Dashticz - General Discussions

[lister1308]

I have the same problem, using a minimal config. Automatic positioning also not working. I am running dashticz on a linux system with apache webserver and have domoticz running on a raspberry pi. Did you got it working?

Code: Select all

var config = {}
config['language'] = 'nl_NL'; //or: en_US, de_DE, fr_FR, hu_HU, it_IT, pt_PT, sv_SE
config['domoticz_ip'] = 'http://192.168.xx.xx:8080';
config['user_name'] = 'xxxxx';
config['pass_word'] = 'xxxxx';
config['auto_positioning'] = 1;
config['use_favorites'] = 1;
config['last_update'] = 1;
config['domoticz_refresh'] = 5;
config['dashticz_refresh'] = 60;

var blocks = {}
blocks['blocktitle_domoticz'] = {}
blocks['blocktitle_domoticz']['type'] = 'blocktitle';
blocks['blocktitle_domoticz']['title'] = 'Schakelaars' ;

blocks[154] = {}
blocks[154]['title']= 'Woonkamer bank';

var columns = {}
columns[1] = {}
columns[1]['blocks'] = ['blocktitle_domoticz',154]
columns[1]['width'] = 3 ;

[qwerk]

I am running the latest beta: 2.2
The fullscreen option is working fine. but after a dashticz reload it is back to normal size.
Is there a setting so that it starts in full screen? I could not find it in an discussion on this board.

thanks in advance

[jake]

I am running the latest beta: 2.2
The fullscreen option is working fine. but after a dashticz reload it is back to normal size.
Is there a setting so that it starts in full screen? I could not find it in an discussion on this board.

thanks in advance

I have the same issue, only Kiosk Browser is really full screen. However that browser seems to take more resources, which makes a swipe to the next page on my Tab 2 very slow in reaction.

[tontze]

Hi, dashticz is responding very slowly when switching devices from somewhere else that in dashticz, sometimes states does not update at all ?

[EdwinK]

It doesn't respond at all. Just the basic things are there atm. Weather, flipclock and the trash information. Nothing has changed on the config.

[Aussi]

Hi everybody,

just installed this very nice feature on my Raspberry Pi2 to have another interface than the oldskool domoticz one.

It seems to pick up all my favorites from domoticz, very nice looking.

But now I want to do some editing of the interface. But that doesnt seem to be saved....

For example I want to change the weather location to Utrecht and setup the garbage pickup dates. I set those , save them and F5 the site
but nothing is saved. The weather location goes back to Amsterdam and my garbage details are empty again.

Any one got an idea how to troubleshoot this ? I started the interface with an almost clear CONFIG.js:

Code: Select all

var config = {}
config['domoticz_ip'] = 'https://192.168.0.13:443';
config['app_title'] = 'Dashticz';
config['domoticz_refresh'] = '5';
config['dashticz_refresh'] = '60';

And even after saving the interface the CONFIG.js stays the same like above. Altho the interface is showing my domoticz favorites.... :/

May be some one can give me some tips and tricks

[htilburgs]

Have you tried the Wiki - http://www.domoticz.com/wiki/Dashticz_V2

[Aussi]

Have you tried the Wiki - http://www.domoticz.com/wiki/Dashticz_V2

Yes and I found out that php needs to be enabled. Altho I am also reading that php cant be enabled within domoticz on the RPi to be used for dashticz.

so that's kind of the struggle or maybe its not true what I just mentioned?

[aiolos]

Is this possible yet?

+1 would really safe space

This should be really nice.
In Domoticz it is one block.

In the latest beta it is possible to combine Temp/Humidity/Barometer in one block. There is a configuration option per block, for example:

Code: Select all

blocks[3441] = {single_block: true};

will combine the values in one block for idx 3441.

There is no general setting to change this for all blocks.

Let me know if there are any issues with it.

[Aussi]

So have been struggling some more with how to implement dashticz.

Got some more succes with it but also lost my domoticz page :/
Managed to get it working by installing apache server on my raspberry but that also kicked the domoticz page out :/

I cannot believe this is the good way to go because this stuff is also not mentioned on the Wiki?

I also want to reach the Dashticz interface from outside my home network so that might also be a though one

any one got any bright tips ?

[pollefinario]

Hi All,
Been using Dashticz for a while now and its great.
However since a coupe of days it won't load any devices. It's running on my home server. I've tried a fresh install but that gives the same results.
This are the errors I could find:

Domoticz runs on the latest Beta and nothing is changed with regards to the domoticz url.

