Temperature setpoint problem

Moderator: leecollings

Post Reply
rodaman
Posts: 23
Joined: Tuesday 29 November 2016 16:17
Target OS: -
Domoticz version:

Temperature setpoint problem

Post by rodaman »

I have especially bought Domoticz Pro app to have full controll of my Domoticz setup. I found out it is not possible to set temperature higher than 30'C in virtual thermostat. I have to controll my boiler and fireplace. It is very disapointed. Why it is so difficult to change it? Many users ask for it.
Gerwin
Posts: 84
Joined: Friday 12 August 2016 13:08
Target OS: Raspberry Pi / ODroid
Domoticz version:
Contact:

Re: Temperature setpoint problem

Post by Gerwin »

if you use the app, go to settings then to standard settings and here you can set the maximum and minimum temperature you can set as setpoint
rodaman
Posts: 23
Joined: Tuesday 29 November 2016 16:17
Target OS: -
Domoticz version:

Re: Temperature setpoint problem

Post by rodaman »

Thank you very much. It works finally... :D
Jonkheer
Posts: 11
Joined: Wednesday 15 March 2017 10:45
Target OS: Linux
Domoticz version: 2023.2
Contact:

Re: Temperature setpoint problem

Post by Jonkheer »

I've installed Evohome with 4 remote controlled thermostats. The system is connected to Domoticz with the Evohome web interface. It's possible to change the setpoints of each thermostats in the API. But I can't change the set point with the Domoticz app.
User avatar
waaren
Posts: 6028
Joined: Tuesday 03 January 2017 14:18
Target OS: Linux
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Temperature setpoint problem

Post by waaren »

Jonkheer wrote: Monday 09 September 2019 22:38 I've installed Evohome with 4 remote controlled thermostats. The system is connected to Domoticz with the Evohome web interface. It's possible to change the setpoints of each thermostats in the API. But I can't change the set point with the Domoticz app.
on my (Android) mobile I have no problem changing the setPoint. What are your settings / versions ?
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Jonkheer
Posts: 11
Joined: Wednesday 15 March 2017 10:45
Target OS: Linux
Domoticz version: 2023.2
Contact:

Re: Temperature setpoint problem

Post by Jonkheer »

Version 0.2.135 built 6204 which is recent according to playstore. Selecting the device in the app gives me only the option to see the logging (day, month, year), the favorite option and info button which opens a new window with IDX number an the last seen status.
User avatar
waaren
Posts: 6028
Joined: Tuesday 03 January 2017 14:18
Target OS: Linux
Domoticz version: Beta
Location: Netherlands
Contact:

Re: Temperature setpoint problem

Post by waaren »

Jonkheer wrote: Thursday 12 September 2019 21:48 Version 0.2.135 built 6204 which is recent according to playstore. Selecting the device in the app gives me only the option to see the logging (day, month, year), the favorite option and info button which opens a new window with IDX number an the last seen status.
I use the same version. (selected temperature devices)
Screenshot_20190912-223841.jpg
Screenshot_20190912-223841.jpg (305.81 KiB) Viewed 2829 times
selected "Zet"
Screenshot_20190912-223904.jpg
Screenshot_20190912-223904.jpg (230.14 KiB) Viewed 2829 times
Debian buster, bullseye on RPI-4, Intel NUC.
dz Beta, Z-Wave, RFLink, RFXtrx433e, P1, Youless, Hue, Yeelight, Xiaomi, MQTT
==>> dzVents wiki
Jonkheer
Posts: 11
Joined: Wednesday 15 March 2017 10:45
Target OS: Linux
Domoticz version: 2023.2
Contact:

Re: Temperature setpoint problem

Post by Jonkheer »

waaren wrote: Thursday 12 September 2019 22:48
Jonkheer wrote: Thursday 12 September 2019 21:48 Version 0.2.135 built 6204 which is recent according to playstore. Selecting the device in the app gives me only the option to see the logging (day, month, year), the favorite option and info button which opens a new window with IDX number an the last seen status.
I use the same version. (selected temperature devices)
Exactly what I had suspect on my device, but it's only performing as as thermometer. I'm missing the "Zet" button.
Jonkheer
Posts: 11
Joined: Wednesday 15 March 2017 10:45
Target OS: Linux
Domoticz version: 2023.2
Contact:

Re: Temperature setpoint problem

Post by Jonkheer »

Suggestions anyone?

It’s only an issue for the Android devices. Some in house IOS systems (with Pilot) are also able to set the temperature.
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests