Domoticz

Hi,

I want to buy Livolo Zigbee wall switch ( https://www.aliexpress.com/store/produc ... 90067.html ) and i wish to know if someone tested this switch with ZIGATE.

Thanks!

Looking at the following site it is not easy to get these switches connected as they use specific settings. https://github.com/Koenkk/zigbee2mqtt/issues/592

But on another domotica application (Jeedom) Zigate Plugin someone is working on it but my french is a little bit rusty : https://github.com/KiwiHC16/Abeille/issues/570

From the french, this seems working with the Zigate. So just an integration with the plugin, might be needed.
Come back to me when you get it, I'll let you know how to proceed

Test and Implementation in progress see https://github.com/sasu-drooz/Domoticz- ... issues/337

Volonteers to help and support us, you are more than welcome.
Just switch to branch pre-4.1 , you have an initial implementation of Livolo support

Hi...Right now i tested the livolo zigbee switch with 1 touch button i used 4.0 plugin :

2019-02-20 21:02:32.451 Error: (Zigate) Decode8102 - Receiving a message from unknown device : 4c08 with Data : 6d4c0801040600000018000101

This is the message from domoticz log

pipiche wrote: ↑Sunday 17 February 2019 12:59 Volonteers to help and support us, you are more than welcome.
Just switch to branch pre-4.1 , you have an initial implementation of Livolo support

I'm webdeveloper and i didn't work with hardware programing yet but i want to help you if i can and you explain to me how.

Will be creating a dedicated branch for livolo. Stay tuned


Envoyé de mon iPhone en utilisant Tapatalk

You can switch to the livolo branch, by doing:

- git pull
- git checkout livolo

then , you'll have to remove the livolo from the Domoticz/Plugin , in order to re-pair and re-create the widgets
Commands should work, but they are several issues:

- it looks that after a while the livolo get disconnected from the Zigate (nothing to do with the plugin )
- To get status is where we are working now

pipiche wrote: ↑Wednesday 20 February 2019 20:46 Will be creating a dedicated branch for livolo. Stay tuned


Envoyé de mon iPhone en utilisant Tapatalk

Tuned

I didn’t realize they also made a zigbee model. Based on reports in other forums, though, it is using a proprietary profile and probably will not work with SmartThings. People are reporting that it only works with its own gateway cleanmaster.

It has been reported to the Zigate developpers as the Livolo switchs can be paired and can work , but after few minutes they got removed from the Zigbee network.

https://github.com/fairecasoimeme/ZiGate/issues/148

https://github.com/sasu-drooz/Domoticz- ... issues/337

Christo99 wrote: ↑Thursday 04 April 2019 13:36 I didn’t realize they also made a zigbee model. Based on reports in other forums, though, it is using a proprietary profile and probably will not work with SmartThings. People are reporting that it only works with its own gateway cleanmaster.

It works too with zigbee2mqtt with some tricks.
https://github.com/Koenkk/zigbee2mqtt/issues/592

Looking at the tricks and the implication, I would simply stay away from that switch , or just use their Hub