Not sure what you are doing but the plugin web interface is directly accessible from the custom tab of the main Domoticz interface.

claude2666 wrote: ↑Sunday 31 October 2021 10:38 To make the Zigbee plugin menu work again, you need to set the api_transport device created in the devices menu to used.

Thanks a lot! It works!!

I have now about 10 of them in various rooms and places. They are not ZigBee but Bluetooth and Bluetooth only :-). You need to flash them to have them broadcast the temp and humidity reading, but it is an easy process. I'm using my Raspberry Bluetooth connection, works good. I highly recommend them ...

I went the opposite route, i.e. fully independent sensors and actuators and everything controlled by the Raspberry PI / Domoticz and custom scripts / Python. I have to admit that there are still some mornings where I need to reboot the PI (cycling power on it is something everyone in the house can ...

BTW in addition to the above, you should soon find out (if not already ;) ) that the difficulty is not in the electronics or the command script, but in the mechanical integration of the servo with the blinds (there it really depends of your blinds and the torque required) and in bringing power to ...

If you want to control one (or two) servo motors over Wifi you can do this directly from the ESP8266! The Arduino is completely useless!! You simply have to connect it to one of the GPIO. Then you can control it like this https://www.letscontrolit.com/wiki/index.php?title=Servo using ESpEasy (v1) or ...

Many thanks for putting this together and sharing. Very nice work!

@pvm is right. The Fibaro RGBW module has 4 inputs so you can connect up to 4 switches to it! Have a look at the user manual there's a schematic for it: Manual. See Figure 7.

However, after two plugs completely dying on my fridge I do not dare to try a third. But with 180W this cannot be the cause. Or, could a non grounded plug be the cause? It is grounded, but just for the sake of options it could be that the ground on this socket is not connected well. The issue is ...

Unfortunately you need a neutral wire and you have only the hot wire. From Fibaro user manual: "The Relay Switch 2x1,5kW is designed to work on three-wire electrical system only, i.e. it needs the Neutral wire." You don't have any solution unless you somehow can bring a neutral wire in the box.