Just got my brand new Nobo-OTGW up and running, guest what, FW 5.0... Domotics did add four devices and that's it :( Devices added: GPIOAPulledToGround GPIOBPulledToGround GPIOAStatusIsHigh GPIOBStatusIsHigh The output of PS=1 is logged by Domoticz and has 34 values: 2021-01-30 17:53:04.531 Status ...

I haven't got my OTGW up and running yet, just wanted to give you a heads up. The latest firmware for the OTWG, 5.0 dd 18 Jan 2021, has changed the output of the PS=1 command. Changelog : Version 5.0, released 18 January 2021 Potential incompatibility: The PS=1 output has changed. If using this ...

I haven't tried that myself as I don't have the need. But please let us know it it works
It should work I think and if 't doesn't you can always change the setting back to what it was.

Don't think you need to run Beta to add a virtual sensor, not sure if that restriction exists for the Pi.
Try the forum search and the wiki. All the info is there.
http://www.domoticz.com/wiki/Hardware_S ... y_Hardware
Once you have done that you can create Virtual sensors.

Mmm, cut and pasted it into a script, didn't give any errors for me.
Could it be there's some 'hidden' low ASCII sign somewhere, not visible in your editor? Cleanup the spaces maybe?

Copy/past issue? Could you post the first 30 lines from your script?

They have a serial api . It's not exactly cheap, about €340,- extra for a motorized top/down screen and then you'll still need a remote and a hub. (serial works with hub). They use a proprietary protocol over 2.4Ghz for the old remotes. Could well be they use this for the new product too. Not sure i ...

Nice script! Will definitely use it to control our screens when I get the hardware in place (pending funding approval :) ). Regarding ogimet, is there a special reason why you subtract 1 hour from UTC? Is that because ogimet doesn't return any value after the hour until where 15 to 25 minutes in the ...

Thanks for you best wishes! I'm on my way back again, though it's taking longer than I had hope for...

Sorry guys that I didn't react to these posts earlier, burn out is a bitch...
Seems the config is included in the latest version off domoticz (r5052)!

Many thanks to sarakha63 for getting this done!!!

You're welcome.
Good to see you got it working! You can modify the buttons on the remote to send scene commands BTW, instead off on/off/dim. And you can add several switches to a scene (and call it a group ).

Great! You now can add the buttons you've made available to a switch or scene :) UI takes time to update, a 'Heal network' can help speeding this up. (need to press incl 3x to make it work as OZW requests all nodes their status...) Sorry for the misspelling of the log... Working on a completely ...

Currently I go to Domoticz > Hardware > Controller Setup, select Include and press the button 3 times to wake it up. Can that be done more easily? Not sure why you should do that at all. If you want Domoticz to see Button-1 on the remote, you should add node 1 (this is the Z-stick) to group 2 off ...

It's a bit tedious, but using the 'incl' button is the only way to get it to wake-up and receiver commands. When you enable debugging on the Zwave-stick it starts writing debug info into OZW_Log.txt (main domoticz folder). You can see if the remote wakes up when you tail the file: tail OZW_Log.txt ...

Not really. I've no device of that type in my device list...

Nope, not anymore. You don't seem to like my suggestions. Waste of time.

My understanding is that even if Domoticz has good data to use, it did not do as supposed. Are you sure? id=004a != id=0064... Is there a possibility to force Domoticz to use the right file to configure the MultisensorGen5? Upgrade? ;) You could try to pull the specific config files from OZW-git ...

That's probably the latest stable. If you want Domoticz support for your sensor you'll have to compile the latest beta your self/use the latest beta binary. It's described in the wiki.

You mentioned you have a Multisensor 6. In my manufacturer_specific.xml this show up: <Product type="0002" id="0064" name="MultiSensor 6" config="aeotec/multisensor6.xml" /> <Product type="0102" id="0064" name="MultiSensor 6" config="aeotec/multisensor6.xml" /> <Product type="0202" id="0064" name ...

Hadn't found the time/inspiration to continue working on the AB. For the most parts it works for us. (Plain On/Off and Scenes). All On/Off is still an issue (not al the devices react on it) but I bypassed that by using a Scene, as is dimming (zwave association, increments are to big). For now I just ...