Impressive, especially the blocklist control via timed switches adds functionality to Pihole via Domoticz, originally not available in Pihole itself. I like that!

And in addition to the reply of waltervl: the Z4D plugin is very lightweight for the cpu’s of my humble RPi with 28 other processes running. No need to install a MQTT broker and Zigbee2MQTT. Anyway, users have a choice and I am perfectly happy with Z4D.

…and I keep bringing the good news: just updated without any problems to 7.1.025 on RPi 4 running Bookworm and Domoticz 2025.2. Thanks for maintaining this Zigbee plugin. Without it, Domoticz would be useless for me.

FYI: just updated without any problems via the zigbee webui to the latest version 7.1.024 on RPi 4 running Bookworm and Domoticz 2025.2. Thank you pipiche for keeping up the good work.

First: thank you for this new release. It makes me happy that you continue working on improving Domoticz.
Just updated flawlessly via the web-update. I’m on Bookworm on my Raspberry Pi 4. Few Python plugins, and a handful of Zigbee devices.

Hi pipiche,

Attached is the export.json file per request.

Hey all (and pipiche),
I just bought the new Sonoff SNZB-02WD with IP65 rating for outside use. I can confirm that this new Temp and rel.hum. sensor pairs and works perfectly with the Zigbee for Domoticz plugin i.c.w. the Sonoff dongle E.
Just to let you know. Maybe more of you are looking for ...

Thank you, pipiche,
Update went without any problems via the webui on my RPi 4 bookworm, latest Domoticz version.

Closing and re-opening your browser does not clear the browser cache.
See e.g., https://support.atlassian.com/bitbucket ... nd-safari/

jacobsentertainment wrote: Sunday 11 May 2025 22:32

@WouterO, no not the 12v but the 5v

Oh, I am relieved! The pic on the link you previously included said ‘12 V’, therefore my worry and slight panic.
I am happy that replacing the sd card did the trick!

You must be joking, right? I sincerely hope you’re not using that 12 volt power supply for the Raspberry Pi, which needs 5 volt only!

By the way, the reply of Waltervl was spot on.

And Sjonnie2017 is referring to an NVME SSD and not to mmc memory.

I wish you all the best with your setup.


(I’m a ...

gizmocuz wrote: Tuesday 01 April 2025 16:10 As mentioned above before, our betas are stable.

Thank you for clarifying this, I will update soon to the most recent beta. With that, I end my part in this discussion. Don’t tell the millions of software developers out there, that beta is the new stable, though.

One of the reasons you should not stay on the stable for too long.

This is só contradictory and in contrast with good/common practice!
I absolutely love Domoticz and promote this software as much as possible, but the view on Stable vs. Beta should really be reconsidered for the benefit of all.

In the past.

So, in the resent 3/4 years, can you mention a mayor change that was not backwards compatible?

That is not the point. Normal users hop from stable to stable version and should stay away from Beta versions. So, you can’t refer people to Beta versions and blame them for using the ...

Nope, but there is nothing wrong with the current beta.
We will soon rename the beta to stable if that makes you happy.

Maybe we should drop the whole idea of stable/beta and our betas are solid


Then drop it. It’s quite unusual to treat beta as normal or stable, unless it is. Then better call ...

2024.7 (most recent Stable) doesn’t solve the issue as mentioned by the OP. And 2024.6 is not that old.

Thank you (once more). That helped. I still don't know what went wrong, but I didn't want to experiment myself too much, because I was afraid of loosing all my Zigbee settings. Now I'm on 7.1.021 and all my devices are still in place and functioning.

Is it maybe relevant that I updated from hotfix 7.1.020 and not from the regular 7.1.019?

Attached is the error message from the (sudo) git pull command.

Pipiche, these days, I've bad luck updating my Z4D plugin. I was on 7.1.020. I tried both the WEB UI update and via the command line as per Z4D wiki. Both tries failed. Text file 'updateprocess' with errors are attached. The cli-commands that I used are in the first two lines of the attached file ...