Dashticz - Show your dashboard and how-to's!
Moderators: leecollings, htilburgs, robgeerts
-
- Posts: 6
- Joined: Tuesday 29 August 2017 17:37
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Location: Almere
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Many thanks to all developers and contributors / testers of this great app.
I started with stable version of Dashticz but after 2 days I ran in a dead-lock because calendar / garbage and news did not show.
So I installed beta release and started over ( well.. copy / paste / trail & error from saved CONFIG.js )
I like to share progress so far of which I am very pleased.
For those who like to know my home automation:
I have Domoticz running on Rasperberry pi3, connected via IFTTT to with Google Home, two Google home mini's , chromecastvideo and audio, 2 x SONY SRs-ZR5's, a bunch of Philips Hue, KaKu switches, 433Mhz transiever, Honeywell round connect thermostat, Logitech Harmony hub, Eminent outdoor camera, Solarpanels with Omnik converter, and smart utility cabinet, sensors on water-gauge.
I started with stable version of Dashticz but after 2 days I ran in a dead-lock because calendar / garbage and news did not show.
So I installed beta release and started over ( well.. copy / paste / trail & error from saved CONFIG.js )
I like to share progress so far of which I am very pleased.
For those who like to know my home automation:
I have Domoticz running on Rasperberry pi3, connected via IFTTT to with Google Home, two Google home mini's , chromecastvideo and audio, 2 x SONY SRs-ZR5's, a bunch of Philips Hue, KaKu switches, 433Mhz transiever, Honeywell round connect thermostat, Logitech Harmony hub, Eminent outdoor camera, Solarpanels with Omnik converter, and smart utility cabinet, sensors on water-gauge.
-
- Posts: 5
- Joined: Saturday 16 September 2017 15:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8796
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Good Morning all!
I'd like to buy a tablet to control dashticz on the wall.
In your opinion, what is the minimum advisable size of the screen in order to have a satisfactory control of the Dashtcz web page?
What tablet do you recommend cheaply that is reliable?
Thanks friends!
I'd like to buy a tablet to control dashticz on the wall.
In your opinion, what is the minimum advisable size of the screen in order to have a satisfactory control of the Dashtcz web page?
What tablet do you recommend cheaply that is reliable?
Thanks friends!
Ciao, Leonardo
-
- Posts: 5
- Joined: Monday 27 June 2016 12:31
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Just started with Dashticz...6 screen setup.. like it ! , especially the customization options.
- Attachments
-
- 20180223_195852.jpg (187.52 KiB) Viewed 5445 times
-
- 20180223_195847.jpg (191.29 KiB) Viewed 5445 times
-
- 20180223_133539.jpg (258.24 KiB) Viewed 5445 times
-
- Posts: 30
- Joined: Saturday 24 February 2018 12:07
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Have been working around with Dasticz and smart meter readings (we have 2 smart meters in our house) and combining it with the agenda of my autistic son. This stuff is amazing and a big thank you to Rob for building this!
I have been able to get things up and running with the help of this forum so also a big thank you to all posters!!
Now busy setting my new Pi up to boot from SSD on USB and when that's done i can start building again and copying everything from my old Pi.
In the meantime there is one thing i can't seem to get solved. I don't have a lot of info on my screen (that's a deliberate choice). To make it line out better (and because it looks better) i want a lot more space between blocks. I placed empty buttons, blocktiles, and a empty frame but i can't seem to get them to look transparent. In the yellow circle is an empty frame with no data. What i want is not to see the frame but the background. How can i best do this?
I have been able to get things up and running with the help of this forum so also a big thank you to all posters!!
Now busy setting my new Pi up to boot from SSD on USB and when that's done i can start building again and copying everything from my old Pi.
In the meantime there is one thing i can't seem to get solved. I don't have a lot of info on my screen (that's a deliberate choice). To make it line out better (and because it looks better) i want a lot more space between blocks. I placed empty buttons, blocktiles, and a empty frame but i can't seem to get them to look transparent. In the yellow circle is an empty frame with no data. What i want is not to see the frame but the background. How can i best do this?