Any thoughts? Thanks!

[JuanUil]

Hi Folks,

I am trying to get this wonderful dashboard to work.
Followed the wiki to install, altered ip and port but I get no Favourite switches.
it keeps on saying Loading.
What do I do wrong?




my config:

Code: Select all

var config = {}
config['language'] = 'nl_NL';
config['domoticz_ip'] = 'http://xx.xxx.xx:8080';
config['app_title'] = 'Dashticz';
config['domoticz_refresh'] = '5';
config['dashticz_refresh'] = '60';
config['user_name'] = 'xxxxx';
config['pass_word'] = 'xxxxxxx';
config['loginEnabled'] = 1;



var trashnames = {}
trashnames['Gft'] = 'GFT';
trashnames['Pmd'] = 'Plastic';
trashnames['Rest'] = ''; //LEAVE EMPTY IF YOU WANT TO HIDE IT

var publictransport = {}
publictransport.ovinfobus = { show_via: false, station: 'son-en-breugel/bushalte-penseelkever', provider: '9292-bus', icon: 'bus', width:5, results: 6 }

var tvguide = {}
tvguide.dutch = { key:'dutch', icon: 'fa-television', width:7, channels: [1,3,4,31,46,92], maxitems: 5 }

var _STREAMPLAYER_TRACKS  	= [
	{"track":1,"name":"Q-music","file":"http://icecast-qmusic.cdp.triple-it.nl/Qmusic_nl_live_96.mp3"},
	{"track":2,"name":"538 Hitzone","file":"http://vip-icecast.538.lw.triple-it.nl/WEB11_MP3"},
	{"track":3,"name":"Slam! NonStop","file":"http://stream.radiocorp.nl/web10_mp3"},
	{"track":4,"name":"100%NL","file":"http://stream.100p.nl/100pctnl.mp3"},
  ]; 


var buttons = {}
buttons.nunl = {key: 'nunl',  width:12, icon: 'fa-newspaper-o', title: 'Nu.nl', newwindow:true, url: 'http://www.nu.nl'}
buttons.nos = {key: 'nos',  width:12, icon: 'fa-newspaper-o', title: 'Nos', url: 'http://www.nos.nl'}


var blocks = {}
blocks['blocktitle_1'] = {}
blocks['blocktitle_1']['key'] = 'blocktitle_1';
blocks['blocktitle_1']['type'] = 'blocktitle';
blocks['blocktitle_1']['title'] = 'Example';


var columns = {}
columns['bar'] = {}
columns['bar']['blocks'] = ['logo','miniclock','settings']
					
columns[1] = {}
columns[1]['blocks'] = ['currentweather_big','weather','garbage']
columns[1]['width'] = 5;

columns[2] = {}
columns[2]['blocks'] = ['blocktitle_1',tvguide.dutch,publictransport.ovinfobus]
columns[2]['width'] = 5; 

columns[3] = {}
columns[3]['blocks'] = ['sunrise','streamplayer',buttons.nunl,buttons.nos]
columns[3]['width'] = 2; 

var columns_standby = {}
columns_standby[1] = {}
columns_standby[1]['blocks'] = ['clock','weather']
columns_standby[1]['width'] = 12;

var screens = {}
screens[1] = {}
screens[1]['background'] = 'bg2.jpg';
screens[1]['columns'] = [1,2,3]

any help is highly appreciated

[JuanUil]

Nobody can help me?

[pollefinario]

Juan, Our errors look more or less the same. Not getting any data from domoticz...
What does your Inspector say? (in chrome on windows ctrl - shift - I ), same errors as me?

[DewGew]

You can delete this:

Code: Select all

var trashnames = {}
trashnames['Gft'] = 'GFT';
trashnames['Pmd'] = 'Plastic';
trashnames['Rest'] = ''; //LEAVE EMPTY IF YOU WANT TO HIDE IT

Its not in use anymore. Might not help you but its a start.

[dennis075]

Got the same problems as pollefinario, domoticz error. Running the latest beta. Is there a fix for this problem?

[DewGew]

This is could be a security issue with Domoticz. Login on your browser in Domoticz and then try to use Dashticz in same tab.

[JuanUil]

Tried that already but no success. Also tried another browser also no success

[pollefinario]

No results for me either...

[JuanUil]

Are there more members with this problem?