Aurora theme

Moderator: leecollings

User avatar
EdwinK
Posts: 1820
Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:

Re: Aurora theme

Post by EdwinK »

Yes.. Got it working :)

Just a remark, maybe just me, but I find that even in 'compact' mode the blocks are too big.
Screen Shot 2017-12-21 at 12.44.47.png
Screen Shot 2017-12-21 at 12.44.47.png (120.05 KiB) Viewed 4839 times
And 2) We can't change the setting in 'general options'? They look clickable, but don't change
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
fkok
Posts: 29
Joined: Thursday 19 January 2017 9:19
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: Netherlands
Contact:

Re: Aurora theme

Post by fkok »

Maybe a stupid question, but can somebody please tell me how i get my camera on the dashboard? I have camera installed, but is isn't showing up on the dashboard.
gajotnt
Posts: 70
Joined: Monday 06 February 2017 12:48
Target OS: Raspberry Pi / ODroid
Domoticz version: V4.9700
Location: Azores
Contact:

Re: Aurora theme

Post by gajotnt »

fkok wrote: Thursday 21 December 2017 13:44 Maybe a stupid question, but can somebody please tell me how i get my camera on the dashboard? I have camera installed, but is isn't showing up on the dashboard.
You need to associate a camera to a switch.
Go to the camera panel, select camera, then add a device to that camera.
fkok
Posts: 29
Joined: Thursday 19 January 2017 9:19
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: Netherlands
Contact:

Re: Aurora theme

Post by fkok »

gajotnt wrote: Thursday 21 December 2017 13:56
fkok wrote: Thursday 21 December 2017 13:44 Maybe a stupid question, but can somebody please tell me how i get my camera on the dashboard? I have camera installed, but is isn't showing up on the dashboard.
You need to associate a camera to a switch.
Go to the camera panel, select camera, then add a device to that camera.
So i have to create a new Virtual on/off switch and add it to the camera?
fkok
Posts: 29
Joined: Thursday 19 January 2017 9:19
Target OS: Raspberry Pi / ODroid
Domoticz version:
Location: Netherlands
Contact:

Re: Aurora theme

Post by fkok »

fkok wrote: Thursday 21 December 2017 13:59
gajotnt wrote: Thursday 21 December 2017 13:56
fkok wrote: Thursday 21 December 2017 13:44 Maybe a stupid question, but can somebody please tell me how i get my camera on the dashboard? I have camera installed, but is isn't showing up on the dashboard.
You need to associate a camera to a switch.
Go to the camera panel, select camera, then add a device to that camera.
So i have to create a new Virtual on/off switch and add it to the camera?
Thanks, it works!!!
jeanclic
Posts: 68
Joined: Saturday 28 January 2017 11:32
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: France / Burgundy
Contact:

Re: Aurora theme

Post by jeanclic »

Hello,

it seems like there is an issue with the custom icons page :
2017-12-21 19_58_49-Domoticz.png
2017-12-21 19_58_49-Domoticz.png (102.1 KiB) Viewed 4759 times
what can I change to correct that ?
RPI3B (Domoticz 4.9700 + ~60 scripts) + RFXtrx433E (fw1020) + Z-Stick Gen5 + MySensors / RPI2B+ (RasPlex)
x1 Eth. wired tablet
x8 T/H Oregon / x1 T/H Bresser
x7 heaters / x2 QUBINO "Flush 1 relay"
x10 plugs / x15 contacts
x4 fibaro / x1 PIR
jeanclic
Posts: 68
Joined: Saturday 28 January 2017 11:32
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: France / Burgundy
Contact:

Re: Aurora theme

Post by jeanclic »

Hello again,

things seems working better since yesterday night update, but still issue with icons as I said in the previous post, and I found an other issue with wind on dashboard :
2017-12-22 18_34_52-Domoticz.png
2017-12-22 18_34_52-Domoticz.png (44.82 KiB) Viewed 4665 times
not correct I think.

