Dashticz - General Discussions
Moderators: leecollings, htilburgs, robgeerts
-
- Posts: 1273
- Joined: Saturday 24 January 2015 22:12
- Target OS: NAS (Synology & others)
- Domoticz version: 3.7067
- Location: NL
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Well, I submitted a POSSIBLE fix half an hour ago (or something)...
I dont know if it helps in your case but worth a try...
I dont know if it helps in your case but worth a try...
- EdwinK
- Posts: 1820
- Joined: Sunday 22 January 2017 21:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Rhoon
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Here too.
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
-
- Posts: 26
- Joined: Saturday 15 April 2017 12:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Same result
To be sure do you have a link to get the api key ?
To be sure do you have a link to get the api key ?
- mvveelen
- Posts: 678
- Joined: Friday 31 October 2014 10:22
- Target OS: NAS (Synology & others)
- Domoticz version: Beta
- Location: Hoorn, The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Downloaded the latest 2 minutes ago, overwritten all files, except the config: same problem on multiple devices.
RPi3b+/RFXCOM rfxtrx433E/Shelly/Xiaomi Gateway/Philips HUE Lights/Atag Zone One/2 SunnyBoy inverters/AirconWithMe/P1 smartmeter/Domoticz latest Beta
-
- Posts: 18
- Joined: Saturday 31 January 2015 11:19
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
traffic map is working fine here.
It is important to not place the long, lat and zoomlevel between ticks ' in the config file.
var _MAPS_LATITUDE = 52.090737;
var _MAPS_LONGITUDE = 5.121420;
var _MAPS_ZOOMLEVEL = 11;
It is important to not place the long, lat and zoomlevel between ticks ' in the config file.
var _MAPS_LATITUDE = 52.090737;
var _MAPS_LONGITUDE = 5.121420;
var _MAPS_ZOOMLEVEL = 11;
-
- Posts: 1273
- Joined: Saturday 24 January 2015 22:12
- Target OS: NAS (Synology & others)
- Domoticz version: 3.7067
- Location: NL
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Edit(never mind)
Last edited by robgeerts on Tuesday 25 April 2017 22:18, edited 1 time in total.
-
- Posts: 26
- Joined: Saturday 15 April 2017 12:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
sonar wrote:traffic map is working fine here.
It is important to not place the long, lat and zoomlevel between ticks ' in the config file.
var _MAPS_LATITUDE = 52.090737;
var _MAPS_LONGITUDE = 5.121420;
var _MAPS_ZOOMLEVEL = 11;
HERO !!!
Works like a charm now THNX
-
- Posts: 1273
- Joined: Saturday 24 January 2015 22:12
- Target OS: NAS (Synology & others)
- Domoticz version: 3.7067
- Location: NL
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Why did I not think about that!!
-
- Posts: 26
- Joined: Saturday 15 April 2017 12:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Easy to forget i think
- mvveelen
- Posts: 678
- Joined: Friday 31 October 2014 10:22
- Target OS: NAS (Synology & others)
- Domoticz version: Beta
- Location: Hoorn, The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Not the solution for me. I'm not using 'ticks', so still the same problem.
Rob, I've sent you the Teamviewer credentials.....
Rob, I've sent you the Teamviewer credentials.....
RPi3b+/RFXCOM rfxtrx433E/Shelly/Xiaomi Gateway/Philips HUE Lights/Atag Zone One/2 SunnyBoy inverters/AirconWithMe/P1 smartmeter/Domoticz latest Beta
- EdwinK
- Posts: 1820
- Joined: Sunday 22 January 2017 21:46
- Target OS: Raspberry Pi / ODroid
- Domoticz version: BETA
- Location: Rhoon
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
sonar wrote:traffic map is working fine here.
