I finally have one of these, I added it to my ZWave network but it sits in the hardware section under the controller as "unknown" and I can't see any new devices in the devices section for buttons. Also trying to use it to activate scenes does not work, it "times out" when pressing any of the 4 ...

ahhh interesting! yeh mine is powered as well and other parameters can be updated and stick. Ok interesting, I wonder why the LED setting is there if it can't be altered

I have a couple of these devices which work quite well but in recent times I wish to turn off the green LED that illuminates after motion is detected. The setting is available to change within Domoticz but it doesn't seem to stick. Even opening the Z Wave control panel the LED setting can be set to ...

@soetew a thread you might find interesting is the one over at
viewtopic.php?f=31&t=12539

the Remotec Scene Master device is pretty similar in operation/functionality to the Wallmote it seems.

My one question now for those that have one of these Remotec devices or a Wallmote infact, is that I assume that due to the limitations of OpenZWave (as these are only a recent addition) you just get the standard 8 buttons (or 4 buttons in the case of Wallmote). What I mean by that is that the ...

Thought I would add to this thread in case anyone is reading it prior to purchasing one of these devices. Decided to get one as the Aeotec Wallmotes were out of stock at my usually ZWave supplier and they are also 2/3 the cost ($65 vs $99) with twice the number of scene activator buttons. While not ...

Well looks like I have managed to fix my own problem after some messing around. Figuring I had completely screwed my Domoticz install I thought I will just start again. I uninstalled Domoticz, then uninstalled all Python elements, reboot. Install the 32bit latest version of Python (found the 32bit ...

Help - Broken Domoticz after attempted plugin install. :oops: Apologies for the long post but just need to list all the steps I took that have resulted in my Domoticz install dying. New Broadlink RM Device arrives Setup on Wifi, set static IP within DHCP for device Checked Pre-reqs and had Python 3 ...

Awesome! now I know these are a goer looks like they will be my next purchase!

Sweet! yeh I figured it was only four buttons. Yeh I am look for it for the same toggles and dimmers. Way to switch lights, appliances on etc. Guessing dimmer works by using a "long touch" on one of the quadrants?

This is some good news! Let us know if you get the off working as well. Some screenshots would be great as well.

What is the quality/feel of the Wallmote like? can you feel the button presses in each quadrant (like a micro switch) or is it purley just touch/tap ?

Interesting, I had held off buying them purely as I was waiting to see them fully supported. Almost pulled the trigger this month as I thought they were all go now

Hello, I have finally got myself one of these and have connected it into my ZWave network. The devices are as per screenshot below https://u12438931.dl.dropboxusercontent.com/u/12438931/Forum%20Screenshots/Domoticz/Devices.png I have inserted two of these into Domoticz. I get these type of buttons ...

ok no problems, do we know how often that happens (the integration of the latest versions of Open Z-Wave) into Domoticz?

Thanks @Thorian, sounds like it is working for some crew? We just have to wait then for the latest Open Z-Wave to be incorporated into Domoticz?

Thanks! if someone sees it in the pull requests before me can they post up on one of the threads? either mine or this one. Also if some crew that have them setup in Domoticz want to post up some screenshots of the functionality I would be pretty keen to see that to

I see you found my other thread on this;
https://www.domoticz.com/forum/viewtopi ... 24&t=16372

yeh not sure, I suppose one way to test is to install the latest beta version of Domoticz and see if you have functionality?

Following, really wanting to get Wallmote, they look so useful for different tasks but had posted earlier and was told they weren't compatible yet.

Please update the thread once you have working

thanks

thanks for the prompt response! Ok no problems I will keep an eye out, probably a month or two before I can afford to lash out on a couple of them anyways. They look super useful a few different scenarios though, looking forward to it!

thanks

Hello,
Noticed these are now available in Aus;

http://www.smarthome.com.au/aeotec-wallmote-quad.html

Are these supported natively within Domoticz? Anyone using one (in or outside of Aus) and thoughts?

thanks