Apologies it took a few days (and tries) and I found the following:

- the slave installation of Domoticz has the same issue after a day
- the 2 connectors on my primary Domoticz are both throwing errors
- the errors start appearing around 16:00 when the sun goes down
- the errors will keep going in ...

Hi,

It could all be a coincidence, but I just installed a second API interface (under hardware) with the same API key and that is returning data now. The old API connection is still there but shows no data.

Let's see how this develops in the upcoming days.

PVoutput still going strong without ...

You triggered me with your question.
I also have a slave Domoticz running on my Synology.

What I did:
1. Installed the SolarEdge API on the slave --> it seems to pull data just fine.
2. Installed a second SolarEdge API in my primary Domoticz --> to my surprise that pulls data just fine.

So ...

Yesterday I received some data. Today only errors.

I'm running version 16818 in Docker.

I'm also experiencing issues with the SolarEdge API connector throwing error "Error getting HTTP Data" since the upgrade to 2025.2 (from 2023.1).

I'm using the same API key in PVOutput.org and there it is working fine.

So this definitely looks like something related to the Domoticz plugin, not to ...

Perfect!!

That did it. Thanks!

Same issue here. Not getting any SolarEdge data anymore.

I also use PVOutput with the same API and there data from SolarEdge is coming in.

So it looks like something related to the plugin in Domoticz.

This is my configuration: I do not have dynamic pricing.

This is my energy dashboard:
I noticed that water is showing a cost.

My energy costs still stay on 0.00€ in the Energy Dashboard and in the graphs.
I have upgraded to 2025.2 about a week ago.

The energy cost is shown correct in the reports.

Any idea what might be wrong?

Hi Waltervl,

I don't understand what you mean with "the config topic of a MQTT AD device"?
Can you elaborate?

Hi,

One reason why I have not moved my Domoticz tot the latest version is that I would need to move to Zigbee2MQTT Auto Discovery.
The main issue I have with that switch, is that Z2M AD does not create selector switches, but new devices per state of the input device.

In my examplte below I use a ...

Did any of you get the Tuya RB-SRAIN01 / TS0207 sensor working in Domoticz?

I received the sensor and updated my Z2M. The sensor is recognized perfectly in Z2M. However in Domoticz I only get 3 devices: Link Quality, Battery and Illuminance. Nothing more. Raining would be nice. I use the Domoticz ...

Maybe have a look here: https://www.domoticz.com/forum/viewtopi ... 14#p304014

Top Tip!! This indeed solved my problem with the zigbee blinds after upgrading Domoticz, zigbee2mqtt and the plugin.

My Pi crashed a few days ago and since there is almlst no Pi's available I went to an Odroid N2+

Thanks very much.

So this panel uses the X10 protocol?
I use the Pro1 firmware which also has the X10.
Have to find out if enabling X10 it does not interfere with my other settings.

Edit.
I downloaded the RFXCOM manual, and now I see the Kerui mentioned. ;)


No the panel doesn't use X10. It is indeed directly ...

Kedi wrote: Sunday 18 June 2023 8:23 Tnx. for the answer.
Is it the Ext, Ext2, Pro1 or Pro2 firmware?
And which mode is used?

It's on the EXT firmware as I also have some legacy X10 stuff hanging around which is being replaced step bij step.

Thanks!!

To answer both questions:

To receive the 433MHz I use an Rfxtrx433E.

Indeed have a powered USB hub connected to my RPi3B.

Hi,

for some time I've been thinking of creating my own alarm routine in Domoticz using dzVents and below you can find my first version of dzHomeAlarm.
Keep in mind: I'm not a programmer, have a full-time job and a family. So, just managing expectations :lol:

Included in the code are:

State ...

Hi, First of all, this is the best looking interface to control Domoticz from the galaxy watch at the moment. Nice work.

There is just one issue I run into. When I have selected a group, for example lights, and I want to go back to the main overview, then it just refreshes the current list. I ...

In the past 2 days Domoticz is not showing the kWh anymore.
Anyone else getting this result?