The script as detailed in the WIKI was officially for a Pi. I have adapted it to run on a Synology NAS which I use.
Here, the -mtime did not work, but no fault-messages appeared when using Putty (via the NAS). See also later.

That made me to Google a bit more.
I found this:
https://www.hostinger ...

Hello,

I am not quite sure where to direct this topic to; but most likely the moderator knows to whom to send this mail to.

I am using the Taskplanner of Synology DAS to make a daily back-up of the Domoticz.db to a different drive, as per Wiki "Daily backup to external hdd".

It works fine; except ...

Weird, abbreviated again;
the text without the http in front; this time it must be ok.

192.168.0.43:8084/json.htm?type=command&param=switchlight&idx=357&switchcmd=On
192.168.0.43:8084/json.htm?type=command&param=switchlight&idx=357&switchcmd=Off

Weird
The following were abbreviated:

http://192.168.0.43:8084/json.htm?type= ... itchcmd=On

http://192.168.0.43:8084/json.htm?type= ... tchcmd=Off

Once again thanks for your reply, Lebo2d9.

Sorry for coming back so late, but it took me quite some time; but I think that I have figured it out now.

The problem is that the Elro Transmitter signal is being decoded as a Lightning4 signal by RFXcom/Domotics; where as a Elro AB400 switch within ...

Hello all,

I am a newby.

First some background-info.

I have 3 monitoring-systems running:
a) 1 Arduino with 433 MHz receiver to monitor 3 Temp/Hum-sensors, DS3233-RealTimeClock and 2 DS18B20-Temp-sensors.
b) 1 arduino with optical-sensor to record Elec-power-consumption and 1 IR-sensor to record ...

Thanks for your reply,

I will continue working on this, but I have difficulties with this. I will struggle on a bit and come back with reply; with (hopefully) positive result.

regards,
Leo

Hello all,

Since I changed from Domoticz v4.9700 to v4.10717, I have difficulties with setting-up switches.

I can set up ‘master’switches, with no problem. And at every master-switch, i can, via Edit, select slaves for each switch via the bottom part of the edit-screen. (The devices shown are all ...

Hello all,

First off all: I am a noob

If have a question:
I have quite a lot of Elro AB440 switches, controling lights and blinds (non-somfy)
I can control all of them, via Domoticz/RFXcom433XL and/or Elro remote.
Now my question:
Is it possible for Domoticz to change the switch status, e.g. from ...

Thanks McWieger,

The first part of your reply did not work as the Domoticz auto-update is grey-colored, hence no auto-update via DSM.

The second part of your reply worked perfectly"
-downloaded the correct Domoticz from mentioned site to PC
-in NAS/DSM'PackageCentre, selected Manual Install ...

Hello,

I am new here. I am a complete noob.

I have Domoticz v4.9700 on my Synology NAS DS118, with DSM 6.2.

All the time I have a warning on the right-top side that there is an update available, version 10717. When I click on UPDATE NOW, I see a dial; counting up from 0 to 100. but, system is not ...