Ok, but which one is the plugin conf file? I can't see any PluginConf.txt.
By the way repeaters lost the connections again almost at the same time. Meanwhile directly connected sensors to Zigate works fine.
After reset (no need to delete fromdevice list) seems ok.

Most likely the zigate is on channel 11( domoticz logs ) If that is the case move the WiFi 2.4 to 11 to avoid overlap https://github.com/pipiche38/Domoticz-Zigate-Wiki/blob/master/en-eng/Co-existence-of-IEEE-802.15.4-at-2.4-GHz-and-Zigbee.md Envoyé de mon iPhone en utilisant Tapatalk What I see in ...

Hi, Today suddenly some of the Xiaomi Aquara sensors what was connected to Tradfri repeater lost the connection. What is weird that one is working what connected to Tradrfri repeater. What I don't understand that Topology map doesn't show that connection. Only one another Temp sensor is visible ...

Hi, Today suddenly some of the Xiaomi Aquara sensors what was connected to Tradfri repeater lost the connection. What is weird that one is working what connected to Tradrfri repeater. What I don't understand that Topology map doesn't show that connection. Only one another Temp sensor is visible ...

Hi, Today suddenly some of the Xiaomi Aquara sensors what was connected to Tradfri repeater lost the connection. What is weird that one is working what connected to Tradrfri repeater. What I don't understand that Topology map doesn't show that connection. Only one another Temp sensor is visible what ...

i have installed 2 pcs of trådfri repeaters, i also have some aqara sensors, but it looks like the sensors doesnt connect to the trådfri repeaters, why is it like that? Hi, Do you have the the latest plugin for Zigate? It can help you to see the mesh connections. At least you should be sure that T ...

I don't know what happened. It works now after another Domoticz restart.
Sensors are visible and I can reach Web Interface. I'm in IT business but there are always things what cannot explained.

I can also reach the log of the sensors from device list but they don't appear under Temperature or Switches. I have updated the plugin also to check the web interface. Page isn't visible on DomoticzIP:9440. I have added "enableWebServer": 1, on json file and Domoticz was restarded. Can you help me ...

With the most recent version of the plugin, you have the webadmin page wich allow you to administrate the plugin and so switch the Zigate from/to Permit to Join mode https://github.com/pipiche38/Domoticz-Zigate-Wiki/blob/master/en-eng/WebUserInterfaceNavigation.md https://github.com/pipiche38 ...

When you start the plugin you have a flag to set Permit to Join between 0 to 255. 255 stands for always permit 1 to 254 stands for Permit mode during 1 to 254 seconds 0 stands not Permit Envoyé de mon iPhone en utilisant Tapatalk Hello Pipiche, It is set to 255 so it should blink (always permit) ...

pipiche wrote: ↑Friday 20 September 2019 18:42 When the Blue LED is blinking when in Pairing mode. When the Blue LED is On the Zigate is Running without pairing mode

How can I switch between the modes? Is there a time limitation how long it is in pairing mode? As I saw it is blinking in most of the time.

Hi, I'm glad to announce that both Tradfri repeater from desired distance and Xiaomi door sensor works fine. :) The issue was with Zigate. I was noticed that earlier the blue led was blinking constantly on the Zigate but not anymore. It worked fine with added devices but I couldn't add a new one. I ...

Xiaomi door sensor still doesn't want to connect. I tried to remove the battery, severar times reset even couple of cm away from Zigate. Still not in the device list. I have no issue with three Xiaomi temp sensor and Tradfri, except the distance factor. Is there any update for Zigate plugin what ...

I cannot really tell you what is the expected coverage for the Zigate. But you can have a look to that document which might give you some hints: https://github.com/pipiche38/Domoticz-Zigate-Wiki/blob/master/en-eng/Co-existence-of-IEEE-802.15.4-at-2.4-GHz-and-Zigbee.md Lats, you need also to check ...

Dont' you have a little hole ? FACTORY RESET YOUR DEVICEFor wireless signal repeater:Push a pin into the pinhole on bottom of the signal repeater for at least 5 seconds.After reset the signal repeater you must pair your steering device to the signal repeater and then pair the steering device to ...

Dont' you have a little hole ? FACTORY RESET YOUR DEVICEFor wireless signal repeater:Push a pin into the pinhole on bottom of the signal repeater for at least 5 seconds.After reset the signal repeater you must pair your steering device to the signal repeater and then pair the steering device to ...

Don't you have any information with the Tradfri repeater itself. Usally you have a kind of manual, with way to Reset Check here : https://www.ikea.com/ro/ro/manuals/tradfri-amplificator-semnal__AA-2134759-1_pub.pdf Then on Domoticz/Zigate side, you need to put the Zigate in pairing mode, and reset ...

Hello Guys,

Does anyone have experience how to pair/add Tradfri (Ikea) repeater to Zigate? There isn't any button on it. I can't find it in Domoticz devices list after plugging into the wall.

Thank you!

Yes I have 3 Aqara motion sensors Hello, Do you use this repeater? Have you assembled it by yourself? https://www.zigbee2mqtt.io/how_tos/how_to_create_a_cc2530_router.html What is the longest distance where Xiaomi sensor connected to it? I'm strungling with Xiaomi temp sensor to reach Zigate from ...

Realy nice link, I will take a look tomorrow. BTW, we have probably found someone on zigate and a CC2531 router, not sure yet, but we probably can confirm that soon. Great! I'm keen to see that. :) Do you know a solution what can extend the range on cable instead of radio frequency? For example to ...