I jave a similar setup with RPi 4 and Z-Stick 5.
You have to use an USB hub between RPi and Stick.

I use this one https://www.amazon.de/dp/B00L2442H0?ref ... b_ap_share

Thank You very much for Your comments.
I checked all of Your mentioned topics and it all was okay.
I enden up in deleting the Mosquitto DB and let Mosquitto re-create it.
At the moment everything looks good!

I still have the issue that teached devices do no longer work after restart of Domoticz. See https://www.domoticz.com/forum/viewtopic.php?p=312206#p312206 Error in Domoticz: Error: Shelly MQTT: Switch not found!? (shellyplus2pm-d48afc4447d4-roller-pos-c/Küche Rollo) But the device is in the Domoticz ...

Thank You! Got it

I have an issue with a Shelly Plus 2PM in roller shutter mode. I have switched the Shelly to roller shutter mode and installed the script according to: https://github.com/enesbcs/shellyteacher4domo/wiki/Shelly-2PM-Cover-Position I used V 0.7 of teacher and also re-discovered the 2PM. I can open and ...

To solve this issue "IF"-s are removed from current ShellyTeacher databases. You could simply download mqtt_templates.txt and mqtt_templates_gen2.txt from github or the latest ShellyTeacher 0.7 which contains the updated databases, and re-teach the problematic devices. Resolved! Thank You very much!

Here they are: Motion: { "name": "shellymotion2-842E14FFCE96 Motion", "stat_t": "~info", "enabled_by_default": true, "uniq_id": "shellymotion2-842E14FFCE96-motion", "qos": 0, "~": "shellies/shellymotion2-842E14FFCE96/", "val_tpl": "{%if value_json.sensor.motion==true%}ON{%else%}OFF{%endif%}", "exp ...

Shelly Motion has a "cooldown time" its default as 5 minute as i remember, and it wont send you motion again until its reached. Although tamper has to arrive instantly. You can try to remove the motion and tamper device from Domoticz and re-run the teacher to create them again. That's right. I have ...

I just ran into the next problem :cry: I have included a "Shelly Motion 2" with teacher. The following devices were created: 21-01-2024_13-05-41.jpg The problem is, that only Lux and Temp are updated when a motion or tamper is triggered. 2024-01-21 13:09:51.334 Shelly MQTT: Temp/THR128/138, THC138 ...

Thank You for Your answer. I tried restarting mosquitto servive, whicj is my MQTT broker and all messages come back immediately. So this does not seem to be the problem. I also have other Shelly devices for testing... for example, my 2PM works flawlessly after restarting Domoticz. Any other idea ...

I have also raised an issue a fee days ago, but did nit get an answer.

Do You know any othet iOS apps apart from Domoticz app, which has been updated about three Years ago…

Thank You for Your answer.

I tried restarting mosquitto servive, whicj is my MQTT broker and all messages come back immediately. So this does not seem to be the problem.
I also have other Shelly devices for testing... for example, my 2PM works flawlessly after restarting Domoticz.

Any other idea?

I am using Domoticz Version: 2024.2 (build 15864) with Shelly MQTT Autodiscovery plugin and shellyteacher. I have successfully added a Shelly TRV, can control it, and status updates via MQTT. I have now noticed, I have to re-run shellyteacher when I restart Domoticz, because Domoticz can no longer ...

I would be also interested

Why is OpenZwave about being removed?

viewtopic.php?t=39291 says:

As of this moment the usage is also deprecated and support for this will be dropped in a near beta version.

Please keep it in Domoticz!

Yes,I have seen this.
This means, going through 160 devices and replace one by one.
Not really desirable...

Hi, I have noticed, Openzwave support will be dropped in one of the next beta versions. Is there an easy way to migrate all Z-Wave devices to ZWave-JS-UI? At the moment, I have 100+ devices in OZW, which results in 160+ devices in Domoticz. The migration procedure of replacing 160+ devices manually ...

@kiddigital One step closer... I have added "analog_input": [ "count" ], "digital_input": [ "status" ], "temp": [ "temperature", "ambient_temperature", "temperatureBoard" ], It now reads the temperature, but not the state: Status: TTN: Converted decoded_payload to regular payload for processing! TTN ...

I have downloaded the ttnmqtt_aliases file from which contains { "temp": [ "temperature", "ambient_temperature" ], "humidity": [ "hum" ], "baro": [ "barometer" ], "batterylevel": [ "battery_level" ], "gps": [], "luminosity": [], "presense": [], "analog_input": [], "analog_output": [], "digital ...

I am playing around with Lorawan and TTN. For that, I have ordered a Browan TBDW100 Door/Windows Sensor. I have managed to include it to TTN and also have set up "The Things Network (MQTT/LPP)" in Domoticz. When I trigger an event from the sensor, I receive " Error: TTN: Invalid data received ...