Hi, above 25.5 degree C the temperature reading of my Alecto WS3500 on domoticz (installed on raspberry pi) is multiplied by a factor of two to 51 degree. This looked repeatable last couple of days however.......... since today, may 8th 2016 12:15 the reading is around 41.3 degrees where the value of the Alecto weather station is 28.5 degrees.
Any idea?
Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Moderator: leecollings
- proza
- Posts: 24
- Joined: Friday 12 February 2016 15:49
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 4.11415
- Location: The Netherlands
- Contact:
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Mine WS3500 Alecto temperature is working correct, highest temp. seen today 27,7 Stable version on Raspberry Pi
Verzonden vanaf mijn iPhone met Tapatalk
Verzonden vanaf mijn iPhone met Tapatalk
If you see me collapse, pause my Garmin fenix 3
-
- Posts: 1
- Joined: Sunday 08 May 2016 17:55
- Target OS: Linux
- Domoticz version:
- Contact:
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Same issue here, updated to 1002 firmware for 3500, which did not fix the issue (latest version from git under Ubuntu).
-
- Posts: 517
- Joined: Friday 12 July 2013 18:13
- Target OS: -
- Domoticz version:
- Location: Netherlands
- Contact:
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
will be corrected in the next RFXtrx firmware version
RFXtrx433, RFXtrx433E, RFXtrx433XL, RFX433XL, RFX868XL
-
- Posts: 1
- Joined: Saturday 20 May 2017 22:19
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Incorrect temperature reading above 25.5 degree. C Alecto WS3500
Hi everyone,
I have a alecto WS4500 and I came across this site against.
But the links that I found were unfortunately dead links.
Can anyone tell me how I can read the data from a ws4500 with a raspberry pi?
(I have found that the ws3500 and the ws4500 has use the same sensors?)
Thanks for the effort!
I have a alecto WS4500 and I came across this site against.
But the links that I found were unfortunately dead links.
Can anyone tell me how I can read the data from a ws4500 with a raspberry pi?
(I have found that the ws3500 and the ws4500 has use the same sensors?)
Thanks for the effort!
Who is online
Users browsing this forum: No registered users and 1 guest