Edit: datavisualization still not displaying temperatures below 4°C.
RPI3B (Domoticz 4.9700 + ~60 scripts) + RFXtrx433E (fw1020) + Z-Stick Gen5 + MySensors / RPI2B+ (RasPlex)
x1 Eth. wired tablet
x8 T/H Oregon / x1 T/H Bresser
x7 heaters / x2 QUBINO "Flush 1 relay"
x10 plugs / x15 contacts
x4 fibaro / x1 PIR
Eoreh
Posts: 65
Joined: Tuesday 13 October 2015 13:50
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Poland
Contact:

Re: Aurora theme

Post by Eoreh »

Very cool theme. Should be in "box" domoticz's theme (or even default).
Get fresh ideas to domoticz's theme. My favorite features is : preview camera on dashboard, "grouped items", "shows idx numbers on items"
A great idea is to parameterize the theme in the settings tab

I change this on my default.
Thank You very much!!
dutchdevil83
Posts: 130
Joined: Monday 31 October 2016 19:34
Target OS: Raspberry Pi / ODroid
Domoticz version: latest
Location: Netherlands
Contact:

Re: Aurora theme

Post by dutchdevil83 »

How to change the transparancy of the normal switches/buttons? When setting a custom background it is not readable anymore. For floorplan its fine but not for the rest of the tabs.
screen2.jpg
screen2.jpg (388.5 KiB) Viewed 4556 times
screen1.jpg
screen1.jpg (356.57 KiB) Viewed 4556 times
Hardware
1x Raspberry Pi
1x Razberry Z-Wave
1x RFXtrx433E
1x Toon
1x GoodWe Solarpanels
2x FGSD-002 Smoke Detector
1x FGBS-001 Binaire Sensor (RFID lezer)
7x FGMS-001 Motion Sensor
3x ZW089 Verzonken Deursensor
7x NC Wallplug
&lots of KaKu stuff
Eoreh
Posts: 65
Joined: Tuesday 13 October 2015 13:50
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Poland
Contact:

Re: Aurora theme

Post by Eoreh »

I think you have to check in css file in folder "Aurora".

My dashboard without picture in background looks very ok.
screen.png
screen.png (247.84 KiB) Viewed 4522 times
blauwebuis
Posts: 331
Joined: Wednesday 21 December 2016 9:11
Target OS: Raspberry Pi / ODroid
Domoticz version: current
Contact:

Re: Aurora theme

Post by blauwebuis »

@dutchdevil83 Try renaming the file 'dashboard_highlights_see-through.css' and then reloading the page. Originally most of the transparency was placed inside that file.

I've created a new version.

FIXES
- icon upload page now works. Thanks @jeanclic
- Wind sensors now work fine. Thanks @jeanclic

FEATURES
- Colors and background image is now also stored in Domoticz. For @remb0.
- Choosing the compact option now really makes it compact. Really really. For @EdwinK.
- A "time ago" option that changes the timestamp into a more human readable "3 minutes ago" type of output. Click on the timestamp to switch between the two.

Image

- Battery status indicators. A small icon in the footer of each element will help you see the status at a glance. Hover over the battery icon to see the percentage remaining.
- icon upload page now looks really good if you have the 'submenu sidebar' option enabled.

Image
Last edited by blauwebuis on Saturday 23 December 2017 22:03, edited 1 time in total.
blauwebuis
Posts: 331
Joined: Wednesday 21 December 2016 9:11
Target OS: Raspberry Pi / ODroid
Domoticz version: current
Contact:

Re: Aurora theme

Post by blauwebuis »

@edwinK: where was that bug with the data table?
User avatar
EdwinK
Posts: 1820
Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:

Re: Aurora theme

Post by EdwinK »

It is in the temperature block, at http://*.*.*.*/#/Temperature
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
User avatar
EdwinK
Posts: 1820
Joined: Sunday 22 January 2017 21:46
Target OS: Raspberry Pi / ODroid
Domoticz version: BETA
Location: Rhoon
Contact:

Re: Aurora theme

Post by EdwinK »

blauwebuis wrote: Saturday 23 December 2017 20:47 - Choosing the compact option now really makes it compact. Really really. For @EdwinK.
Thanks. Guess I need to download again
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
Eoreh
Posts: 65
Joined: Tuesday 13 October 2015 13:50
Target OS: Raspberry Pi / ODroid
Domoticz version: beta
Location: Poland
Contact:

Re: Aurora theme

Post by Eoreh »

First i have to say - I love this theme.

From my punkt view to version from today -> 20171223:
- bug:(1) layout by rows ("unchecked -> Vertical columns on the dashboard"): Now in one row i have 5 items and only first 3 items in row have big "size" (icon etc). (see picture)
- bug:(2) layout by rows: 3-th or 2-end row in section have different "column" span. (see picture)
- future:(3) - can You add option to hide "name section". I dont need it and it take only space. For example in function newPage() i added code like this

Code: Select all

$('#dashSwitches > h2').hide();
$('#dashTemperature > h2').hide();
$('#dashUtility > h2').hide();
(see picture - results).
- future / bug:(4) time ago in "merged" item - show for oldest one. In merged item i preferred show "update time" in line each name or at all. Is it possible ?. (see picture)
- future / bug:(5) - I love "big" value with temperature / humidity - etc. In this version value is moved to in "row" with name so it's not the same look as previously.
In central item now show - minor information which is for me less important than value item.

