Hi, you still need the Domoticz python plugin for zigbee2mqtt: https://www.domoticz.com/forum/viewtopic.php?f=65&t=24975 Thank you! How stupid indeed.... I was only focused on the "MQTT Client Gateway with LAN interface" that I didn't see that one. Seemed a already passed station. Now it works!

Hey all, I feel i have tried it all.... So I hope you can help me... I have Zibgee2mqtt, MQTT and Domoticz running (all on the same Synology NAS), but no device gets populated into Domoticz :( I followed the instructions on: https://www.zigbee2mqtt.io/ and installed it as a Docker Zigbee2mqtt seems ...

Does anyone have any smart ideas? I am out of them

Yeah, I did that. Only added 50% of the devices, just to check/manage the process. but non of them gets 'pushed'. No errors no nothing... :?: Both Remote and server pick up devices on their own, but nothing is transferred. I also setup a new server on another RPi but no difference. Restarting the ...

Question... When everything is setup as described, and nothing is transfered (no errors either) What is then the next step? Can you 'force' anything? On the master: (192.168.2.222) 2020-11-26 22:19:59.052 Status: Domoticz Remote: connected to: 192.168.2.230:6144 In the Log of the remote/slave: (192 ...

Please help! python3 plugin.py config 1.1.1.1 code Traceback (most recent call last): File "plugin.py", line 177, in <module> create_ident(args.IP, args.KEY, CONFIGFILE) File "/volume1/@appstore/domoticz/var/plugins/IKEA-Tradfri/tradfricoap/coapcmd_api.py", line 81, in create_ident result = json ...

Hi Moroen, I just deleted the Plugins/IKEA-Tradfri directory and started over with the instructions. One thing that comes to my attention is that this command does not work. cd domoticz/plugins/ Instead i have to manually switch to: /usr/local/domoticz/var/plugins/ Could that have something to do ...

Hi Moroen, I just deleted the Plugins/IKEA-Tradfri directory and started over with the instructions. One thing that comes to my attention is that this command does not work. cd domoticz/plugins/ Instead i have to manually switch to: /usr/local/domoticz/var/plugins/ Could that have something to do ...

Please help! python3 plugin.py config 1.1.1.1 code Traceback (most recent call last): File "plugin.py", line 177, in <module> create_ident(args.IP, args.KEY, CONFIGFILE) File "/volume1/@appstore/domoticz/var/plugins/IKEA-Tradfri/tradfricoap/coapcmd_api.py", line 81, in create_ident result = json ...

Please help! python3 plugin.py config 1.1.1.1 code Traceback (most recent call last): File "plugin.py", line 177, in <module> create_ident(args.IP, args.KEY, CONFIGFILE) File "/volume1/@appstore/domoticz/var/plugins/IKEA-Tradfri/tradfricoap/coapcmd_api.py", line 81, in create_ident result = json ...

HI Moroen, Thanks for the swift reply. 1. but then you need a working IDENT/KEY pair: I have all the data, IP and key were left out intentionally :) So if, IP and the identity key (bottom of hub) are enough I have those. 2. Are you able to run the coapcmd command manually? You might be right that ...

It might be possible, but then you need a working IDENT/KEY pair. I'm not an expert on synology, but from the error-messages, it appears that the plugin fails when trying to execute coapcmd, so that's before it tries to write to the config file. Are you able to run the coapcmd command manually ...

Hi Flexx/Moroen, I have the same issue. I was wondering where the command tries to write the config file as permissions issue seems related to that. Flexx mentioned he chmod some directories?? Below my output. Similar config. Synology NAS and had to use coapcmd as the only viable option ...

i'm struggeling to install the plugin onto my Synology 414 nas. I believe I followed all steps correctly (after trying several times) but now i'm stuck at step 4, configuring the trafri coap. The command sudo python3 plugin.py config 192.168.x.y ************** generates the following output ...

i'm struggeling to install the plugin onto my Synology 414 nas. I believe I followed all steps correctly (after trying several times) but now i'm stuck at step 4, configuring the trafri coap. The command sudo python3 plugin.py config 192.168.x.y ************** generates the following output ...

On who's door do we have to knock to get support for these Horstmann Z-wave devices?

In my case the uninstall after a reboot followed by a reinstallation of the domoticz package solved the problem as mentioned indeed Unfortunately this didn't work for me... I am backing up all my data so I can do a factory reset of the Synology. (I already did a 'reinstall' of the OS, but that's ...

I will not make that mistake again on a development system ;-) That is a good idea on a beta system :) So the solution on the /usr/local/domoticz/bin/domoticz: /lib/libstdc++.so.6: no version information available problem is maybe to reinstall domoticz on DSM6.0 Beta? In my case the uninstall after ...

jumbotroll wrote:

AxelvanH wrote:
Yes, the file is present:
admin@Diskstation:/usr/lib$ ls libstdc*.* -l
-r-xr-xr-x 1 root root 866848 Jan 17 20:00 libstdc++.so.6

Why not try to copy this file to /domoticz/lib folder and chmod 755

Did it! no change on behaviour.

DSM 6.0 Beta. I have compiled some few test version with DSM 6.0-7274 Beta toolchain. This is not tested!! domoticz_x86-6.0_2.0.4372-7.spk domoticz_avoton-6.0_2.0.4372-7.spk domoticz_armadaxp-6.0_2.0.4372-7.spk domoticz_armada38x-6.0_2.0.4384-7.spk domoticz_bromolow-6.0_2.0.4386-7.spk http://www ...