Dashticz - General Discussions

[robgeerts]

While I'm at it. My smoke detector also says "smoke detected" while the status is normal.

Whats the output of your smoke device?

"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "Normal",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 1,
"HardwareName" : "RepoRFXCom",
"HardwareType" : "RFXCOM - RFXtrx433 USB 433.92MHz Transceiver",
"HardwareTypeVal" : 1,
"HaveDimmer" : false,
"HaveGroupCmd" : false,
"HaveTimeout" : false,
"ID" : "15E400",
"LastUpdate" : "2016-12-25 10:09:12",
"MaxDimLevel" : 0,
"Name" : "smoke detector",
"Notifications" : "true",
"PlanID" : "6",
"PlanIDs" : [ 6 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : 7,
"Status" : "Normal",
"StrParam1" : "aHR0cDovLzE5Mi4xNjguOTAuMTAvdHJpZ2dlci5waHA/dHJpZ2dlcj1zbW9rZV9hbGFybV9vbg==",
"StrParam2" : "aHR0cDovLzE5Mi4xNjguOTAuMTAvdHJpZ2dlci5waHA/dHJpZ2dlcj1zbW9rZV9hbGFybV9vZmY=",
"SubType" : "KD101 smoke detector",
"SwitchType" : "Smoke Detector",
"SwitchTypeVal" : 5,
"Timers" : "false",
"Type" : "Security",
"TypeImg" : "smoke",
"Unit" : 0,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "18"

Please test latest version

[Dropshot]

Just a few minor things I noticed and can possibly be updated in a future release:

1. Is it possible to remove the time and date of the traffic announcement?


2. When I press on the buienradar block, I get to the weather forecast (weer.nl) of some random cities in NL (e.g. 'Son' or 'Banne Buiksloot' ), instead of the rain forecast (buienradar.nl) of my city.

3. maybe it is more logical to link the weather forecast (weer.nl) to the weather blocks?

4. The newsfeed scrolls trough the news items (which I really like!), but for me this scroll speed is just a bit too fast, I cant read everything before it scrolls again. Maybe it can scroll a bit less often?

For me these changes have no priority whatsoever, I really love what you're doing, that's why I'm noticing all these things.

[gjaa]

Wauw Rob,

This is amazing, what a lot of work in an week (I was here a week ago)
Even a wiki page
I will buy you a beer

I did a clean install via github, a lot easier then upload
I can see al my favourites

Thumbs up

Gerard

[repoman]

Whats the output of your smoke device?

"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "Normal",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 1,
"HardwareName" : "RepoRFXCom",
"HardwareType" : "RFXCOM - RFXtrx433 USB 433.92MHz Transceiver",
"HardwareTypeVal" : 1,
"HaveDimmer" : false,
"HaveGroupCmd" : false,
"HaveTimeout" : false,
"ID" : "15E400",
"LastUpdate" : "2016-12-25 10:09:12",
"MaxDimLevel" : 0,
"Name" : "smoke detector",
"Notifications" : "true",
"PlanID" : "6",
"PlanIDs" : [ 6 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : 7,
"Status" : "Normal",
"StrParam1" : "aHR0cDovLzE5Mi4xNjguOTAuMTAvdHJpZ2dlci5waHA/dHJpZ2dlcj1zbW9rZV9hbGFybV9vbg==",
"StrParam2" : "aHR0cDovLzE5Mi4xNjguOTAuMTAvdHJpZ2dlci5waHA/dHJpZ2dlcj1zbW9rZV9hbGFybV9vZmY=",
"SubType" : "KD101 smoke detector",
"SwitchType" : "Smoke Detector",
"SwitchTypeVal" : 5,
"Timers" : "false",
"Type" : "Security",
"TypeImg" : "smoke",
"Unit" : 0,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "18"

Please test latest version

Ok, downloaded latest, placed it in new folder dasboard4, copied my earlier posted settings.js again and now it's working...

The smoke detector isn't red anymore and doesn't say "rook gedetecteerd" It just says "AAN" while status is normal.

[gjaa]

I find a typo

Schermafbeelding 2017-04-15 om 16.28.10.png (55.67 KiB) Viewed 1789 times

"Energie vandaag" is on the place of the kWh

Gerard

[Blueone]

Thanks Blueone!
But, did it work for your raspberry pi??