It is important to not place the long, lat and zoomlevel between ticks ' in the config file.
var _MAPS_LATITUDE = 52.090737;
var _MAPS_LONGITUDE = 5.121420;
var _MAPS_ZOOMLEVEL = 11;
Works, thanks
Running latest BETA on a Pi-3 | Toon® Thermostat (rooted) | Hue | Tuya | IKEA tradfri | Dashticz V3 on Lenovo Huawei Tablet | Conbee
-
- Posts: 26
- Joined: Saturday 15 April 2017 12:28
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Is it possible to set last update for specified blocks like:
Code: Select all
blocks[21]['lastupdate'] = true
- htilburgs
- Posts: 464
- Joined: Tuesday 03 November 2015 11:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
+1... Already been looking in the CSS, looks like has someting to do with position: but can't find the exact reason or solutionsonar wrote:After todays pull the up and down arrow of my blinds are positioned on top of eachother.
blinds.png
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
-
- Posts: 1273
- Joined: Saturday 24 January 2015 22:12
- Target OS: NAS (Synology & others)
- Domoticz version: 3.7067
- Location: NL
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Together with @mvveelen I did fix a little bug that caused the map wasnt loading for some people!
Download the latest version!
Download the latest version!
Last edited by robgeerts on Tuesday 25 April 2017 23:01, edited 1 time in total.
- mvveelen
- Posts: 678
- Joined: Friday 31 October 2014 10:22
- Target OS: NAS (Synology & others)
- Domoticz version: Beta
- Location: Hoorn, The Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Thanks Rob, much appreciated !
RPi3b+/RFXCOM rfxtrx433E/Shelly/Xiaomi Gateway/Philips HUE Lights/Atag Zone One/2 SunnyBoy inverters/AirconWithMe/P1 smartmeter/Domoticz latest Beta
-
- Posts: 1273
- Joined: Saturday 24 January 2015 22:12
- Target OS: NAS (Synology & others)
- Domoticz version: 3.7067
- Location: NL
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Its because the <li>-tags have position absolute and zindex 9999 (needed because otherwise a small part of the top button wasnt clickable because of the rotated stop button...) But, at my tablet, it shows the buttons correctly.... could it be cache problem?htilburgs wrote:+1... Already been looking in the CSS, looks like has someting to do with position: but can't find the exact reason or solutionsonar wrote:After todays pull the up and down arrow of my blinds are positioned on top of eachother.
blinds.png
- htilburgs
- Posts: 464
- Joined: Tuesday 03 November 2015 11:01
- Target OS: Raspberry Pi / ODroid
- Domoticz version: Beta
- Location: Netherlands
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Nope, no chache....
Can it be, it's missing class .btn.btn-number.min in css?
Can it be, it's missing class .btn.btn-number.min in css?
Hardware:
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
RPi3 - Aeon Labs Z-Stick GEN5 - Fibaro Dimmer 2 - Fibaro Roller Shutter 2 - Fibaro Smoke Sensor - Yeelight RGBW Led bulb - Yeelight Smart LED Light Strip - Neo Coolcam PIR Motion Sensor - Neo Coolcam PowerPlug - Nest Thermostat v3
-
- Posts: 18
- Joined: Saturday 31 January 2015 11:19
- Target OS: Raspberry Pi / ODroid
- Domoticz version: 3.8153
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
No, I don't think so. Same problem in Edge, Firefox, Incognito mode, etc.robgeerts wrote:Could it be cache problem?
-
- Posts: 1273
- Joined: Saturday 24 January 2015 22:12
- Target OS: NAS (Synology & others)
- Domoticz version: 3.7067
- Location: NL
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
It turned out the trafficmap was also not working on a second screen.... just pushed a fix for this...now going to bed
- HansieNL
- Posts: 957
- Joined: Monday 28 September 2015 15:13
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Contact:
Re: Dashticz v2.0, custom positioning and multiple screens
Working on 2nd screen here.robgeerts wrote:It turned out the trafficmap was also not working on a second screen.... just pushed a fix for this...now going to bed
Blah blah blah
Who is online
Users browsing this forum: Google [Bot] and 1 guest