Tasmota + Mqtt Get the confirmation of a command

Everything about esp8266 and more.

Moderator: leecollings

Post Reply
Jimmy06
Posts: 10
Joined: Tuesday 30 January 2018 22:07
Target OS: NAS (Synology & others)
Domoticz version: 2021.1
Location: France
Contact:

Tasmota + Mqtt Get the confirmation of a command

Post by Jimmy06 »

Hi,

I have a problem checking the correct execution of the commands sent by domoticz to Tasmota.

In addition to my zwave devices, I added 2 sonoff s26 plug, flashed with Tasmota, to test. Everything works perfectly, with Mqtt only.

My dummy switch controls the plug well, and when I press the button on the plug, I have the status feedback on my dummy switch on the domoticz side.

BUT... When I unplug the plug to simulate a fault, and I activate my dummy switch to change the state of the relay, I have no error on the domoticz side, like the zwave switch that becomes red when the connection is lost.

Do you have a solution to get that kind of feedback on my dummy switch? Bexause without using Sonoff is not really reliable...

Thanks for your help!

Jimmy
Synology 1010+ & DS216+ & DS720+ / PI 3 & Domoticz 2021.1 / RFPlayer / ZStick gen5 / Tasmota / Espeasy
User avatar
waltervl
Posts: 5374
Joined: Monday 28 January 2019 18:48
Target OS: Linux
Domoticz version: 2024.7
Location: NL
Contact:

Re: Tasmota + Mqtt Get the confirmation of a command

Post by waltervl »

Do you use the Tasmota mqtt discovery plugin?
https://github.com/emontnemery/domoticz_mqtt_discovery

As the plugin could get some status back I believe (but not sure as i do not have Tasmota devices)

There is also a Tasmoticz plugin but that seems to be less powerfull. https://github.com/joba-1/Tasmoticz
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Jimmy06
Posts: 10
Joined: Tuesday 30 January 2018 22:07
Target OS: NAS (Synology & others)
Domoticz version: 2021.1
Location: France
Contact:

Re: Tasmota + Mqtt Get the confirmation of a command

Post by Jimmy06 »

Thank you Waltervl, I am going to check that. I did not use any plugin.

I have only Espeasy devices on my esp. I flashed Tasmota on my sonoff to get a try...
Synology 1010+ & DS216+ & DS720+ / PI 3 & Domoticz 2021.1 / RFPlayer / ZStick gen5 / Tasmota / Espeasy
Jimmy06
Posts: 10
Joined: Tuesday 30 January 2018 22:07
Target OS: NAS (Synology & others)
Domoticz version: 2021.1
Location: France
Contact:

Re: Tasmota + Mqtt Get the confirmation of a command

Post by Jimmy06 »

waltervl wrote: Monday 12 July 2021 12:12 Do you use the Tasmota mqtt discovery plugin?
https://github.com/emontnemery/domoticz_mqtt_discovery
It works perfectly!

It's so easy... when you know how to do!

Thank you very much :D
Synology 1010+ & DS216+ & DS720+ / PI 3 & Domoticz 2021.1 / RFPlayer / ZStick gen5 / Tasmota / Espeasy
User avatar
waltervl
Posts: 5374
Joined: Monday 28 January 2019 18:48
Target OS: Linux
Domoticz version: 2024.7
Location: NL
Contact:

Re: Tasmota + Mqtt Get the confirmation of a command

Post by waltervl »

You're welcome :-)
Domoticz running on Udoo X86 (on Ubuntu)
Devices/plugins: ZigbeeforDomoticz (with Xiaomi, Ikea, Tuya devices), Nefit Easy, Midea Airco, Omnik Solar, Goodwe Solar
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests