Hi all,
I have been with domoticz for years (always happy!) and over the last 5 I am mainly using dashticz as it shows everything very clear! But since the limitation to weather forecast and the difficulties I have to access it from outside my network (I use a raspberry pi as server) I am about to ...

Hi, what exactly do I have to do it? Just add another confi line on CONFIG.js? I did and get an error when trying to connect

fantastic! Now everything works. Would never figure this out by myself! Tks @FireWizard!!!

hi FireWizard,
I can turn on/off with domoticz or NORA and it works perfectly! But when I use google mini (voice), something gets stuck as the switch in domoticz turn on, but the light does not. Any clue how I can troubleshoot?
Tks!

Hi All,
I have been using node red x nora x domoticz for several months now....
but something is weird now.....

Capture.JPG

I have a flow in NODE RED as below. I can turn it on by voice (google home) and it switches on domoticz and nora on the web, but not physically. Never saw this behaviour ...

Tks again @FireWizard!
All set!

Hey @FireWizard,

I tried to tweak and compare a few flows..... Now it works, but with something a bit different.....


[
{
"id": "966f530f88a9e949",
"type": "tab",
"label": "Flow 1",
"disabled": false,
"info": "",
"env": []
},
{
"id": "cdb1e20b77f2b2af",
"type": "function",
"z ...

tks @FireWizard, that is really strange. I can trigger to turn it on. I see it in debug, but domoticz does not change. This scene I setup years ago:



Anyway, I will use the 2 switches as they work well

Tks again!

Hi @FireWizard,
I think I am doing something very stupid/lame.....
Anyway...
1 - I am using voice command and I can see in debug:
10/25/2022, 3:49:09 PMnode: debug 34
msg.payload : Object
{ command: "switchscene", idx: 1, switchcmd: "On" }
10/25/2022, 3:49:10 PMnode: debug 34
msg.payload : Object ...

@FireWizard,
Tks so much again! The code is now simpler and works like a charm! Can not tk you enough! ;)
The only one I did not really get is the scene. I would prefer the scene than the switch to be hones as I prefer not to have another icon in my google home.

I added the scene, but does not ...

tks again @FireWizard! I just edited the post. Did not know how to embed the code

Tks @FireWizard! And sorry for duplicating the post. Fully agree and understand your comments! ;)

I was too fast in my post. Yes, I am using SmartNora ;)
Here you have my flow
[
{
"id": "6e251134eafd988e",
"type": "tab",
"label": "Flow 3",
"disabled": false,
"info": "",
"env ...

Tks so much @FireWizard!
Indeed it is much simpler than other methods...
I managed to add a single switch without any issue, but now I am struggling on how to make the scene to work. I can turn it on, but not turn it off. Google responds with: "power control is not supported yet"
Anyone with ...

I just started to use Node-RED this week. I used IFTTT for years to turn on/off lights through my google mini. As they do not support it anymore, this is the easiest tool I found!
I am able to configure everything to turn on/off 1 switch per "flow". I am using domoticz-node-red-nora.
But I am ...

Tks @meal!
I just tried to use DZGA, but find too complicated to configure for just 2 commands I need.

Does anyone have a suggestion on how through a voice command "hey google, turn on stairs", trigger a webhook? I can enter the URL in any browser and the lights will go on/off. There must be ...

Hi everyone..... Trying to make my google mini to trigger a scene. Before it worked. But since ifttt/google assistant changed (2ys ago aprox) stopped working. I tried to recreate, but do not stop getting errors.
if I open the URL in a browser, I get:
{
"status" : "OK",
"title" : "SwitchScene ...

In case some of you are interested, here the solution for the Mijia V2 (
https://github.com/erdose/xiaomi-mi-lywsd03mmc
model LYWSD03MMC
I am getting sometimes an error "Failed to connect to peripheral", but it works from time to time and I can see the data in my domoticz

Hi All, could anyone solve tis?
I am also stuck after following the instructions above:

Traceback (most recent call last):
File "domoticz_mijia.py", line 5, in <module>
from mijia.mijia_poller import MijiaPoller, \
ModuleNotFoundError: No module named 'mijia'


Any help?

I just sorted out. Posting in case helps anyone.... Was fairly simple.
Created a dummy sensor (idx 17) in domoticz
On the Sonoff Bridge at "domoticz parameters" I assigned the idx17 on Count/PM1
And the script below in domoticz:

return {
active = true,
on = { devices = { 17 } },

execute ...

Hi All,
I got several door sensors and a sonoff bridge.
I uploaded tasmota to the bridge and it is working fine. I can connect to its IP and also see it in domoticz following the instructions from Jelle Peters on youtube
https://www.youtube.com/watch?v=Y4UlFjPT5do.
I can see the door sensor in both ...