- future / bug:(6) - Datavisualisations is in the same color, witch information in item. When line cross letters its not readable. Maybe change color of line will be better ?.
screen2.png
screen2.png (272.89 KiB) Viewed 4456 times
User avatar
TiXav
Posts: 40
Joined: Saturday 28 November 2015 22:25
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: France
Contact:

Re: Aurora theme

Post by TiXav »

I test this theme, I would like to say impressive !
But; if a proxy is used and a folder is used like this http://host:port/folder then the uservariable API request says error 404 in the dev tools of chrome or firefox so I made a little modification in my custom.js

If the index of the array is not # then there is a folder so needed to add it to the baseURL, perhaps a new way to do this is better...
started from line 55

Code: Select all

var folder ="";
if (pathArray[3]!="#") { folder="/"+pathArray[3] }
var baseURL = protocol + '//' + host + folder ;[code]
[/code]
jeanclic
Posts: 68
Joined: Saturday 28 January 2017 11:32
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: France / Burgundy
Contact:

Re: Aurora theme

Post by jeanclic »

Hello there,

thanks again for this theme ! it looks very better than the default one.
Following last update, I still have a lot to tell about bugs/features. I made 4 pictures to explain :
2017-12-24 11_39_03-Domoticz_remarks-1.png
2017-12-24 11_39_03-Domoticz_remarks-1.png (155.81 KiB) Viewed 4382 times
2017-12-24 11_39_03-Domoticz_remarks-2.png
2017-12-24 11_39_03-Domoticz_remarks-2.png (133.36 KiB) Viewed 4382 times
RPI3B (Domoticz 4.9700 + ~60 scripts) + RFXtrx433E (fw1020) + Z-Stick Gen5 + MySensors / RPI2B+ (RasPlex)
x1 Eth. wired tablet
x8 T/H Oregon / x1 T/H Bresser
x7 heaters / x2 QUBINO "Flush 1 relay"
x10 plugs / x15 contacts
x4 fibaro / x1 PIR
jeanclic
Posts: 68
Joined: Saturday 28 January 2017 11:32
Target OS: Raspberry Pi / ODroid
Domoticz version: Beta
Location: France / Burgundy
Contact:

Re: Aurora theme

Post by jeanclic »

My pictures are too big, so I go on here :
2017-12-24 11_39_03-Domoticz_remarks-3.png
2017-12-24 11_39_03-Domoticz_remarks-3.png (372.86 KiB) Viewed 4381 times
2017-12-24 11_39_03-Domoticz_remarks-4.png
2017-12-24 11_39_03-Domoticz_remarks-4.png (154.97 KiB) Viewed 4381 times
RPI3B (Domoticz 4.9700 + ~60 scripts) + RFXtrx433E (fw1020) + Z-Stick Gen5 + MySensors / RPI2B+ (RasPlex)
x1 Eth. wired tablet
x8 T/H Oregon / x1 T/H Bresser
x7 heaters / x2 QUBINO "Flush 1 relay"
x10 plugs / x15 contacts
x4 fibaro / x1 PIR
Docdigit
Posts: 17
Joined: Saturday 09 September 2017 11:36
Target OS: Raspberry Pi / ODroid
Domoticz version: 2020.2
Location: NL
Contact:

Re: Aurora theme

Post by Docdigit »

gijsje wrote: Sunday 17 December 2017 22:17 I have the issue that it does not show corect but i have it with all the themes.
I did delete the cache and did try ctrl F5
Any ideas?
Image
Same issue overhere - I think it may be an issue with access rights on files after ftp'ing into the proper folder.
Will let you know once I found out...
Happy Xmas,
DD
With both feet on the ground you can't make any step forward...
User avatar
gijsje
Posts: 132
Joined: Saturday 19 August 2017 14:28
Target OS: NAS (Synology & others)
Domoticz version: Stable
Location: Berkel Enschot, NL
Contact:

Re: Aurora theme

Post by gijsje »

are you on the stable version?
I think it only works with beta so i did give up to get to work
I am not going to beta as the timers are not working
Synology DS218+ - RFXtrx433 - Aeotec Z-Stick Gen5 - Toon Thermostat - Neo CoolCam plug - Neo CoolCam PIR - FIBARO PIR - Heiman Smart Smoke Senso - Neo CoolCam Leakage Detector - BeNext Tag Reader - P1 and S0 USB - many Mi-Light lights - KAKU switches
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest