I was feared that I have to reinstall all, thank you for your confirmation about this process.
I will install the 2023.2.15453 stable version, I read elsewhere that it has OZW embedded.
Bye

In the 2019 I made two security/domotic systems in two different houses running Domoticz v 4.10717 (2019-05-09) on Raspberry PI 3 with Raspbian v8 (Jessie) installed. The two installations have one ZWave controller, tenth of devices and sensors, some wired sensors are also connected through the ...

Anyone is using this D/W sensor?
Any experience about it?

Hi ben, thanks to your XML now the new Door/Window Sensor works properly! :D I've understood the CommandClass id="48" created two new devices ( Door/Window and Tamper ), but not the Motion Sensor ; despite it is not useful (PIR status is reported by device 0000xx00, labelled as Sensor) I'm curious ...

Thank you very much, ben, for your attention and support.

I'll be able to test your solution only next week, the installation is on my parents' home, so I'll try when I go to visit them!

I'll keep you aware about the result.

See you soon

Hi ben,

sorry I've forgotten to specify the identification values: they're id=0x000C and model=0x0002.

Do you have installed this node in your network?

Bye

Hi everybody, I'm trying to use with Domoticz rel. v3.5877 OpenZWave Version: 1.4-2228-gbce4a88-dirty the multisensor by Philio PST02-A (four in one) but the door/windows sensor and tamper status are never returned. After inclusion: 000xx03 Unknown Lux 000xx00 Sensor Light/Switch 000xx33 Alarm Type ...

Hi everybody, I ordered nine Vision ZD2102 GEN5 door/window sensors, but the seller sent me four x GEN5 and five older GEN3 items. All works well with the GEN5 items, but the GEN3 works at 50%. After inclusion: xxxx00 Sensor works properly (goes ON/OFF dependency by the magnet posistion, good ...

Maybe you can go for the fibaro binairy switch. Hi Paul, sorry for the late reply... at the end I have chosen to protect only the external jalousie, not the internal window/door, using only the embedded magnet sensor. The ZD2102 GEN 5 door/window sensor (id=0x0105 model=0x2001) works well with ...

@kman: test results with Group 1 and Group 2 associated to the AeonLabs Gen5 controller: temp reading ok lux reading ok 00=no reaction in case of motion or tapemring detection 28=no reaction in case of motion or tampering detection 32=goes always OFF on tampering detection, never goes ON, not ...

Hi Tamagnun, Any luck with trying with GEN5 controller? i.e. by only including the controller "only" to Group 2, do you see any Sensor value? thanks. Hi kman, I've repeated the group association to group 1, 4 and 5 with the Gen5 controller, the behaviour is exactly the same tham using Gen3 ...

@kman: I confirm you that Alarm Type (id 0000xx33) and Alarm Level (id 0000xx32) are updated also (simply I have ignored them) when motion detected at the same time of Burglar (id 0000xx35), I have renamed it and I use it to monitor the motion, sorry but I hadn't understood you're talking about the ...

@kman: I have two Domoticz installations: the first one is using the Aeon Stick Gen3 (black color and blue light), the second one is based on the Aeon Stick Gen5 (white color and multicolor light). On both installation I'm using Domoticz v3.5877 with OZW 1.4-2228-gbce4a88-dirty, IMHO, you have to ...

Well done!!

Last UPDATE: using the attached configuration file that I've preparred to manage properly the Gen5 version of FGMS-001, the tamper status is properly reported throught the device 000xx35. Node 1 (your ZWave or ZWave+ controller) needs to be added to the group 1, 2 and 5 in order to have all the ...

I answer to myself, maybe someone may appreciate this feedback... with Domoticz Rel. 3.5877 the FGMS-001 GEN5 the temperature is properly returned (sometimes the temperature device doesn't appear at the include time but one/two days after), unfortunately two other issues are present: - tamper status ...

Hi everybody, I need to monitor in my security system 12 doors/windows, each one with its jalousie (an external protection made by wood), and I would like to avoid to buy 24 sensors... ;) Someone has found a door/window sensor with an external contact that works indipendently from the internal ...

Can someone confirm that using FGMS-001 Z5 V3.2 the temperature is correctly read? In the official compatibility list it is reported that using v3.2 sensor the temperature reading doesn't work...

Thank you for your experience.