Hey,
Is there possibility to add Switch selector for setting up manuall airflow on 30% 60% 80% for example?

Hey All,

I need your support as I am struggling with adding my Tahoma Switch devices (blinds and garage doors) to my Domoticzi devices.

Tried already couple of times with installing fresh Pi, Domoticz and all plugins as per Git Hub but still no luck. Tahoma account active with Developer Mode ...

sancla wrote: Wednesday 01 April 2020 17:59 You do not have to power the RFlink, the USB port from the raspberry pi should supply enough for the RFlink to work.

I know about this but someone else has advise me to try this way as well. But nothing changed.

sancla wrote: Wednesday 01 April 2020 17:14 There is probably a amp (and if it is not an original one, a quality) difference in there...

This can cause many strange and and first unexplainable stability issues with your pi.

The RPI power supply is original one 5.1V 3A
The adruino was 12v 1.5A from my router.

sancla wrote: Wednesday 01 April 2020 16:24 Far fetched, but try a different power supply. If possible, us a original one.

Perhaps it's just a matter of stability of the pi itself?

I have tried with power supply for Adruino and no difference.

Guys anyone have any idea where the problem might be?

Hi All

My Rflink stopped working again.
I had to disconnect it from rpi due to move out and after restarting rpi it is not reacting on any device.

Of course it is connected to the same USB port and no changes in setting been made.

Guys please help me out with this before I throw it away :D ...

The firmware was R48.
I have received test version R49 from one of my friends from Polish group and flashed RFLink.

Also i have reinstalled whole Domoticz from scratch and now everything works fine. All remotes have been discovered by Domoticz.

So honestly don't know where the issue was.

I am ...

See attached screen shoot. I really dont know how to operate in Linux so I have also run the test through RFlink loader.

20;08;RFUDEBUG=ON;
20;09;Keeloq;ID=4dc2;SWITCH=04;CMD=ON;BAT=OK;
20;0A;DEBUG;Pulses=82;Pulses(uSec)=330,300,240,330,270,300,270,330,240,330,270,300,240,300,240,330,240,330,270 ...

sancla wrote: Friday 27 March 2020 21:51 It's good practice to keep backend systems in English. That way, you have better community support.

But for now, it's hard for me to help you with that info. Could you perhaps send a screenshot or photo, perhaps we can make anything of it...

Changed back to English will send you screenshot on pm

Well, with that, you can actually read the raw data from the RFlink on your pi. That way, you know that it's either a hardware/Operating system issue or something in Domoticz.


So if I press the remote I can see received signal. But i think due to language is set to Polish i see only small ...

sancla wrote: Friday 27 March 2020 21:25 minicom -b 57600 - D /dev/ttyACM0 -8 -o
Without the space between - and D.

Bloody smilies...

What should i look for after this comand? I am completly new in this

Hmmm, you already verified it I just read (I should read better...).

The only thing I can think of is that you selected the wrong port in Domoticz. Besides that, I assume that everything else is stock and default?

Perhaps it's a bug with the latest version, been reading about some issues about ...

Well, that is strange indeed...

Could the RFlink be the source of your problems? You could test this by downloading the latest firmware. With that firmware zip package, you will find a Windows application. If you connect your RFlink with your computer and this apply, you are able to see the raw ...

sancla wrote: Friday 27 March 2020 20:27 https://sancla.com/domoticz/raspbian-bu ... nd-rflink/

I have done everything like in this guide but still nothing.

Just to be clear trying to add
https://www.ebay.co.uk/itm/264169258831

Was trying to add sonoff rf remote but been advised it is not supported.

sancla wrote: Friday 27 March 2020 20:26 Scan for new devices disabled?

It is enabled

Hi All
I am having problems with my Domoticz/Rflink as it is not adding new devices to domoticz.
I have bought 433 remote controler but is not picked up by domoticz.
Rflink loader is picking up signal for all 3 buttons from remote as Keeloq so it should be fine as it is supported by rflink ...

Hi All

I am planning to buy couple of below switches however I am notsure if I will be able to connect them with Domoticz.

I do have RFlink gate so I hope it will be picked up automatically.

#Aliexpress ￡6.90 53%OFF | SMATRUL 1 2 3 gang smart Wireless touch Switch Light 433MHZ RF Remote Control ...