That's a great idea.
clinkadink : I tried all the cgi-bin possible for my Amcrest camera with user, pass but the cam always sends a popup that asks for user/password. The only way to get the picture in a browser is user:pass@server:port and it unfortunately doesn't work in dashticz
Maybe I need to ...

I had to install beta. Master branch didn't work

Hello,
I have 4 cameras in my dashticz but one of them isn't displayed. The 3 others do work.
The camera giving me problem is an Amcrest IPM-721S.
According to them the snapshot command is : cgi-bin/snapshot.cgi?1
Here is my CONFIG.js :
blocks['cam_buanderie'] = {
type: 'camera',
imageUrl ...

Hello waaren,
Thank you for your answer. You're always here to help us
Indeed I found the answer in another thread from you.
I had to change something in /etc/init.d/domoticz.sh
I replaced :
DAEMON_ARGS="$DAEMON_ARGS -log /tmp/log/domoticz.log -loglevel normal"

to :
DAEMON_ARGS="$DAEMON_ARGS ...

Hi,
I've added the script in domoticz (from the web interface) and changed all the values to fit my configuration.
Is it normal that I don't see anything happening in the logs ? Dvents scripts are enabled in the settings and I've put log level of the script to DEBUG
Running domoticz 2020.01 (last ...

I've received my doorbell 6 today and already tested it a little bit. The curl command from pdg007 works very good. Thank you for the tip.
But the volume is way too high. I've tried to set up the maximum volume with Z-Wave PC Controller on my computer like Hencor told us to do. I've followed the 6 ...

Hello,

Would it be possible to add an option within the switch notifications ? I'd like to be notified only when a switch is changing its state (for example from on to off).
I have some devices that send "on" state more than one time (motion detector) making me receive several notifications instead ...

Yes it's explained how to change the volume with a windows computer and for a simple use. But I'd like to be able to change the volume within domoticz siren should be loud, fire alarm also but with another tone. And doorbell should be not so loud

Thank you so much pdg007
I've now ordered the alarm Maybe one day someone will find how to change the volume

Hello
I started this topic almost one year ago and did read the whole thread. I've seen the workarounds you found but I didn't buy the doorbell 6 yet. Do you recommand it ? I need a doorbell button and a siren for my alarm. Will the doorbell6 do the job in domoticz ?
Thank you

Hello

I'd like to buy an Aeotec Doorbell 6 (or alarm 6) but it seems not to work with domoticz yet.
Here is the official site of the device : https://aeotec.com/z-wave-doorbell/
This french online shop has tested it : https://www.domotique-store.fr/fr/domotique/modules-domotiques/sirenes-alarme ...

Hello,
I don't know if this has been discussed before. I use aqara motion sensors with zigbee2mqtt.
When I was using Xiaomi officilal getaway I was able to set a Off delay to the sensor, making the motion sensor going to off 5 seconds after motion detected. I had then that kind of log : https://i ...

janpascal I'd like to use your lua script to indentify who is using the tag on my zipato.
However my OZW_Log.txt doesn't say much about it :
2019-03-17 17:25:05.333 Always, End of queued log message dump
2019-03-17 17:25:05.333 Always,
2019-03-17 20:22:57.319 Error, Node004, ERROR: Dropping ...

Marcello1970 : Thank you so much ! It's working here finally
I have now to figure out how to use it. Btw I'm able to talk to my bot directly in private but is it possible to have the command in a channel shared by a group ?

Sorry I still can't make dtgwork I can't help you
I was unable to compile the libraries for lua, I don't even know how to do it. If somebody has them compiled for the Rapberry 3B (ready to use, like the 2 rar files on the first page of this post) please send them to me

I dont have on off switching problems
Could you also check if you have this problem : https://www.domoticz.com/forum/viewtopi ... =6&t=26949
Thx

Yes same here
KWh usage shows -2.14748e+07 kWh
Watt usage is ok

Yes it runs OK. I didnt check the led settings.
But everything seems to work fine in domoticz. The kWh mesure aswell


2019-02-11 23:03:18.097 (Zwave) General/kWh (kWh Meter)
2019-02-11 23:03:18.430 (Zwave) Usage (Poele)
2019-02-11 23:03:18.432 (Zwave) General/kWh (kWh Meter)
2019-02-11 23:03:18 ...

I was searching for camera recordings on surveillance station when I found this (quite old) post.
You don't really need this script anymore.
You can add an action rule directly in surveillance station, telling it that an external device will do some actions you want (send a notification, start ...

If I put for line 49 and 50 :

local yesterday = os.date("%Y-%m-%d",os.time()-2*24*60*60)
local dayBeforeYesterday = os.date("%Y-%m-%d",os.time()-3*24*60*60)
your script returns me 9.68 € which is almost the same than what I see in the gui screenshot (Dimanche = Sunday = Yesterday = 9.67 €)
So ...