Xiaomi Smart Home Suite (very cheap) compatibilty?

[deennoo]

Xiaomi Mi Robot Vacuum - Is that possible? )

it's possible!

Снимок экрана 2017-01-08 в 21.06.53.png

Great ! via the gateway or something else ?

[jjnj]

Update to a beta version? Domoticz or my Gateway?
My domoticz version is 3.6288
My gateway version is 1.4.1_142.0141

Are you installing Domoticz on Windows 10 64bit? If that is the case, you won't see any devices... don't know why. Others have the same problem.

I'm using windows 10 64-bit and I can see everything

[ben53252642]

Well I've ordered the Xiaomi Air Purifier 2nd gen with Wifi (which I'll figure out how to integrate into Domoticz) and another 6x motion sensors (making 12 in total now). The Xiaomi motion sensors use the CR2450 coin cell batteries, which only have about 550 - 630 mah capacity which is fascinating considering the Fibaro Gen5 Door/Window sensor has a 1200mah capacity battery and my TKB 4 in 1 motion / door sensors use a 1500mah capacity 123 battery. The Aeotec 2nd gen door / window sensors use a couple of AAA batteries which are usually about 1250mah each so 2500mah total.

Now Zigbee has lower power consumption compared to Z-Wave and considering the Xiaomi motion sensor only does motion...

Has anyone sent the batteries in a Xiaomi motion sensor flat yet? How long did it last?

The good thing about CR2450 is the batteries can be bought for around $0.45 AUD each.

https://www.aliexpress.com/wholesale?ca ... ext=CR2450

Corbin I'd say your guess that they only transit a battery level below a certain threshold is extremely likely, they would be doing everything possible to conserve energy.

Actually I'm going to test it with one of the sensors when I get it by deliberately running down the cell with a 3v motor then putting it in the sensor and seeing what happens.

[woody4165]

Left to get compatibel :
- Magic Cube : playing with this remote is fun !
...

Hi deennoo

Is there any chance to get the Magic Cube work with domoticz?
I've just bought one (waiting for delivery) since the price was very low, and I was wondering to use it with domoticz.

Thanks

[Sevift]

Xiaomi Mi Robot Vacuum - Is that possible? )

it's possible!

Снимок экрана 2017-01-08 в 21.06.53.png

Great ! via the gateway or something else ?

Via python script

[jjnj]

Well I've ordered the Xiaomi Air Purifier 2nd gen with Wifi (which I'll figure out how to integrate into Domoticz) and another 6x motion sensors (making 12 in total now). The Xiaomi motion sensors use the CR2450 coin cell batteries, which only have about 550 - 630 mah capacity which is fascinating considering the Fibaro Gen5 Door/Window sensor has a 1200mah capacity battery and my TKB 4 in 1 motion / door sensors use a 1500mah capacity 123 battery. The Aeotec 2nd gen door / window sensors use a couple of AAA batteries which are usually about 1250mah each so 2500mah total.

Now Zigbee has lower power consumption compared to Z-Wave and considering the Xiaomi motion sensor only does motion...

Has anyone sent the batteries in a Xiaomi motion sensor flat yet? How long did it last?

The good thing about CR2450 is the batteries can be bought for around $0.45 AUD each.

https://www.aliexpress.com/wholesale?ca ... ext=CR2450

Corbin I'd say your guess that they only transit a battery level below a certain threshold is extremely likely, they would be doing everything possible to conserve energy.

Actually I'm going to test it with one of the sensors when I get it by deliberately running down the cell with a 3v motor then putting it in the sensor and seeing what happens.

If you get the purifier working on Domoticz i would definitely order one

[deennoo]

it's possible!

Снимок экрана 2017-01-08 в 21.06.53.png

Great ! via the gateway or something else ?

Via python script

Ok ! Can you share it please ?

[deennoo]

Left to get compatibel :
- Magic Cube : playing with this remote is fun !
...

Hi deennoo

Is there any chance to get the Magic Cube work with domoticz?
I've just bought one (waiting for delivery) since the price was very low, and I was wondering to use it with domoticz.

Thanks

All is done on domoticz side, you/we have to wait for a gateway fw update, as already says previously.

[Sevift]

Great ! via the gateway or something else ?

Via python script

Ok ! Can you share it please ?

I used vereschark to intercept packets.
I do not know whether they will suit you.
Probably everyone has their own packages.

