IKEA Trådfri button input to blockly event
Moderator: leecollings
-
- Posts: 19
- Joined: Tuesday 27 December 2022 20:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Sweden
- Contact:
Re: IKEA Trådfri button input to blockly event
Of cource you can't, but I cant find any log file. What should I do to get a log file?
- gizmocuz
- Posts: 2394
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: IKEA Trådfri button input to blockly event
Also try to use the button as activator to a scene/group to see if that works
And maybe upgrade to Zigbee2MQTT?
And maybe upgrade to Zigbee2MQTT?
Quality outlives Quantity!
-
- Posts: 1994
- Joined: Monday 02 April 2018 20:33
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: France
- Contact:
Re: IKEA Trådfri button input to blockly event
What do you have in the Domoticz logs ?
In the Zigbee for Domoticz Plugin home directory, could you kindly do the following command and share it in the post
You can also try that as I think you have installed Z2M. It might be good to stop it (thanks for @gizmocuz to pointed out that)
In the Zigbee for Domoticz Plugin home directory, could you kindly do the following command and share it in the post
Code: Select all
ls -lR *
Code: Select all
sudo systemctl stop zigbee2mqtt
Code: Select all
sudo systemctl disable zigbee2mqtt
Zigbee for Domoticz plugin / RPI3B+ / Electrolama ZZH-P / 45 devices
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
If the plugin provides you value, you can support me with a donation Paypal.
Wiki is available here.
Zigbee for Domoticz FAQ
- waltervl
- Posts: 5361
- Joined: Monday 28 January 2019 18:48
- Target OS: Linux
- Domoticz version: 2024.7
- Location: NL
- Contact:
Re: IKEA Trådfri button input to blockly event
There is no difference in behavior of a ikea Tradfri button behavior between zigbee2mqtt or ZigbeeforDomoticz plugin... You need to add it into a Zigbee group.
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
-
- Posts: 19
- Joined: Tuesday 27 December 2022 20:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Sweden
- Contact:
Re: IKEA Trådfri button input to blockly event
Now I've got even more problems. I took the RPi down clean to check what version of Zigate I really have. Took out the Zigate board and it says Ver 1.2.
When I start up the RPi again, it says "failed to load overlay pi3 = disable-bt" and very low screen resolution. It has never done that before. Clean restart again and now it starts with full resolution, but still the error message about overlay.
I will post a log as soon as it starts as it should again. About Z2M. I have never installed anything with Z2M. I have just followed the Wiki installation guide for Zigate on RPi3.
When I start up the RPi again, it says "failed to load overlay pi3 = disable-bt" and very low screen resolution. It has never done that before. Clean restart again and now it starts with full resolution, but still the error message about overlay.
I will post a log as soon as it starts as it should again. About Z2M. I have never installed anything with Z2M. I have just followed the Wiki installation guide for Zigate on RPi3.
- gizmocuz
- Posts: 2394
- Joined: Thursday 11 July 2013 18:59
- Target OS: Raspberry Pi / ODroid
- Domoticz version: beta
- Location: Top of the world
- Contact:
Re: IKEA Trådfri button input to blockly event
try updating your system (and firmware). Could be you updated your system some time ago, and just rebooted, and now facing this issue
Quality outlives Quantity!
-
- Posts: 19
- Joined: Tuesday 27 December 2022 20:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Sweden
- Contact:
Re: IKEA Trådfri button input to blockly event
Updated Raspian. Still error code on boot. This feels like something with Raspian, not Domoticz or Zigate. The error code comes when booting the RPi and mentions overlay that was changed to turn off Bluetooth according to Wiki guide. I can't see how this could have anything to do with Zigate firmware. The firmware worked before and isn't changed since.
-
- Posts: 19
- Joined: Tuesday 27 December 2022 20:44
- Target OS: Raspberry Pi / ODroid
- Domoticz version:
- Location: Sweden
- Contact:
Re: IKEA Trådfri button input to blockly event
Do you mean that the problem was really inserted with the update and then showed up on reboot?
Then no, I don't think so. The RPi was rebooted several times between last update and when it went sour.
Thanx anyway for the suggtions. I'm greatfull to all people who cares to help.
Who is online
Users browsing this forum: No registered users and 0 guests