- Attachments
-
- IMG_9185.jpg (114.56 KiB) Viewed 5349 times
-
- Posts: 22
- Joined: Monday 31 July 2017 14:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Kun je mij vertellen hoe jij die trafficmap met files werkend hebt gekregen?Beschuitje wrote: ↑Monday 26 February 2018 10:42 Have been working around with Dasticz and smart meter readings (we have 2 smart meters in our house) and combining it with the agenda of my autistic son. This stuff is amazing and a big thank you to Rob for building this!
I have been able to get things up and running with the help of this forum so also a big thank you to all posters!!
Now busy setting my new Pi up to boot from SSD on USB and when that's done i can start building again and copying everything from my old Pi.
In the meantime there is one thing i can't seem to get solved. I don't have a lot of info on my screen (that's a deliberate choice). To make it line out better (and because it looks better) i want a lot more space between blocks. I placed empty buttons, blocktiles, and a empty frame but i can't seem to get them to look transparent. In the yellow circle is an empty frame with no data. What i want is not to see the frame but the background. How can i best do this?
IMG_9185.jpg
-
- Posts: 667
- Joined: Wednesday 08 March 2017 9:42
- Target OS: Linux
- Domoticz version: 3.8993
- Location: Amsterdam
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
English forum, so please no dutch here
RPi3 B+, Debain Stretch, Domoticz, Homebridge, Dashticz, RFLink, Milight, Z-Wave, Fibaro, Nanoleaf, Nest, Harmony Hub, Now try to understand pass2php
-
- Posts: 104
- Joined: Tuesday 08 November 2016 14:03
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Poland
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
E.g.
Code: Select all
columns[15] = {} //Graphs2
columns[15]['blocks'] = ['graph_121','graph_118'];
columns[15]['width'] = 5;
HW:Raspberry PiB+,Pi3,PiB,RFLink,FA20RF,DCS-930L,DCS-935L,Clarus switches,RF Temp sensors,Owl Micro+,Mi Flora,Kerui,Yeelight,Xiaomi,Broadlink RMM3,Alexa
SF:Jessie,Dmtcz 3.8153,Logitech Media srv,PiCorePlayers,Dashticz,Max2Play,InfluxDB,Grafana,HABridge
SF:Jessie,Dmtcz 3.8153,Logitech Media srv,PiCorePlayers,Dashticz,Max2Play,InfluxDB,Grafana,HABridge
- htilburgs
- Posts: 464
- Joined: Tuesday 03 November 2015 11:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Try this in your custom.cssBeschuitje wrote: ↑Monday 26 February 2018 10:42 Have been working around with Dasticz and smart meter readings (we have 2 smart meters in our house) and combining it with the agenda of my autistic son. This stuff is amazing and a big thank you to Rob for building this!
I have been able to get things up and running with the help of this forum so also a big thank you to all posters!!
Now busy setting my new Pi up to boot from SSD on USB and when that's done i can start building again and copying everything from my old Pi.
In the meantime there is one thing i can't seem to get solved. I don't have a lot of info on my screen (that's a deliberate choice). To make it line out better (and because it looks better) i want a lot more space between blocks. I placed empty buttons, blocktiles, and a empty frame but i can't seem to get them to look transparent. In the yellow circle is an empty frame with no data. What i want is not to see the frame but the background. How can i best do this?
IMG_9185.jpg
Code: Select all
/* Background blocks */
.transbg.col-xs-1,
.transbg.col-xs-2,
.transbg.col-xs-3,
.transbg.col-xs-4,
.transbg.col-xs-5,
.transbg.col-xs-6,
.transbg.col-xs-7,
.transbg.col-xs-8,
.transbg.col-xs-9,
.transbg.col-xs-10,
.transbg.col-xs-11,
.transbg.col-xs-12 {
padding-top:15px;
padding-bottom:15px;
border: 3px solid rgba(255,255,255,0); /* border: 7px -> 3px - Smaller space between blocks */
background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> 0,0,0,0 makes transparent */
background-clip: padding-box;
border-radius: 15px; /* Round corners */
}
Transparant blocks:
Code: Select all
background: rgba(0,0,0,0.1);
Code: Select all
border: 3px solid rgba(255,255,255,0);
Code: Select all
border-radius: 15px;
If you only like your blocktitles transparant, use:
Code: Select all
div.mh.titlegroups {
height: 20px !important;
padding-top: 3px !important;
background: rgba(0,0,0,0);
}
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
- htilburgs
- Posts: 464
- Joined: Tuesday 03 November 2015 11:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Just to give an impression of my current dashboard. Try to make it simple and clean.