Code: Select all

#!/usr/bin/python

import socket
import sys
import codecs

UDP_IP = '192.168.100.18'
UDP_PORT = 54321
INET_ADDR = (UDP_IP,UDP_PORT)

action = str(sys.argv[1])
massage = "213100500000000002f2c97b5872"

if action == "start":
	message_to_send = massage + "2fd096c280746dc2091bad1d30c49ce74da6c88492a5c0e7c427ad0b4ca98c3b08ea35e67b29dddd8624dd1f2ea46ced68fce3c5b7fef8e89eef60b3c777f43a5622"

if action == "pause":
	message_to_send = massage + "3080fdc4d67fe6fd048b63eb6d2cee5f285f8fec54c2e3bc5486641ec620bae160e9717af4d17ce3c0265bcb807644dae475bcaaf089391f6f76fa85b31396af3e26"

if action == "home":
	message_to_send = massage + "30e4006525a8e0420c337fbc2bfc1741369bb9760685aafe250790ee4ea8bda3aafbdfaa47ae0e8518503530fb72579fe8cf334c6a6fcd4cbc94bfb310f64163a80a"

if action == "find":
	message_to_send = massage + "29d24b61f9c826221c4c7a68be606ff324f81fcc282e18fa679d0506e3e805cbfe56323f2dc292f5d609d20782cb6df1abe3b4a9ce062da42e3371126048c2213b3e"

message_to_send = codecs.decode(message_to_send, "hex_codec")
sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
sock.sendto(message_to_send, INET_ADDR)

Снимок экрана 2017-01-09 в 13.34.57.png (50.13 KiB) Viewed 11231 times

[deennoo]

Via python script

Ok ! Can you share it please ?

I used vereschark to intercept packets.
I do not know whether they will suit you.
Probably everyone has their own packages.

Thanks, isn't really for me, but if some one get the robot and can try your script and works, that a good tricks

[n1c0l45]

Via python script

Ok ! Can you share it please ?

I used vereschark to intercept packets.
I do not know whether they will suit you.
Probably everyone has their own packages.

Code: Select all

#!/usr/bin/python

import socket
XXXX
XXXX
XXXX
sock.sendto(message_to_send, INET_ADDR)

Снимок экрана 2017-01-09 в 13.34.57.png

I should receve my mi robot soon, could you give me some informations to catch packets with wireshark? So that I could check if command are te same?

thanks

[jjnj]

All my compliments to you guys. I installed everything and it works really really well!
Thanks for your hard work.

[Sevift]

I should receve my mi robot soon, could you give me some informations to catch packets with wireshark? So that I could check if command are te same?

thanks

For example, a vacuum cleaner Search
Install BlueStacks on PC (Mac)
Install MiHome app on BlueStacks and connect Mi Robot

Снимок экрана 2017-01-10 в 18.46.24.png (147.14 KiB) Viewed 11082 times

On MiHome see ip adress Mi Robot

Run vereschark and select interface network PC

Снимок экрана 2017-01-10 в 18.45.58.png (164.07 KiB) Viewed 11082 times

Run intercept packets

Снимок экрана 2017-01-10 в 18.47.00.png (185 KiB) Viewed 11082 times

[Sevift]

Click on MiHome search devices
and stop on vereschark intercept packets
search packets ip PC to ip Mi Robot

Снимок экрана 2017-01-10 в 18.49.44.png (316.97 KiB) Viewed 11077 times

Copy data

555.png (338.28 KiB) Viewed 11079 times

Run PacketSender
Paste ip, port, protocol, data

Снимок экрана 2017-01-10 в 18.54.36.png (117.67 KiB) Viewed 11079 times

And send

If the robot will respond - excellent!
The required package is found

analogously other commands

[jumping]

Hi,
when do you think the Xiaomi Home will be available in Domoticz stable version?
thanks for great job!

[deennoo]

Hi,
when do you think the Xiaomi Home will be available in Domoticz stable version?
thanks for great job!

When Domoticz dev will decide to publish a new stable version.

[pavelbor]

New firmware is available for Gateway 1.4.1_143.0141
Does someone has updated Gateway yet ? Developer mode still exist?

[arkoko]

Yes.

[pavelbor]

Yes.

Is there are any improvements ? Battery level from sensors? Does log file shows something new?

[n1c0l45]

Thanks for your help!!

Great !!

I should receve my mi robot soon, could you give me some informations to catch packets with wireshark? So that I could check if command are te same?

thanks

For example, a vacuum cleaner Search
Install BlueStacks on PC (Mac)
Install MiHome app on BlueStacks and connect Mi Robot
Снимок экрана 2017-01-10 в 18.46.24.png
On MiHome see ip adress Mi Robot

Run vereschark and select interface network PC
Снимок экрана 2017-01-10 в 18.45.58.png

Run intercept packets
Снимок экрана 2017-01-10 в 18.47.00.png