Dear all, I solved the below with a reinstall of the entire SD card on my Raspberry Pi5 on Bookworm. For completeness, also created a new smart-home-key.json with different IDs. I will leave the post for further reference. Thanx! Hello people, I have both Flask (DZGA) and Domoticz installed fine ...

On github I found a project matter.js (https://github.com/project-chip/matter.js) which seems to be something for developping matter-bridges to existing smarthome-systems. Onother thing I found is matterbridge (https://github.com/Luligu/matterbridge) Could this be something for domoticz? When apple ...

Pffffffffff, Once more, after a few hours work, I'm complety lost again: [test] app could not be reached, please try again . I noticed that things translated a bit messily from Domoticz. Devices I put in a room in Google Home were found in the wrong room. In Google Home, devices were set to offline ...

Now working with: It was the double dash I think

Thanx for working with me guys

Got it!! Sorry for the extensive writing above but it looks like I was able to partially fix it. When I created a new project Actions on Google, I found out that some new things need to be filled such as contacts, developers, email addresses and more. Even photos. I found a description of what I ...

I am still trying to provide some additional information. I run into some other strange things that do not clarify for me, but perhaps another person. When I log in with http://xxx.xxx.xxx.x:8181/settings I get into the user interface just fine and everything seems to work fine there. The same is ...

This does not seem to work, or I am doing something wrong of course. To make sure it wasn't due to the current installation, I did a new Bookworm installation with the latest Domoticz version. I keep getting the message that the virtual environment is externally managed. I looked up the relevant ...

Still, I do encounter a little problem unfortunately. DZGA Flask seems to work for the most part. the server data is filled and there seems to be a connection between Domoticz and DZGA Flask. I have created a new admin and SSL also seems to be working as I can log in nicely with my domain name. The ...

DewGew you are a hero. I was planning a rollback to the RPi 4B with Bullseye tomorrow.
Super thanks for your work, no doubt it will have taken a lot of time again.

At least you made me very happy. Thanks!

The post below had been placed in the wrong forum topic due to a misunderstanding. So restored in this one. Hi all, I'm on a RPi 5 running on Bookworm. Bullseye is no longer supported for this hardware. see: https://www.raspberrypi.com/documentation/computers/os.html#python-on-raspberry-pi Due to ...

Hi Xenomes, I'm on a RPi 5 running on Bookworm. Bullseye is no longer supported for this hardware. see: https://www.raspberrypi.com/documentation/computers/os.html#python-on-raspberry-pi Due to changes in the way pip should be handled now, I seem to be running into a problem with getting Tuya ...

louresman wrote: ↑Friday 01 December 2023 20:44 Hi DewGew,

After the latest update, I can now access the user interface and see my Domoticz devices.
Thanks for your work fixing this issue.

Just to be clear: This is not on Bookworm or a RPi 5 right?
Thanx

Hi DewGew, Very glad you apparently had the opportunity to take a look. Unfortunately, your work so far has not had the desired result. Below I'll just show you what's happening on my end and I'd love to hear if I can test something for you. Thanks in advance ...

Unfortunately, this is not a solution for me. I had already configured this nicely. Since Bookworm there seem to be some problems with pip in Python and I thought that might be where the problem lay. Unfortunately, that does not appear to be the case either. It applies to both DZGA and DZGA-Flak. I ...

Is no one affected by the problem I am encountering in not beeing able to bring up the Dzga configuration page? I had everythig working in a prevoius instalation using Rasperry Pi OS Stretch, but decided to do a clean install of the OS. I opted for Bullseye because I believe it is the version which ...

Hi DewGew,

Sorry, sorry, sorry. Please forget the above.
I had an issue with my reverse proxy and after repairing this I linked my account and al devices were added to my Google home.
Still a few minor issues but thats ok for a sunday. Once again: sorry!

Ok DewGew, thanx, In that case, I probably have something else I can't get working. I have gone through all the steps and am actually at the last part where I get stuck. In DZGA I can see all the devices added in Domoticz and I am logged in nicely. The log shows no strange signals. However, when I ...

Hi Kedi,

Thanx for this quick reply.
Can you please explane this? What do you mean with escape the & char?

The DZGA configfile says: # Login on Google Home app and configuration interface
Thats means my password on Google Home needs to be (exactly) the same as de Userinterface, right?

Thanx!

Dear folks, hi DewGew, After Controlicz (MadGenie) discontinued, I was looking for a good alternative. I thought I had found this in DZGA. By now I have DZGA (partially) working on my RPi. I am now running into the fact that my Google password contains multiple & characters and it seems that DZGA's ...

Thanx Jan-Jaap. I've send you the requested logfile.
Let me know what I can do.

Jan-Paul