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
- EdwinK
- Posts: 1820
- Joined: Sunday 22 January 2017 21:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Rhoon
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Indeed, nice and clean.
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
-
- Posts: 30
- Joined: Saturday 24 February 2018 12:07
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Thanks htilburgs!
I did this in CSS for the round corners but without:
background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> makes transparent */
So i hope that will work
I tried making bigger spaces between blocks with the border code but than the text and images get out of sync.
I will play with it and see what works. I finally have usb boot with an ssd drive working om my new Pi. Somehow an image of the old installation didn't boot so i had to do a new Raspbian install. I will back-up Domoticz and Dashticz from my old install so i can start trying.
I can only then post my config.js wmmudde.
Nice dash btw. The security cam integration is on my future wish list.
I did this in CSS for the round corners but without:
background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> makes transparent */
So i hope that will work
Code: Select all
/* Background blocks */
.transbg.col-xs-1,
.transbg.col-xs-2,
.transbg.col-xs-3,
.transbg.col-xs-4,
.transbg.col-xs-5,
.transbg.col-xs-6,
.transbg.col-xs-7,
.transbg.col-xs-8,
.transbg.col-xs-9,
.transbg.col-xs-10,
.transbg.col-xs-11,
.transbg.col-xs-12 {
padding-top:15px;
padding-bottom:15px;
border: 3px solid rgba(255,255,255,0); /* border: 7px -> 3px - Smaller space between blocks */
background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> 0,0,0,0 makes transparent */
background-clip: padding-box;
border-radius: 15px; /* Round corners */
}
I will play with it and see what works. I finally have usb boot with an ssd drive working om my new Pi. Somehow an image of the old installation didn't boot so i had to do a new Raspbian install. I will back-up Domoticz and Dashticz from my old install so i can start trying.
I can only then post my config.js wmmudde.
Nice dash btw. The security cam integration is on my future wish list.
Last edited by Beschuitje on Tuesday 27 February 2018 11:21, edited 1 time in total.
- EdwinK
- Posts: 1820
- Joined: Sunday 22 January 2017 21:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Rhoon
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Care to share?
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
-
- Posts: 22
- Joined: Monday 31 July 2017 14:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Hi, great looking F1 calender! Can you send me the config for that?htilburgs wrote: ↑Monday 26 February 2018 22:51Try this in your custom.cssBeschuitje wrote: ↑Monday 26 February 2018 10:42 Have been working around with Dasticz and smart meter readings (we have 2 smart meters in our house) and combining it with the agenda of my autistic son. This stuff is amazing and a big thank you to Rob for building this!
I have been able to get things up and running with the help of this forum so also a big thank you to all posters!!
Now busy setting my new Pi up to boot from SSD on USB and when that's done i can start building again and copying everything from my old Pi.
In the meantime there is one thing i can't seem to get solved. I don't have a lot of info on my screen (that's a deliberate choice). To make it line out better (and because it looks better) i want a lot more space between blocks. I placed empty buttons, blocktiles, and a empty frame but i can't seem to get them to look transparent. In the yellow circle is an empty frame with no data. What i want is not to see the frame but the background. How can i best do this?
