Migrating Domotich from Razberry gen3 on RPi2 to Aeotec gen5 USB stick on RPi4
Posted: Saturday 05 June 2021 17:35
Hello,
I was looking for everywhere to get the answer but so far I didnt find it. Sorry in advance if such a situation is solved somewhere else...
I was running my house since 2016 with Domoticz + Razberry GPIO board (gen3) + RPi2 and have around 30+ devices, icluding blinds controller in wall, switches in wall, power plugs... Most of them are Fibaro.
I have bought new setup, like RPi4 (4GB) + Aeotec ge5 USB stick to move my system to it. I have red all manuals how to do it, and mostly I feel it is done but I still have some issues what I would like to get help for.
It seems the primary role is passed to it, all device can be controlled by the new system. I have removed the old controller already from the Z-wave network.
My issue is that the items didnt send their "push info" to the controller. I refress one-one device on the OpenZWave Control Panel and get the state and value, but it was working automatically in the previous setup. I dont know if it is important but the controller (now the Aeotec gen5 stick) is 45. item, not the first one. I feel the devices would send their update to ID 1 or something else.
RPi is updated Buster,
Domoticz it also update released:
Version: 2021.1
Build Hash: 8547c5b7e
Compile Date: 2021-04-17 17:29:11
dzVents Version: 3.1.7
Python Version: None
Infor from OpenZWave Control Panel:
Controller Mode: SUC
Node Count: 2430
SUC Node: 45
I have added 2 JPG as nodes on chart and as table.
Can anyone help me what should I do to get the items reporting their state and values as those should?
Thank you for your help in advance!
BR,
Benjamin
I was looking for everywhere to get the answer but so far I didnt find it. Sorry in advance if such a situation is solved somewhere else...
I was running my house since 2016 with Domoticz + Razberry GPIO board (gen3) + RPi2 and have around 30+ devices, icluding blinds controller in wall, switches in wall, power plugs... Most of them are Fibaro.
I have bought new setup, like RPi4 (4GB) + Aeotec ge5 USB stick to move my system to it. I have red all manuals how to do it, and mostly I feel it is done but I still have some issues what I would like to get help for.
It seems the primary role is passed to it, all device can be controlled by the new system. I have removed the old controller already from the Z-wave network.
My issue is that the items didnt send their "push info" to the controller. I refress one-one device on the OpenZWave Control Panel and get the state and value, but it was working automatically in the previous setup. I dont know if it is important but the controller (now the Aeotec gen5 stick) is 45. item, not the first one. I feel the devices would send their update to ID 1 or something else.
RPi is updated Buster,
Domoticz it also update released:
Version: 2021.1
Build Hash: 8547c5b7e
Compile Date: 2021-04-17 17:29:11
dzVents Version: 3.1.7
Python Version: None
Infor from OpenZWave Control Panel:
Controller Mode: SUC
Node Count: 2430
SUC Node: 45
I have added 2 JPG as nodes on chart and as table.
Can anyone help me what should I do to get the items reporting their state and values as those should?
Thank you for your help in advance!
BR,
Benjamin