Yes, my screen does go to a lower brightness know when it enters stand-by! and also comes up again. Btw, I also changed the stand-by time to seconds instead of minutes .

I only notice that it hangs sometimes so probably I did something wrong in de main.js, I have to check that.

Stand-by to do:
Create a css which is only showing the time big, termperature big and the weather so I can see those things from a distance when is is in stand-by. Going on a holiday but after that I'm going to create something like this.

And I have to optimze the css further for the raspberry touchscreen.

A bit like this in stand-by and the full experience in active mode:
toonstandby.jpg

Attached a short video
https://vimeo.com/213339928

Oke I changed the stand-by part a little bit again, this seems to be better, it resets the standby timer by mouse momevent zo it doesn't try to enter the stand-by modus when it is active.

Code: Select all

//STANDBY FUNCTION
if(parseFloat(_STANDBY_AFTER_MINUTES)>0){
	setInterval(function(){
		standbyTime+=1000;
	},1000);

	setInterval(function(){
		if(standbyActive!=true){
		//	if(standbyTime>=((_STANDBY_AFTER_MINUTES*1000)*60)){
			if(standbyTime>=(_STANDBY_AFTER_MINUTES*1000)){
				$('body').addClass('standby');
				if(typeof(_STANDBY_CALL_URL)!=='undefined' && _STANDBY_CALL_URL!==''){
					$.get(_STANDBY_CALL_URL);
					standbyActive=true;
				}
			}
		}
	},5000);

	$('body').bind('mousemove', function(e){
		standbyTime=0;
		disableStandby();
	});

	$('body').bind('click', function(e){
		standbyTime=0;
		disableStandby();
	});

	function disableStandby(){
		if(standbyActive==true){
			standbyTime=0;
			$('body').removeClass('standby');
			if(typeof(_END_STANDBY_CALL_URL)!=='undefined' && _END_STANDBY_CALL_URL!==''){
					$.get(_END_STANDBY_CALL_URL);
			}
			standbyActive=false;
		}
		
	}
}
//END OF STANDBY FUNCTION

[Ierlandfan]

Can I place the content of some local txtfile into a block?

[bimse]

How do I integrate Security Panel, so it appears with the keyboard.
It appears only with On / Off function, but it does not work.

[Clemen]

How do I integrate Security Panel, so it appears with the keyboard.
It appears only with On / Off function, but it does not work.

Just make a link block to sec panel

buttons.alarm = {image: 'img/radio_on.png', title: 'Alarm', url: 'http://192.168.1.4:8080/secpanel/index.html'}

And put it in a block:
columns[1]['blocks'] = [buttons.alarm]

[DvD]

Really great work !!

Quick questions:

1. Is it possible to change the icon of a Scene ? Like with Blocks
2. Is it possible to leave a space between 2 switches ? example: switch1 - empty - switch 2

thnx!

[bimse]

thanks for your quick response Clemen,it works.

[repoman]

"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "Normal",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 1,
"HardwareName" : "RepoRFXCom",
"HardwareType" : "RFXCOM - RFXtrx433 USB 433.92MHz Transceiver",
"HardwareTypeVal" : 1,
"HaveDimmer" : false,
"HaveGroupCmd" : false,
"HaveTimeout" : false,
"ID" : "15E400",
"LastUpdate" : "2016-12-25 10:09:12",
"MaxDimLevel" : 0,
"Name" : "smoke detector",
"Notifications" : "true",
"PlanID" : "6",
"PlanIDs" : [ 6 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : 7,
"Status" : "Normal",
"StrParam1" : "aHR0cDovLzE5Mi4xNjguOTAuMTAvdHJpZ2dlci5waHA/dHJpZ2dlcj1zbW9rZV9hbGFybV9vbg==",
"StrParam2" : "aHR0cDovLzE5Mi4xNjguOTAuMTAvdHJpZ2dlci5waHA/dHJpZ2dlcj1zbW9rZV9hbGFybV9vZmY=",
"SubType" : "KD101 smoke detector",
"SwitchType" : "Smoke Detector",
"SwitchTypeVal" : 5,
"Timers" : "false",
"Type" : "Security",
"TypeImg" : "smoke",
"Unit" : 0,
"Used" : 1,
"XOffset" : "0",
"YOffset" : "0",
"idx" : "18"

Please test latest version

Ok, downloaded latest, placed it in new folder dasboard4, copied my earlier posted settings.js again and now it's working...

The smoke detector isn't red anymore and doesn't say "rook gedetecteerd" It just says "AAN" while status is normal.

Uhm, sorry to bother you again but I noticed something else changed in the last few days (off course a lot has changed

A few days ago the MD cam1 enz switches (see earlier screenshot) had the same icon.
Now some of them are light bulbs and others are switches. They are all "SwitchType" : "On/Off"
What setting in domoticz do I have to change so those switches use the same icon?

[robgeerts]

1. Is it possible to remove the time and date of the traffic announcement?

Fixed in latest version

2. When I press on the buienradar block, I get to the weather forecast (weer.nl) of some random cities in NL (e.g. 'Son' or 'Banne Buiksloot' ), instead of the rain forecast (buienradar.nl) of my city.

You can change this link in config.js

I will buy you a beer

Thanks!

The smoke detector isn't red anymore and doesn't say "rook gedetecteerd" It just says "AAN" while status is normal.

Fixed in latest version!

I find a typo
Schermafbeelding 2017-04-15 om 16.28.10.png
"Energie vandaag" is on the place of the kWh

Fixed in latest version!

Oke I changed the stand-by part a little bit again, this seems to be better, it resets the standby timer by mouse momevent zo it doesn't try to enter the stand-by modus when it is active.

Added to latest version!

1. Is it possible to change the icon of a Scene ? Like with Blocks

Use:

Code: Select all

blocks['s3'] = {}
blocks['s3']['icon'] = 'fa-fire';

2. Is it possible to leave a space between 2 switches ? example: switch1 - empty - switch 2

Sorry, no

[robgeerts]

standby

For some reason, it didn't go back to normal with me, in latest version it does.
Although, I reverted back to minutes... because the name of the variable says 'minutes'.
If you want half a minute, use 0.5

[EdwinK]

Can you do something with this?

Code: Select all

{
   "ActTime" : 1492273407,
   "ServerTime" : "2017-04-15 18:23:27",
   "Sunrise" : "06:46",
   "Sunset" : "20:38",
   "result" : [
      {
         "AddjMulti" : 1.0,
         "AddjMulti2" : 1.0,
         "AddjValue" : 0.0,
         "AddjValue2" : 0.0,
         "BatteryLevel" : 255,
         "CustomImage" : 0,
         "Data" : "Off",
         "Description" : "",
         "Favorite" : 1,
         "HardwareID" : 20,
         "HardwareName" : "Hue Scenes",
         "HardwareType" : "Dummy (Does nothing, use for virtual switches only)",
         "HardwareTypeVal" : 15,
         "HaveDimmer" : true,
         "HaveGroupCmd" : true,
         "HaveTimeout" : false,
         "ID" : "000140AB",
         "Image" : "Light",
         "IsSubDevice" : false,
         "LastUpdate" : "2017-04-15 09:53:48",
         "Level" : 0,
         "LevelActions" : "http%3A//192.168.0.10%3A8084/json.htm%3Ftype%3Dcommand%26param%3Dswitchlight%26idx%3D86%26switchcmd%3DOff|http%3A//192.168.0.10%3A8084/json.htm%3Ftype%3Dcommand%26param%3Dswitchlight%26idx%3D71%26switchcmd%3DOn|http%3A//192.168.0.10%3A8084/json.htm%3Ftype%3Dcommand%26param%3Dswitchlight%26idx%3D72%26switchcmd%3DOn|http%3A//192.168.0.10%3A8084/json.htm%3Ftype%3Dcommand%26param%3Dswitchlight%26idx%3D74%26switchcmd%3DOn|http%3A//192.168.0.10%3A8084/json.htm%3Ftype%3Dcommand%26param%3Dswitchlight%26idx%3D88%26switchcmd%3DOn",
         "LevelInt" : 0,
         "LevelNames" : "Off|Concentreren|Gedimd|Lezen|Film",
         "LevelOffHidden" : false,
         "MaxDimLevel" : 100,
         "Name" : "Hue Scenes",
         "Notifications" : "false",
         "PlanID" : "0",
         "PlanIDs" : [ 0 ],
         "Protected" : false,
         "SelectorStyle" : 0,
         "ShowNotifications" : true,
         "SignalLevel" : "-",
         "Status" : "Off",
         "StrParam1" : "",
         "StrParam2" : "",
         "SubType" : "Selector Switch",
         "SwitchType" : "Selector",
         "SwitchTypeVal" : 18,
         "Timers" : "false",
         "Type" : "Light/Switch",
         "TypeImg" : "Light",
         "Unit" : 1,
         "Used" : 1,
         "UsedByCamera" : false,
         "XOffset" : "0",
         "YOffset" : "0",
         "idx" : "91"
      }
   ],
   "status" : "OK",
   "title" : "Devices"
}

No need to rush, enjoy your Easter-weekend.

[Blueone]

standby

For some reason, it didn't go back to normal with me, in latest version it does.
Although, I reverted back to minutes... because the name of the variable says 'minutes'.
If you want half a minute, use 0.5

, didn't thought about that. Maybe a small error in de code which I forget to edit in my post. Glad is has being fixed. Btw, are you also using the touchscreen?
I thought there were some other issues because my dashboard hung. But I also added 2 graphs on a second pages and those caused the dashboard to stall. I think because I have setup domoticz it updates graphs every minute instead of 5 minutes which is to much to handle for the dashboard.

I also want to create an other stand-by few with a big clock etc, I can image that this is more a personal choice so I wan't to add it in the custom css. I'm a bit of newby is css en js world. Can I do something like this in the css to overide something when the standby class is available? Can someone help me in the right directon for so I can create it? Thanks!

Code: Select all

.standby .mh {
	display: none !important;
}

[gjaa]

My doorcontact's state never change, it's always open

Schermafbeelding 2017-04-15 om 19.19.26.png (19.11 KiB) Viewed 1740 times

Here is the setting
{
"AddjMulti" : 1.0,
"AddjMulti2" : 1.0,
"AddjValue" : 0.0,
"AddjValue2" : 0.0,
"BatteryLevel" : 255,
"CustomImage" : 0,
"Data" : "Closed",
"Description" : "",
"Favorite" : 1,
"HardwareID" : 2,
"HardwareName" : "RFXCOM -RFXtrx433e Tranceiver",
"HardwareType" : "RFXCOM - RFXtrx433 USB 433.92MHz Transceiver",
"HardwareTypeVal" : 1,
"HaveDimmer" : true,
"HaveGroupCmd" : true,
"HaveTimeout" : false,
"ID" : "123E106",
"Image" : "Light",
"InternalState" : "Closed",
"IsSubDevice" : false,
"LastUpdate" : "2017-04-15 19:15:02",
"Level" : 0,
"LevelInt" : 0,
"MaxDimLevel" : 15,
"Name" : "State - Contact Achterdeur",
"Notifications" : "false",
"PlanID" : "2",
"PlanIDs" : [ 2 ],
"Protected" : false,
"ShowNotifications" : true,
"SignalLevel" : 6,
"Status" : "Closed",
"StrParam1" : "",
"StrParam2" : "",
"SubType" : "AC",
"SwitchType" : "Door Lock",
"SwitchTypeVal" : 11,
"Timers" : "false",
"Type" : "Lighting 2",
"TypeImg" : "door",
"Unit" : 10,
"Used" : 1,
"UsedByCamera" : false,
"XOffset" : "531",
"YOffset" : "498",
"idx" : "193"
},

Thanks
Gerard

[EdwinK]

Thanks Rob, for your quick service

[robgeerts]

My doorcontact's state never change, it's always open

Fixed in latest version!

I also want to create an other stand-by few with a big clock etc, I can image that this is more a personal choice so I wan't to add it in the custom css. I'm a bit of newby is css en js world. Can I do something like this in the css to overide something when the standby class is available? s

What about defining different columns/blocks for standby-mode?
Something like:



If people are interested in this, let me know, I will look into this!

[Clemen]

My doorcontact's state never change, it's always open

Fixed in latest version!

I also want to create an other stand-by few with a big clock etc, I can image that this is more a personal choice so I wan't to add it in the custom css. I'm a bit of newby is css en js world. Can I do something like this in the css to overide something when the standby class is available? s

What about defining different columns/blocks for standby-mode?
Something like:



If people are interested in this, let me know, I will look into this!

would be perfect!