IMG_9185.jpg
There are several modifications I use myself:Code: Select all
/* Background blocks */ .transbg.col-xs-1, .transbg.col-xs-2, .transbg.col-xs-3, .transbg.col-xs-4, .transbg.col-xs-5, .transbg.col-xs-6, .transbg.col-xs-7, .transbg.col-xs-8, .transbg.col-xs-9, .transbg.col-xs-10, .transbg.col-xs-11, .transbg.col-xs-12 { padding-top:15px; padding-bottom:15px; border: 3px solid rgba(255,255,255,0); /* border: 7px -> 3px - Smaller space between blocks */ background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> 0,0,0,0 makes transparent */ background-clip: padding-box; border-radius: 15px; /* Round corners */ }
Transparant blocks:Smaller (or bigger) spaces between blocks:Code: Select all
background: rgba(0,0,0,0.1);
Rounded corners:Code: Select all
border: 3px solid rgba(255,255,255,0);
Code: Select all
border-radius: 15px;
If you only like your blocktitles transparant, use:
Just play around with them and see what happens...Code: Select all
div.mh.titlegroups { height: 20px !important; padding-top: 3px !important; background: rgba(0,0,0,0); }
Schermafbeelding 2018-02-26 om 22.57.03.png
I also like to create the color buttons for my Yeelight LED Strip, can you send me that piece also?
-
- Posts: 104
- Joined: Tuesday 08 November 2016 14:03
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Poland
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
F1 calendar is probably just another private calendar on Google.
And color buttons are Selectors in Domoticz with scripts behind.
HW:Raspberry PiB+,Pi3,PiB,RFLink,FA20RF,DCS-930L,DCS-935L,Clarus switches,RF Temp sensors,Owl Micro+,Mi Flora,Kerui,Yeelight,Xiaomi,Broadlink RMM3,Alexa
SF:Jessie,Dmtcz 3.8153,Logitech Media srv,PiCorePlayers,Dashticz,Max2Play,InfluxDB,Grafana,HABridge
SF:Jessie,Dmtcz 3.8153,Logitech Media srv,PiCorePlayers,Dashticz,Max2Play,InfluxDB,Grafana,HABridge
- htilburgs
- Posts: 464
- Joined: Tuesday 03 November 2015 11:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Hi there,wmmudde wrote: ↑Tuesday 27 February 2018 15:19Hi, great looking F1 calender! Can you send me the config for that?htilburgs wrote: ↑Monday 26 February 2018 22:51Try this in your custom.cssBeschuitje wrote: ↑Monday 26 February 2018 10:42 Have been working around with Dasticz and smart meter readings (we have 2 smart meters in our house) and combining it with the agenda of my autistic son. This stuff is amazing and a big thank you to Rob for building this!
I have been able to get things up and running with the help of this forum so also a big thank you to all posters!!
Now busy setting my new Pi up to boot from SSD on USB and when that's done i can start building again and copying everything from my old Pi.
In the meantime there is one thing i can't seem to get solved. I don't have a lot of info on my screen (that's a deliberate choice). To make it line out better (and because it looks better) i want a lot more space between blocks. I placed empty buttons, blocktiles, and a empty frame but i can't seem to get them to look transparent. In the yellow circle is an empty frame with no data. What i want is not to see the frame but the background. How can i best do this?
IMG_9185.jpg
There are several modifications I use myself:Code: Select all
/* Background blocks */ .transbg.col-xs-1, .transbg.col-xs-2, .transbg.col-xs-3, .transbg.col-xs-4, .transbg.col-xs-5, .transbg.col-xs-6, .transbg.col-xs-7, .transbg.col-xs-8, .transbg.col-xs-9, .transbg.col-xs-10, .transbg.col-xs-11, .transbg.col-xs-12 { padding-top:15px; padding-bottom:15px; border: 3px solid rgba(255,255,255,0); /* border: 7px -> 3px - Smaller space between blocks */ background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> 0,0,0,0 makes transparent */ background-clip: padding-box; border-radius: 15px; /* Round corners */ }
Transparant blocks:Smaller (or bigger) spaces between blocks:Code: Select all
background: rgba(0,0,0,0.1);
Rounded corners:Code: Select all
border: 3px solid rgba(255,255,255,0);
Code: Select all
border-radius: 15px;
If you only like your blocktitles transparant, use:
Just play around with them and see what happens...Code: Select all
div.mh.titlegroups { height: 20px !important; padding-top: 3px !important; background: rgba(0,0,0,0); }
Schermafbeelding 2018-02-26 om 22.57.03.png
I also like to create the color buttons for my Yeelight LED Strip, can you send me that piece also?
