Cheap chinese z-wave products

[geezerrr]

Does this mean that you’r not able to change “Ambient Illumination Lux Level Report” parameter 9 from
http://www.pepper1.net/zwavedb/device/894 as well?

[deennoo]

I can change it, but it doesn't send anything to my system

[JohnBoy32]

Does this mean that you’r not able to change “Ambient Illumination Lux Level Report” parameter 9 from
http://www.pepper1.net/zwavedb/device/894 as well?

I guess that because the sensor is long time in sleeping modus, you will have to wait (untill the sensor is awake) before your update of values is operational in the sensor. Update now and wait and see later (eg tomorrow) that your change has become effective.
Or use the trick mentioned above.

[domcao]

Welcome in the happy Neo buyers club...

There are many happy buyers; over 90 people (and the numbers are rising) and I do not see complaints @
https://www.aliexpress.com/item/NEO-COO ... 49261.html

Не отправленные с моего BlackBerry через Tapatalk

[lost]

just get a wall plug and a pir, no probleme to add them with domoticz last stable + gen5 w090

Can you try to change the report state (lux) to anytime else then the default 100?

Because I'm unable to change it.
Thnx in advance

On my side, this is the parameter 6, re-trigger interval, that cannot be changed.
It's at 8s, wanting to set it at 30s or a minute, with param 2 (on/off duration) set to 120s (this setup worked, as well as sentivity change, param 1).

I already included latest config patches (there is a quite recent one that's not in current domoticz stable)

The module finally works, but looks quite problematic on the inclusion side as well as for configuration.

[marigo]

Today I received the Neo coolcam wall plug. Including was easy in domoticz. Just set domoticz to learn mode en insert de wall plug.
The plug wil be automaticlly added and will show in the hardware list.

What I noticed is that I need to use a F, CEE 7/4 Schuko plug to switch a device. I first used a flat "euro" plug and it seems that the two pins are sometimes to small te make a good connection with the inside of the Neo Coolcam wall plug. So be aware.

[u01pei]

Price drop for the plug:
http://s.aliexpress.com/ZFnEJvyI

[mschut]

so, now one of my power plugs are dead Stopped responding, no reaction when i push the green button. Nothing.... quailty haha

Have you really tried it? You have to push three times quickly. If you hear any clicking noise then it's working. Maybe you should try it with another socket, etc.

Hmmm, two questions about the wall plug. Have a few now and are working great.

However:
-) Two new plugs did not survive being connected to my fridge plug. Was grounded, so don't really know what the problem is. But, cannot find a fuse. There isn't one is there...

-) The plugs do result in a few devices, sometimes a kwh meter, besides Watt. But this one is so not stable. Any idea how I can improve this device?


Verstuurd vanaf mijn SM-G920F met Tapatalk

[zalsson]

The one that broke for me is the only one that was used with ground pin connected

Skickat från min A0001 via Tapatalk

[Justintime]

The wait is for in wall switches... I have two doorsensors and a wall plug. I think price quality is very good.
Me happy buyer

[LouiS22]

My second door sensor was somewhat damaged (actually the reed tube was broken), but I fixed it and it's working. Only it has a loud clicking noise upon contacting/breaking with the magnet. It's somehat funny cause this sensor is placed onto the toilet door. No more sneaking quietly into the loo

[kurniawan77]

Received two wall plugs and they work wel! Even works with Eneco toon though without energy readings. In domoticz there is kWh but I get strange results...





Anyone knows why?

Sent from my Nexus 6P using Tapatalk

[sincze]

Welcome in the happy Neo buyers club...

There are many happy buyers; over 90 people (and the numbers are rising) and I do not see complaints @
https://www.aliexpress.com/item/NEO-COO ... 49261.html

Не отправленные с моего BlackBerry через Tapatalk

Great to read the NEO hardware experiences. The store owner is probably reading this forum as well and keeps increasing the price. Now at Fibaro pricing level of §55.
That is twice the 11-11 sales price so probably increasing his margin a bit.

Sent from my SM-G925F using Tapatalk

[kurniawan77]

Well I got mine from here €32,-

Home Automation Z wave Sensor Smart Home EU Power Plug Compatible with Z-wave 300 series and 500 series
http://s.aliexpress.com/fmY3AZbq
(from AliExpress Android)

Sent from my Nexus 6P using Tapatalk

[sincze]

Well I got mine from here €32,-

Home Automation Z wave Sensor Smart Home EU Power Plug Compatible with Z-wave 300 series and 500 series
http://s.aliexpress.com/fmY3AZbq
(from AliExpress Android)

Sent from my Nexus 6P using Tapatalk

Yes keep a look out for different sellers always a good idea

[trixwood]

Some of the sellers are different, with the same post address and they rotate the 'sale'

[sincze]

Some of the sellers are different, with the same post address and they rotate the 'sale'

Wow that I did not know. Good tip will look at that from now on. . Tnx.

Sent from my SM-G925F using Tapatalk

[Justintime]

Also buy with the Aliexpress app. It had special mobile only discounts.

But indeed prices gone up again. With Christmas I saw one for 26 euro wall plug.

[zalsson]

The price goes up and down like I normally do on aliexpress.

Skickat från min A0001 via Tapatalk

[nieass]

I have the AS-AB01Z siren as well, and studying on how to create the XML file... just not studying hard enough..
All info needed is here: http://products.z-wavealliance.org/products/1962

Only the Device ID is wrong, that should be
Neo CoolCam Battery Powered Siren/Doorbell: type=0003, id=1088

I am forced by my wife to stay the Christmas holidays with the family in a vacation park, so maybe I will give it a go when there.

I just created the xml file, I'll test it out and submit it to openzwave github

May I test your XML as well?

I'll post it tomorrow here

Verstuurd vanaf mijn SM-N9005 met Tapatalk