↑Monday 25 February 2019 16:36Just a gentle reminder:
These things have the ability to call their China Homeland Address , and z-wave does not.
Although I've seen them call an IP in Germany as well.
-> Tasmota nice solution, but takes some time for this plug.
In potential these things could be infected remotely. (unless you block them fron internet access ofcourse). As they probably have an IP on your main lan ... the intruder could also be on your main lan.
In addition they are not implemented in Domoticz yet,
Setting them up (search for TUYA plugin on the forum) and extracting the device keys take a lot of time.
And I noticed that these devices are constantly yelling (broadcasting) on my network.
For a bit additional money you have a working z-wave solution.
Who is online
Users browsing this forum: No registered users and 1 guest