Good morning, I no longer receive information with Recycleapp, do you know what is happening? THANKS werkt bij mij ook niet meer. Ik vemoed dat de toegang tot de api niet meer werkt. Ik heb nu gewoon de agenda van de recycleapp gekopieerd naar mijn persoonlijke agenda die ook zichtbaar is in ...

tried this plugin to get my smart life "IR remote control" in domoticz. but I get this error; handleThread: you cannot auth exceed once in 60 seconds. looks Like smart life blocks if you check every 10 seconds the status of device. Anybdoy a solution? Or am I the only one with this problem?

i ended up using the multipliers on my analog inputboard to do the calculation.

update, but still not working CODE: SELECT ALL return { on = { timer = { 'every 1 minutes' }, }, execute = function(domoticz, device, timer) local chloorcal = domoticz.devices('chloorcal') local chloor = domoticz.devices('chloor').value local factor = 1.4 local chloorcal = tonumber(domoticz.utils ...

help: I Have a chlorine sensor connected to domoticz. (this is a analog sensor) name in domoticz: chloor. I want to make a calculation with the value (devide by 1.4) That value should then update a dummy sensor named: chloorcal this is what I have now. But it doesnt work. Any idea anybody? return ...

update: already installed 4 machinon's now. Still very happy with the product.
Only one time I had to restart the machinon, because my router broke down, and my complete network was going crazy.

fixed: this is the correct syntax: sudo sh -c 'echo 2 > /sys/class/gpio/export' sudo sh -c 'echo 3 > /sys/class/gpio/export' sudo sh -c 'echo 4 > /sys/class/gpio/export' sudo sh -c 'echo 17 > /sys/class/gpio/export' sudo sh -c 'echo 27 > /sys/class/gpio/export' sudo sh -c 'echo 22 > /sys/class/gpio ...

When i put this in rc.local, the in and outputs are created, but the startup state of the outputs doesnt get created. echo 2 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio2/direction echo 1 > /sys/class/gpio/gpio2/value echo 3 > /sys/class/gpio/export echo out > /sys/class/gpio/gpio3 ...

I had enough of my denkovi modules. They don't interface correctly with domoticz. There is a big poling lag, and the tech support of denkovi cant seem to fix it. So I searched for something better and now I have installed a prototype of the machinon. https://www.machinon.com/ Check my blog to see ...

for the garbage collector to work I need to fill in in the php path:
config['dashticz_php_path']='******'
Does anybody know what the php path is on a synology nas?

kind regards,
Benny

super! going to order one now

I would like to buy a new thermostat, a nest v3. Can i adjust the desired temp from my domoticz screen? Can i read out the nest thermostat, and see the values on the domoticz screen? (or do I als need the opentherm gateway kit?) anybody with some printscreens on how the nest integrates in domoticz ...

The input module now has the switching mode I asked for. super quick reaction of denkovi! I can now switch my lights (with the standard wallswitches) without the need of domoticz and without a delay. I dont care about the update of the lightbulbs in domoticz after 4 seconds. And switching the lichts ...

I use denkovi smartden ip-32in and smartden ip-16R boards as in and output. they work correctly. But when I make a input "high", (put +12V on the input) I only see the status change in domoticz after 45sec. When I watch the input board from the denkovi software I can see the status change ...

oh my god thanx!!

already tried in chrome incognito mode, there the devices also do not show up.

anybody got an idea why i cant see all my devices in blocky? see attachment.

link to printscreen:
https://1drv.ms/u/s!AtlIdFrh2tzBhZ9eSRn0sac-q-cQGg

problem solved. needed to clear the cache

in edge I see an extra config screen. But I cant save (with the red save button)
in chrome and firefox I dont see the extra config screen. Anybody got an idea why this is.
I have domoticz installed on a synology.

thanx for the info