Timer plan improvement suggestion
Posted: Sunday 10 April 2022 8:47
Hello all,
I've mentioned that when changing from one timer plan to another one, the current timer settings are kept until there is a change in the newly selected timer plan.
An example: controlling heating using 17.5° setpoint from 23:00 to 6:00 and 19° from 6:00 to 23:00 on one timer plan(a), and 16° / 17° at the same times on a second timer plan (b).
If I do change timer plan from a to b at 7:00, setpoint will stay 19° until 23:00 to switch to 16° and back to 17° at 6:00, same issue switching from b to a.
Would it be possible to set the setpoints or any timer controlled device to the current status upon timer plan change to avoid this kind of issue?
I've mentioned that when changing from one timer plan to another one, the current timer settings are kept until there is a change in the newly selected timer plan.
An example: controlling heating using 17.5° setpoint from 23:00 to 6:00 and 19° from 6:00 to 23:00 on one timer plan(a), and 16° / 17° at the same times on a second timer plan (b).
If I do change timer plan from a to b at 7:00, setpoint will stay 19° until 23:00 to switch to 16° and back to 17° at 6:00, same issue switching from b to a.
Would it be possible to set the setpoints or any timer controlled device to the current status upon timer plan change to avoid this kind of issue?