I'm not using this script anymore. I use a combination of geofence and ping to determine if someone/a phone is at home.

Hi, I experience some problems with this doorbell since the end of December. It was working fine before that time. The signal of a button press isn't received/recognized by Domoticz anymore. When I press the dummy doorbell button in Domoticz it's sending the signal to the ringer and that part is ...

cannot set my Xiaomi coolcam motion .. The sensuality level stays on 2.. what i try, i cannot set it on 3 or 4..? Hmm... the same for me, I also tried to set 12 and 14 instead of 2 and 4 which the sensor takes.. only not seeing any difference in sensitivity. For parameter 9. Basic Set Level: (lux ...

I have the same system, does someone know if it's possible to get a status update from this device on your pi? And from there in Domoticz? I was thinking to connect it with wires to the GPIO and retrieve status like: armed, unarmed, alarm, sabotage or something like that. Anybody has this kind of ...

Ok, nice. I've added to the wiki as well.

Great, tnx for the quick response! Did I missed this in some wiki or isn't this one described?

Hi,

someone knows if it's possible to retrieve the available roomplans via a JSON call? If so, which JSON call should I make?

I'd like the app very much as mentioned before. Although two feature requests so far:
- Option to show switches in the order set in Domoticz (not by alphabetic order) by default
- Option to open the app with a specific roomplan (would make the app very girlfriend proof )

Great job guys! Looks very promising. I've had a couple of crashes so far. All related when setting a dim /slider value from the dashboard. No problems in the switches part. If there is a need for some debug log, please let me know how to provide one to you. I'm using the app on a one plus one btw.

I've bought a low cost window/door sensor from dx.com and can confirm that it is compatible with Domoticz. OUDI AD-87 433MHz Wireless Door Contact - White http://www.dx.com/p/oudi-ad-87-433mhz-wireless-door-contact-white-248919#.VkM1GrcrKUk Photos : Unpacking: https://goo.gl/photos ...

If you don't need the graphs etc. you could use the text sensor. I'm using it to register the travel time home-work.
Any idea already how to measure the speed en returning the value to Domoticz?

Thnx wizzard72, I will try those settings later on.

I thinks it's not only the low power. The lightbulb is a old incandescent lamp and no led so that couldn't be the problem. To make it sure a replaced the fibaro FGD-212 with the old one FGD-211. No problems at all, not with switching on or off or using extreme low dim levels. So I'm gonna test it in ...

Too bad, I don't have any experience in adding a device. I've looked into once for the Eminent power meter, since it was the same as some other device which was already present in OpenZwave.
But it seems you made some progress.

You could check here: https://github.com/OpenZWave/open-zwave ... ecific.xml
If it's not in OpenZwave, it's will probably not work in Domoticz.
And more about adding a device to open-zwave: https://github.com/OpenZWave/open-zwave ... ng-Devices

I've also try to give a look to the ZWave log, but I don't really understand :-) Actions I performed during this log: - turn on by GUI (pressing on) - turn on by GUI (pressing low dim value) - turn on by GUI (pressing medium dim value) -> this point the light flashes - turn on by Switch -> light ...

If I set a low dim value (approx 5%) in the GUI the light flashes. When I press the pulse switch the light goes on at the level it was on before.
So not at the lower level.

You mean by switch setting this one: 20. Inputs Button/Switch configuration ?
It's set to Mono stable input. And since I'm using a pulse switch i think it's correct?

The minimum dim level is set to 8% by auto calibration. Set it to 15% but that doesn't solve the problem.

I recently installed a new FGD-212 dimmer.
When I set this dimmer to a low light level using the UI (or a LUA script) the light turn on and immediately switches off.

Somebody experience similar problems and knows how to fix it?

Great tip, I will try later today. Changed this part $traffic=file_get_contents('https://www.waze.com/row-RoutingManager/routingRequest?from=x%3A'.$startlon.'+y%3A'.$startlat.'&to=x%3A'.$endlon.'+y%3A'.$endlat.'&at=0&returnJSON=true&timeout=60000&nPaths=1&clientVersion=4.0.0'); to $curl = curl_init ...