F1 Kalendar is an ICS file I've imported in Apple iCloud Calendar and set is as a public calendar. I've send you a PM for this.
In the config.js it's just a simple entry with the url of the public calendar:
Code: Select all
var calendars = {}
calendars.f1 = {maxitems: 5, title:'', image:'', icalurl:'webcal://p28-calendars.icloud.com/published/2/xxxxxx'}
After that just create an entry in your config.js like normal. Make sure you look at the variables otherwise you won't see a thing
Code: Select all
config['selector_instead_of_buttons'] = 0; //use for selectors
config['hide_off_button'] = 0; //use for selectors
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
-
- Posts: 30
- Joined: Saturday 24 February 2018 12:07
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
Code: Select all
var config = {}
config['language'] ='nl_NL'; //or: en_US
config['domoticz_ip'] = 'http://xxx.xxx.x.xx:8080';
config['app_title'] = 'Dashticz';
config['domoticz_refresh'] = '60';
config['dashticz_refresh'] = '2';
config['default_news_url'] = 'http://www.nu.nl/rss/algemeen';
config['news_scroll_after'] = '120';
config['standby_after'] = 4;
config['auto_swipe_back_to'] = 1;
config['auto_swipe_back_after'] = '30';
config['auto_slide_pages'] = 0;
config['slide_effect'] = 'slide';
config['standard_graph'] = 'hours';
config['timeformat'] = 'DD-MM-YY HH:mm';
config['calenderformat'] = 'dd DD.MM HH:mm';
config['calenderlanguage'] = 'nl_NL';
config['calenderurl'] = 0;
config['wu_api'] = 'xxxxxxxxxxxxxxxxx';
config['wu_city'] = 'Diemen';
config['wu_name'] = 'Diemen';
config['wu_country'] = 'NL';
config['idx_moonpicture'] = 0;
config['host_nzbget'] = 0;
config['switch_horizon'] = 0;
config['auto_positioning'] = 1;
config['use_favorites'] = 1;
config['last_update'] = 0;
config['hide_topbar'] = 0;
config['hide_seconds'] = 1;
config['use_fahrenheit'] = 0;
config['use_beaufort'] = 0;
config['translate_windspeed'] = 1;
config['static_weathericons'] =0;
config['gm_api'] = 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx';
config['gm_latitude'] = 5x.xxxxxxx;
config['gm_longitude'] = x.xxxxxx0;
config['gm_zoomlevel'] = 8;
config['hide_mediaplayer'] = 1;
var frames = {}
frames.autiplan = {refreshiframe:20000,height:800,frameurl:"https://autiplan.com/viewer/xxxxxxxxxxxxxxxxxxxxxxxx?mode=group-column",width:11}
var publictransport = {}
publictransport.ovinfobus = { show_via: true, station: 'diemen/bushalte-vinkenbrug', show_lastupdate:true, provider: '9292-bus', icon: 'bus', width:6, results: 10 };
var tvguide = {}
tvguide.dutch = { key:'dutch', icon: 'fa-television', width:6, channels: [1,3,4,31,46,92], maxitems: 10}
var maps = {}
maps.location = { height: 280, width:6, latitude: 5x.xxxxxxx, longitude: x.xxxxxx0, zoom:10 }
var _STREAMPLAYER_TRACKS = [
{"track":1,"name":"Radio 1","file":"http://icecast.omroep.nl/radio1-bb-mp3"},
{"track":2,"name":"Radio 2","file":"http://icecast.omroep.nl/radio2-bb-mp3"},
{"track":3,"name":"538","file":"http://playerservices.streamtheworld.com/api/livestream-redirect/RADIO538.mp3"},
{"track":4,"name":"Sky Radio","file":"http://playerservices.streamtheworld.com/api/livestream-redirect/SKYRADIO.mp3"},
];
var buttons = {}
buttons.radio = {image: 'img/radio_on.png', title: 'Radio', url: 'Radio 1","file":"http://icecast.omroep.nl/radio1-bb-mp3'}
buttons.calendarmotogp = {icon: 'fa-calendar', title: 'Kalender MotoGP', url: 'http://www.motogp.com/en.calendar/'}
buttons.calendarf1 = {icon: 'fa-calendar', title: 'Kalender F1', url: 'https://www.formula1.com/en/latest/headlines/2017/9/2018-calendar.html'}
buttons.calendarknzb = {icon: 'fa-calendar', title: 'Kalender KNZB', url:'https://www.knzb.nl/vereniging_wedstrijdsport/wedstrijdsport/webkalender/'}
buttons.buienradar = {width:12, isimage:true, refreshimage:60000, image: 'https://api.buienradar.nl/image/1.0/RadarMapNL?w=285&h=256'}
buttons.verkeer = {width:12, isimage:true, image:'https://www.anwb.nl/verkeer/verkeerstool.js', url: 'https://www.anwb.nl/verkeer/'}
var blocks = {}
blocks['blocktitle_1'] = {}
blocks['blocktitle_1']['key'] = 'blocktitle_1';
blocks['blocktitle_1']['type'] = 'blocktitle';
blocks['blocktitle_1']['title'] = '';
blocks['blocktitle_2'] = {}
blocks['blocktitle_2']['key'] = 'blocktitle_2';
blocks['blocktitle_2']['type'] = 'blocktitle';
blocks['blocktitle_2']['title'] = 'Autiplan';
blocks['blocktitle_3'] = {}
blocks['blocktitle_3']['key'] = 'blocktitle_3';
blocks['blocktitle_3']['type'] = 'blocktitle';
blocks['blocktitle_3']['title'] = 'Slimme meter Nuon';
var columns = {}
columns['bar'] = {}
columns['bar']['blocks'] = ['logo']
columns[1] = {}
columns[1]['blocks'] = ['currentweather_big','blocktitle_1','weather','blocktitle_1','2','3','4','5','6']
columns[1]['width'] = 5;
columns[2] = {}
columns[2]['blocks'] = ['traffic','blocktitle_1' ,publictransport.ovinfobus,maps.location,publictransport.ovinfotrain,'blocktitle_1','train']
columns[2]['width'] = 5;
columns[3] = {}
columns[3]['blocks'] = ['clock','sunrise',buttons.radio,'blocktitle_1',buttons.calendarmotogp,buttons.calendarf1,buttons.calendarknzb,'blocktitle_1',buttons.buienradar]
columns[3]['width'] = 2;
columns[4] = {}
columns[4]['blocks'] = []
columns[4]['width'] = 1;
columns[5] = {}
columns[5]['blocks'] = [frames.autiplan]
columns[5]['width'] = 6;
columns[6] = {}
columns[6]['blocks'] = ['1','graph_1','7','graph_7']
columns[6]['width'] = 5;
var columns_standby = {}
columns_standby[1] = {}
columns_standby[1]['blocks'] = ['blocktitle_1']
columns_standby[1]['width'] = 4;
columns_standby[2] = {}
columns_standby[2]['blocks'] = [frames.autiplan]
columns_standby[2]['width'] = 5;
columns_standby[3] = {}
columns_standby[3]['blocks'] = ['blocktitle_1']
columns_standby[3]['width'] = 3;
var screens = {}
screens['default'] = {}
screens['default']['maxwidth'] = 3200;
screens['default']['maxheight'] = 1800;
screens['default'][1] = {}
screens['default'][1]['background'] = 'bg_morning.jpg';
screens['default'][1]['columns'] = [1,2,3]
screens['default'][2] = {}
screens['default'][2]['background'] = 'bg_morning.jpg';
screens['default'][2]['columns'] = [4,5,6]
screens['default'][3] = {}
screens['default'][3]['background'] = 'bg_morning.jpg';
screens['default'][3]['columns'] = [7,8]
Code: Select all
/* CSS document */
#graphoutput1{height:150px}
#graphoutput7{height:150px}
/* Weather */
.big .weatherdegrees,
.big .weatherloc {
display: inline-block;
margin-top: -2px;
margin-left: 24px; /* move text to the right */
font-size: 35px;
font weight: bold;
}
.skyconsmall {
display: block;
width: 75px;
font-size: 15px;
}
/* sunrise */
