Domoticz

After a service restart of Domoticz the Enphase envoy stopt communicating with Domoticz. Running stable 2025.2. Enphase software D8.3.5386. I saw this problem earlier in this forum, and switched to beta 2025.2 17057. Communication is working again. Maybe its time for a new stable?

Are you getting normal readings? This month has seen my Enphase-supplied figures go haywire. From-grid, total usage and generated figures are all loopy. This is with the nightly Domoticz beta and software version 8.3.5167 on the Envoy-S Metered gateway.

31st Jan: 30 kilowatt-hours used
1st Feb: 361 megawatt-hours used
2nd Feb 1.05GWh
3rd Feb: 60MWh
4th Feb: 754MWh
5th Feb: 242MWh
6th Feb: 1.5GWh
7th Feb: 181MWh
8th Feb: 30MWh
9th Feb: 30MWh
10th Feb: 152MWh

Apparently I was pulling using 62.5 megawatts all day on the 6th. That'd pop the substation running the town.

i am seeing 2 counter jumps on 31 january and 3 february. Don't know where it's comming from. Are there others users seeing those counter jumpings, in my case only the envoy production counter?

Rik60 wrote: Wednesday 11 February 2026 15:35 i am seeing 2 counter jumps on 31 january and 3 february. Don't know where it's comming from. Are there others users seeing those counter jumpings, in my case only the envoy production counter?

Yes, there are others, see https://github.com/domoticz/domoticz/issues/6516