Domoticz

Code: Select all

-- *** user settings below this line **

local doorSensorName1 = 'ATS1'  -- change to the name of your doorSensor' 
local doorSensorName2 = 'ATS2'  -- change to the name of your doorSensor' 
local scriptVar = 'simpleDelayedNotification'
local secondsUntilNotification = 5

-- *** No changes required below this line **

return
{
    on = {
            devices = { doorSensorName1, doorSensorName2 }, 
            httpResponses = { scriptVar },
         },

    execute = function(domoticz, item)

        local doorSensor1 = domoticz.devices(doorSensorName1) 
        local doorSensor2 = domoticz.devices(doorSensorName2) 
        
        local function retriggerScript(delay)
            local url = domoticz.settings['Domoticz url'] .. 
                        '/json.htm?type=command&param=addlogmessage&message=' .. 
                        scriptVar .. '%20retriggered'
            domoticz.openURL  ({ url = url, callback = scriptVar }).afterSec(delay)   -- to come back after delay seconds
        end
        
        if item.isDevice and item.active then
                retriggerScript(secondsUntilNotification) -- come back after x seconds
        else -- triggered by HTTPResponse
            if (item == doorSensor1 and doorSensor1.active) then
                local secondsOpened = doorSensor1.lastUpdate.secondsAgo 
                if secondsOpened >= secondsUntilNotification then
                    domoticz.notify(doorSensorName1,'Still open after ' .. secondsOpened .. ' seconds.' )
                end
            elseif (item == doorSensor2 and doorSensor2.active) then
                local secondsOpened = doorSensor2.lastUpdate.secondsAgo 
                if secondsOpened >= secondsUntilNotification then
                    domoticz.notify(doorSensorName2,'Still open after ' .. secondsOpened .. ' seconds.' )
                end
            end
        end
    end
}

Code: Select all

-- *** user settings below this line **

local doorSensorName1 = 'ATS1'  -- change to the name of your doorSensor' 
local doorSensorName2 = 'ATS2'  -- change to the name of your doorSensor' 
local scriptVar = 'simpleDelayedNotification'
local secondsUntilNotification = 5

-- *** No changes required below this line **

return
{
    on = {
            devices = { doorSensorName1, doorSensorName2 }, 
            httpResponses = { scriptVar },
         },

    execute = function(domoticz, item)

        local doorSensor1 = domoticz.devices(doorSensorName1) 
        local doorSensor2 = domoticz.devices(doorSensorName2) 
        
        local function retriggerScript(delay)
            local url = domoticz.settings['Domoticz url'] .. 
                        '/json.htm?type=command&param=addlogmessage&message=' .. 
                        scriptVar .. '%20retriggered'
            domoticz.openURL  ({ url = url, callback = scriptVar }).afterSec(delay)   -- to come back after delay seconds
        end
        
        if item == doorSensor1 then
            if item.isDevice and item.active then
                retriggerScript(secondsUntilNotification) -- come back after x seconds
            else -- triggered by HTTPResponse
                if doorSensor1.active then 
                    local secondsOpened = doorSensor1.lastUpdate.secondsAgo 
                    if secondsOpened >= secondsUntilNotification then
                        domoticz.notify(doorSensorName1,'Still open after ' .. secondsOpened .. ' seconds.' )
                    end
                end
            end
        elseif item == doorSensor2 then
            if item.isDevice and item.active then
                retriggerScript(secondsUntilNotification) -- come back after x seconds
            else -- triggered by HTTPResponse
                if doorSensor2.active then 
                    local secondsOpened = doorSensor2.lastUpdate.secondsAgo 
                    if secondsOpened >= secondsUntilNotification then
                        domoticz.notify(doorSensorName2,'Still open after ' .. secondsOpened .. ' seconds.' )
                    end
                end
            end
        end
    
    end
}

Code: Select all

-- *** user settings below this line **

local doorSensorName1 = 'Nuki - Porte de devant Sensor'  -- change to the name of your doorSensor' 
local doorSensorName2 = 'Nuki - Porte Cuisine Sensor'  -- change to the name of your doorSensor' 
local secondsUntilNotification = 5

-- *** No changes required below this line **

return
{
    on = {
            devices = { doorSensorName1, doorSensorName2 }, 
            customEvents = { 'doorStillOpen' },
         },
     
     logging = {
		level = domoticz.LOG_ERROR,
		marker = 'DOOR NOTIFICATION',
	},

    execute = function(domoticz, item)

        if item.isDevice and item.active then
                -- door is open : check in a few seconds if it is still open
                domoticz.emitEvent('doorStillOpen', item.id).afterSec(secondsUntilNotification)
        else
            -- Get the device from the event data
            local deviceId = tonumber(item.data)
            -- Number of seconds after last event on the sensor
            local secondsOpened = domoticz.devices(deviceId).lastUpdate.secondsAgo
            -- If the door is still open and has been for some time : notify
            if domoticz.devices(deviceId).active and secondsOpened >= secondsUntilNotification then
                domoticz.notify(domoticz.devices(deviceId).name,'Still open after ' .. secondsOpened .. ' seconds.' )
            end
            
