P1 Smart Meter - Power report empty

[Mooms]

Hi guys,

I hope someone can help me out with my issue.

I’ve successfully installed the P1 Smart Meter and receive all information except for the ‘Power’ report which displays no results.
Real-time ‘Power’ log data is working properly it’s only the report functionlity which displays no figures.

Has anyone experienced the same issue or knows how to resolve this issue?

Thank you in advance.

Martijn

[SweetPants]

Have you waited long enough?

[McMelloW]

If you look at the P1 Smart Meter devices in the devices list.Do you see any values and changes of the values

[Mooms]

It’s now 4 weeks later since I installed the P1 meter, the Gas report shows all details the Power report remains empty since day 1. Is there anything I can check or parameters to be set or reset in order to resolve this? I’ve also stopped and started the Domoticz services as well as rebooted my Raspberry Pi.

[McMelloW]

It’s now 4 weeks later since I installed the P1 meter, the Gas report shows all details the Power report remains empty since day 1. Is there anything I can check or parameters to be set or reset in order to resolve this? I’ve also stopped and started the Domoticz services as well as rebooted my Raspberry Pi.

This odd. You should see something in the report at least after one day. Do you see all values for Electricity on the device?

This is a quick and dirty try. But your P1 smart meter readings so far are lost.
Remove the P1 Smart meter hardware.
Restart Domoticz
Add the P1 smart meter again.

[Mooms]

It’s now 4 weeks later since I installed the P1 meter, the Gas report shows all details the Power report remains empty since day 1. Is there anything I can check or parameters to be set or reset in order to resolve this? I’ve also stopped and started the Domoticz services as well as rebooted my Raspberry Pi.

This odd. You should see something in the report at least after one day. Do you see all values for Electricity on the device?

This is a quick and dirty try. But your P1 smart meter readings so far are lost.
Remove the P1 Smart meter hardware.
Restart Domoticz
Add the P1 smart meter again.

Thank you, good point I will give this a try.

[gerbenvanasselt]

I'm having the same problem. The gas log report contains all logging. But the power report does'nt show anything. How did you solve this problem? I hope you can give me a solution without wiping my historical log files.

Thanks
Gerben

Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk