Aqara wall plug

[slydiman]

I have installed the Aqara wall plug (ZigBee), model QBCZ11LM.
I don't see it in Domoticz.
It looks like that plug reports the following json:

Code: Select all

{"cmd":"read_ack","model":"","sid":"***","short_id":***,"data":"{\"voltage\":3600}"}

Yes, the model is empty. I don't know how to correctly handle it.
Any ideas?

[ak97]

I have same problem with new Aqara wall switches !

Code: Select all

2018-02-03 17:31:56.907 XiaomiGateway: unhandled model: 
2018-02-03 17:31:56.907 {"cmd":"read_ack","model":"","sid":"158d0001f99222","short_id":53738,"data":"{\"voltage\":3600,\"channel_0\":\"on\"}"}
2018-02-03 17:31:56.907 XiaomiGateway: unhandled model: 
2018-02-03 17:31:56.907 {"cmd":"read_ack","model":"","sid":"158d0001fa1960","short_id":53211,"data":"{\"voltage\":3600}"}
2018-02-03 17:31:56.907 XiaomiGateway: unhandled model: 
2018-02-03 17:31:56.907 {"cmd":"read_ack","model":"","sid":"158d0001fa18e7","short_id":12953,"data":"{\"voltage\":3600}"}

[slydiman]

My Aqara wall switches report the correct model. The only problem is voltage 3300 which means 110%.

Code: Select all

{"cmd":"read_ack","model":"ctrl_neutral1","sid":"***","short_id":32104,"data":"{\"voltage\":3300,\"channel_0\":\"off\"}"}
{"cmd":"read_ack","model":"ctrl_neutral2","sid":"***","short_id":4179,"data":"{\"voltage\":3300,\"channel_0\":\"off\",\"channel_1\":\"off\"}"}

Probably the problem is Xiaomi Gateway firmware.
It looks like a bug in the developer protocol.
Let's wait for the firmware update...

[ak97]

I have two versions of Aqara wall switches:
1) without zero line (For example - QBKG04LM)
2) with zero line (For example - QBKG11LM)

Aqara switches without zero line (1) work correctly
But Aqara switches with zero line (2) have a support problem with domoticz

[Luis97]

Same problem, the wall plug dont appear in the list.

[Chatissimus]

Hi Slydiman,

is your wall plug this one ?
https://xiaomi-mi.com/sockets-and-senso ... e-version/

[slydiman]

Yes, exactly.

[vdbjimmy]

Same problem here. I bought 2 wall plugs QBKG11LM and they are not visible in domoticz. I updated to the last beta version 3.9439 an it is still the same.

Have you succeeded in getting this verson of the wall plugs visible in Domoticz? Thank you.

[DAVIZINHO]

WOW!, not works???
i bought one the last week and i thought it will works

[DAVIZINHO]

Hello again.
I have this wall plug zigbee:
https://xiaomi-mi.com/sockets-and-senso ... e-version/

I installed it today and the domoticz detect the plug as switch type.
Works fine, no problem

But domoticz not detect the aditional device with the consumption kwh.

I have various zigbee plug, and allways detects 2 devices.

any idea??

[1981nick1981]

The problem is also with the new aqara cube. Domoticz recognizes the model but it is not visible between the devices.