I'm starting with Domoboard, but it seems not to support my blinds... is this correct.

i've tried;

Uitval = <id>, blinds
and
Uitval = <id>, blinds, Data

but nothing happens or shown on the dashboard.

Ant ideas's?

I have the same problem.
As far as i know, blinds are not supported (yet).
You ...

I've recently also the Landis + GYR 350 DSMR 5 installed.
The parameters are baudrate=115200 parity=None databits=8 stopbit=1
I've tested this with cu
The command: cu -l /dev/ttyUSB1 -s 115200 --parity=none
It should give the response "connected" and a telegram should appear.

I also found some ...

Hi Awst6000,

In the top-tiles, the status of my blinds are still shown.
I'm using the latest version of the master-build, not the developers build. (Domoboard "says" hurray! There is no update available for Domoboard).
Also i'm not using the word blinds behind the xid.
Maybe that's the difference ...

Hello,

I want to add the venetians blinds to domoboard.
Their type in domoticz = RFY, sybtype = RFY. (They are controlled by RFXCOME)
I have tried the selector switch as i understand that the selector switch can show several buttons for up, stop and down.
However, no buttons are shown.

Are ...

squandor,

Thanks for your help.
The percentage is indeed of an another idx.
Unfortunally i can not code, but if it needs to be tested i will be happy to do so.

Thanks again,
René

squandor,

I changed my config accoording to your advice, but no luck.
The icon is added to the tile and i see the text Status for a brief moment, but than i see the percentage again.
a part of my config looks like:

[[[Verlichting]]]
Woonkamer Verlichting = 118
Woonkamer verlichting group = 1 ...

Hello,

I have created a group in Domoticz which switch on or off all lights in the living room.
(The group exists of On/off switches and dimmers)
If one of the lights is on, Domoticz shows the term "mixed".
If all lights are off, Domoticz shows the term "Off"
And if all the lights are on, Domoticz ...

I also (re)added netatmo and it works nicely. Thanks.
The sign next to the rain gauge looks good, but i'll have to wait for the rain to see if it is working ;)

But i do have a question.
In the wiki ( http://www.domoticz.com/wiki/NetatmoWeatherStation ),
a screen is shown that you have to fill in ...

Multinet wrote:Last question : I was using TempHumBaro (for inside) and TempBaro (for outside) before. Is there a way to continu to use it ?

I'm not sure what you mean.
If you were using it with Netatmo before, i think that you can use it again.
But please explain your problem.

Hello Multinet,

Have you checked that CO is written in capitals?
Not only in your settings it needs to be written in capitals (which it already is), but also in the Netatmo script
A line (line 54 in my script) needs to be changed into
DATATYPE_CO2 = 'CO2'
Maybe it is written in lower-case ...

I have version 2.2534 installed and it is working again (except the rain sensor, but that did never work at all)

@ brakc
Maybe a stupid question, but did you allow Domoticz to add new devices?
(Settings -> settings -> system -> accept new hardware/sensors)

@multinet
I did have that problem when i ...

I just found a topic (Json call fail after update) which could be the problem we have if no values are recieved anymore in Domoticz
and if you are using https in stead of http.
http://www.domoticz.com/forum/viewtopic.php?f=6&t=6780&p=45060&hilit=update#p45060
Accoording to this topic, you now need ...

Hello,

I just updated Domoticz from version 2.2514 to version 2.2525. With version 2.2525, Domoticz does not receive any values.
Restart and so on does not help.
I restored a previous version (restore an image) and the Domoticz (version 2.2418) does recieve the information again.
So may something ...

Hallo,

I also had the problem that my sensors in Domoticz recieved no values.
Also no error was shown.

However, recently Netatmo only accepts https calls and does not support http anymore.
In the netatmo.py script, there are two records with http (line 20 and 21 in my script). I changed that to ...

Hello,

I've a problem with my rain sensor.
I've installed the python script accoording to the install procedure given by Box18 (thanks for that)
and i use the netatmo.py script provided by cyberbot with the noise and rain sensor lines added. (also thanks)
All sensors are added to Domoticz ...