Hello, I would like to move from a windows OS to Ubuntu. I have a lot of devices installed and running fine on my windows OS with Domoticz (Aeon stick), and I dont want to reinstall them manually one by one... Is there a way to backup all my settings, including scripts, themes ,... and restore them ...

Small test in my office : put the setpoint to 25 --> valve react immediately at 60%opening. Set back to 21.5 --> valve closed. (Ambiant temp report = 20.7)

Thank you Micha.

I will give it a try tomorrow.

I am thinking about an integrator saturation inside regulation loops.. if no anti windup is implemented , it takes a huge time to recover the integrator result...

If this is confirmed other people should have the same behavior...

Thank you Micha.

I will give it a try tomorrow.

I am thinking about an integrator saturation inside regulation loops.. if no anti windup is implemented , it takes a huge time to recover the integrator result...

If this is confirmed other people should have the same behavior...

My office setpoint has been set to 21.5 since 14PM. It is now 19PM, and the temperature has not increased, there is still 20°. Valve opening still at OFF. Display on the valve displays well the setpoint (21.5)

Example : switching from 19 to 21. Valve opening percentage stay to off even after 30 min. Begin to open slightly 2....3...4% after 1 hour). Setpoint reached after maybe 2 hours.

I precise that hot water flow is made available all the time. Mechanical valve stud is OK.

Hello, Thanks for your answer and your useful script, In fact, using the eco mode or reducing the setpoint in heat mode produce the same problem : when a setpoint of 21 is applied after a low value setpoint, the valve does not move sufficiently fast after the change, takes some hours to begin to ...

Hello! I have installed 5 spirit valves I'm my house. Within domoticz, on zwave point of view they work perfectly : setpoints, mode,... are directly received by the valve. Nevertheless, I have a small regulation issue. When I come from a low setpoint value(ex 18°) to a comfort value (21), the valve ...

I will do some tests but I have also noticed that when working in heat mode, the value of valve opening percentage seems to be incoherent wrt real valve opening...

Hello, I have also 5 spirit valves. I use blockly to control them without changing the thermostat mode. During night or when I am not at home, I set the set point to a low value (17deg for example), in normal heat mode. But I think that it is not the right way to operate these valves. I have the ...

Thanks Egregius , indeed the refresh command updates all information but .. not the setpoint value... so this will not work

No other idea to make a one time polling ?

Nobody can help me ?

The "RefreshZwave" script that I found is the following : #!/usr/bin/php <?php $domoticzurl='http://ip:port/'; file_get_contents($domoticzurl.'json.htm?type=openzwavenodes&idx=5'); //Change idx to idx of zwave hardware RefreshZwave(10); //Updates zwave device with zwave ID 10. function RefreshZwave ...

Hello, I have one FGT001 heat controller working on domoticz. I would like to poll the device when a temperature setpoint is sent to it (after some seconds). (For those who are following the issue with the FGT001 is that OZW does not handle the way the FGT001 send back its new setpoint value ...

Hello! I just got back my heat controllers updated to last firmware 4.5 I installed them in domoticz. A good news is that even if you don't have external temperature sensor, now the internal valve temperature is listed in the domoticz devices ! (This was not the case before...) I will test the ...

Hello, Some additional information... When I try to poll the battery status from the Domoticz control pannel, I get the following lines in the LOG: 2019-03-01 08:25:42.744 OpenZWave: Value_Added: Node: 15 (0x0f), CommandClass: INDICATOR, Label: Indicator, Instance: 1 2019-03-01 08:25:42.744 Status ...

Hello, I have installed a NeoCoolcam siren on my domoticz system. Everything works great since I am able to turn on the siren and modify the Zwave settings. Nevertheless, I have no battery status reported in my device list... the battery level is always locked to "-" I have tried to enable polling ...

No update for the moment.

There is a new config file for the fgt001 on GitHub. (14 date ago) someone has tested it yet? Any change?

Well you know samualAN, I am willing to accept that sometimes things go wrong. No problem, as long as the problem will be fixed properly. And this is where I--and many others--have a problem with Fibaro. The not-so-local reseller of Fibaro charges me per device. That's even more money spent on ...

Still the issue of not seeing the read-only tags in '3. Additional functions status (READ-ONLY)' It does not appear in the config settings at all, even not in read-only mode (as it should) Available settings: 1 (bit 0) - optional temperature sensor connected and operational 2 (bit 1) - open window ...