        end
    end
}

Code: Select all

dofile ( '/home/pi/domoticz/scripts/lua/speakmodule.lua')

commandArray = {}

local function runEvery10min()
   local sensor_1 = 'sensor door 1'
   local sensor_2 = 'sensor door 2'
   local sensor_3 = 'deur 3 sensor'
   Doortext = ''

commandArray = {}
local Sensorvar = 0

if ((otherdevices[sensor_1] == 'Open')) then Sensorvar = Sensorvar + 1 end
if ((otherdevices[sensor_2] == 'Open') ) then Sensorvar = Sensorvar + 2 end
if ((otherdevices[sensor_3] ~= 'Normal') ) then Sensorvar = Sensorvar + 4 end

if Sensorvar == 0 then Message = "All doors are closed"
elseif Sensorvar == 1 then Message  = "Door 1 is open"
elseif Sensorvar == 2 then Message = "Door 2 is open"
elseif Sensorvar == 3 then Message = "Door 1 and 2 are open"
elseif Sensorvar == 4 then Message = "Door 3 is open"
elseif Sensorvar == 5 then Message = "Door 1 and 3 are open"
elseif Sensorvar == 6 then Message = "Door 2 and 3 are open"
elseif Sensorvar == 7 then Message = "Door 1, 2 and 3 are open"
end

  if (Sensorvar > 0 ) then
  -- your code here
   speak(Message)
   
  end 
  
    return commandArray
end

local m = os.date('%M')
if (m % 10== 0) then
   runEvery10min()
end

return commandArray

Code: Select all

-- *** user settings below this line **

local doorSensorName1 = 'ATS1'  -- change to the name of your doorSensor' 
local doorSensorName2 = 'ATS2'  -- change to the name of your doorSensor' 
local secondsUntilNotification = 5

-- *** No changes required below this line **

return
{
    on = {
            devices = { doorSensorName1, doorSensorName2 }, 
            customEvent = { 'doorStillOpen' },
         },

    execute = function(domoticz, item)

        if item.isDevice then
            if item.active then
                -- door is open : check in a few seconds if it is still open
                domoticz.emitEvent('doorStillOpen', item.idx).afterSec(secondsUntilNotification)
            end
        elseif item.isCustomEvent then
            -- Get the device from the event data
            local deviceId = tonumber(item.data)
            local device = domoticz.devices(deviceId)
            if nil == device then
                domoticz.log( 'Device ' .. tostring(deviceId) .. ' not found.', domoticz.LOG_ERROR)
            else
                -- Number of seconds after last event on the sensor
                local secondsOpened = device.lastUpdate.secondsAgo
                -- If the door is still open and has been for some time : notify
                if device.active and secondsOpened >= secondsUntilNotification then
                    domoticz.notify(device.name,'Still open after ' .. secondsOpened .. ' seconds.' )
                end
            end
        end
    end
}

Code: Select all

--(dzVents)--
--Door open  and 'Thuis' is On then no telegram
--Door open  and 'Thuis' is Off then send telegram with name of the door and door is open
--Thuis is Dummy switch that is on when smartphone is at home
--Door is an Kerui D026
--Telegram is activated

local doors =
{
    'Voordeur',
    'Garagedeur',
    'Schuifpui',
    'Schuifdeur',
    --'Schuurdeur'
    --'Overkappingdeur'
    --'Testdeur',  --for testing (only a switch)
}

local allDevices = doors            -- copy the doors table to table allDevices
table.insert(allDevices, 'Thuis')   -- this will add this deviceName to the table allDevices

return
{
    on =
    {
        devices = allDevices, 
    },

    logging =
    {
        level = domoticz.LOG_DEBUG,
        marker = 'deur',
    },

    execute = function(dz)
        local allDoorsClosed = true
        local  Thuis = dz.devices('Thuis') --atHome
        local atHome = Thuis.active
        dz.log('state of Thuis is ' .. dz.devices('Thuis').state .. '; atHome is ' .. tostring(atHome), dz.LOG_DEBUG)

        if atHome then
            return 
        else
            for _, doorName in ipairs(doors) do
                local door = dz.devices(doorName)
                dz.log('state of ' .. doorName .. ' is ' .. door.state .. ' (' .. ( ( door.active and 'active' ) or 'not active' ) .. ')', dz.LOG_DEBUG)

                if door.state == 'Open' or door.state == 'Alarm' then -- a door is open
                    allDoorsClosed = false
                    dz.notify('Devices', 'Device ' .. doorName .. ' is geopend ')
                    break -- no need to look at the other doors if one is open.
                end
            end
        end
    end
}