.sunriseholder,
.sunriseholder .wi{
font-size:16px !important;
}
.transbg.col-xs-1,
.transbg.col-xs-2,
.transbg.col-xs-3,
.transbg.col-xs-4,
.transbg.col-xs-5,
.transbg.col-xs-6,
.transbg.col-xs-7,
.transbg.col-xs-8,
.transbg.col-xs-9,
.transbg.col-xs-10,
.transbg.col-xs-11,
.transbg.col-xs-12 {
padding-top:15px;
padding-bottom:15px;
border: 3px solid rgba(255,255,255,0);
background: rgba(0,0,0,0.2);
background-clip: padding-box;
border-radius: 15px; /* Rounded corners */
}
div.mh.titlegroups {
height: 50px !important;
padding-top: 3px !important;
background: rgba(0,0,0,0);
}
Hooked it up this morning and just found out my graphs fall off screen so i have to change them.
-
- Posts: 22
- Joined: Monday 31 July 2017 14:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz - Show your dashboard and how-to's!
htilburgs wrote: ↑Wednesday 28 February 2018 17:17Hi there,wmmudde wrote: ↑Tuesday 27 February 2018 15:19Hi, great looking F1 calender! Can you send me the config for that?htilburgs wrote: ↑Monday 26 February 2018 22:51
Try this in your custom.css
There are several modifications I use myself:Code: Select all
/* Background blocks */ .transbg.col-xs-1, .transbg.col-xs-2, .transbg.col-xs-3, .transbg.col-xs-4, .transbg.col-xs-5, .transbg.col-xs-6, .transbg.col-xs-7, .transbg.col-xs-8, .transbg.col-xs-9, .transbg.col-xs-10, .transbg.col-xs-11, .transbg.col-xs-12 { padding-top:15px; padding-bottom:15px; border: 3px solid rgba(255,255,255,0); /* border: 7px -> 3px - Smaller space between blocks */ background: rgba(0,0,0,0); /* rgba(0,0,0,0.1); -> 0,0,0,0 makes transparent */ background-clip: padding-box; border-radius: 15px; /* Round corners */ }
Transparant blocks:Smaller (or bigger) spaces between blocks:Code: Select all
background: rgba(0,0,0,0.1);
Rounded corners:Code: Select all
border: 3px solid rgba(255,255,255,0);
Code: Select all
border-radius: 15px;
If you only like your blocktitles transparant, use:
Just play around with them and see what happens...Code: Select all
div.mh.titlegroups { height: 20px !important; padding-top: 3px !important; background: rgba(0,0,0,0); }
Schermafbeelding 2018-02-26 om 22.57.03.png
I also like to create the color buttons for my Yeelight LED Strip, can you send me that piece also?
F1 Kalendar is an ICS file I've imported in Apple iCloud Calendar and set is as a public calendar. I've send you a PM for this.
In the config.js it's just a simple entry with the url of the public calendar:
The buttons for the Yeelight LED Strip. This is a dummy (selector) switch with code, to address the Yeelight LED Strip.Code: Select all
var calendars = {} calendars.f1 = {maxitems: 5, title:'', image:'', icalurl:'webcal://p28-calendars.icloud.com/published/2/xxxxxx'}
After that just create an entry in your config.js like normal. Make sure you look at the variables otherwise you won't see a thing
Yeelight LED.pngCode: Select all
config['selector_instead_of_buttons'] = 0; //use for selectors config['hide_off_button'] = 0; //use for selectors
thanks for your feedback, i added the private/public calendar and it keeps saying Loading..
when i open my calendar link it is opening the correct ics file.
Do you know how i can fix it?
Who is online
Users browsing this forum: No registered users and 1 guest