Domoticz

Posted: **Saturday 01 September 2018 13:52**

I bought from ebay a RGB Wifi Controller. Don´t know if it is a clone or not.
Seems to be a LC03. Works with Magic Home Android App too.

First I looked inside the case. The ESP is integrated in PCB. Its a closed Circuit and not like the others with an ESP PCB.
I got other Problems too, but first of all how can I connect it with Domo?

I created an Arilux Hardware Device with the right IP, then create a Device and give it a name.
But after that there is no switch or else in Switches. All is clear.

I started add new devices too. Can only see in Log this.

Code: Select all

018-09-01 12:51:01.915 Status: Arilux stopped
2018-09-01 12:51:05.884 Status: Arilux Worker started...
2018-09-01 12:51:26.011 (rgb) Color Switch ()
2018-09-01 12:51:26.008 Status: Arilux: New controller added (192.168.0.55/rgb testr)
2018-09-01 12:51:42.070 Status: New sensors allowed for 5 minutes...
2018-09-01 12:51:48.907 Status: User: Cino initiated a switch command (20/rgb testr/On)
2018-09-01 12:51:48.908 Status: Arilux: Sending data to device
2018-09-01 12:51:49.125 (rgb) Color Switch (rgb testr)
2018-09-01 12:51:52.602 (rgb) Color Switch (rgb testr)
2018-09-01 12:51:52.451 Status: User: Cino initiated a switch command (20/rgb testr/Off)
2018-09-01 12:51:52.451 Status: Arilux: Sending data to device

And now my other Problem. It could be the device is broken. I tested 2 different rgb stripes. When I choose Red as an example the Blue channel doesnt complete gets down. And I could not turn off all. Green will be not shut off.

Does anybody have the same problems?

Posted: **Friday 04 September 2020 19:33**

Hello,

I'm new in domotic. I installed my Raspi 6 month ago with Raspbian and then start to play : manage some lights, airconditioner and blinds.
I try and take time to understand and find the right way to proceed. That's funny and love that; But ... because there is always a but ....

I encounter exactly the same issue with an Arilux-LC09 (RGB) recently purchased.
I add the hardware without issue (looks like), then add light and Domotics said "device created and available under switch"
BUT ....
but, nothing in device list.

Did someone found a solution ?

Thanks for your help.

Posted: **Tuesday 22 September 2020 10:18**

Hello,
None of you have an answer or at least any idea on how to proceed ?
Suprising as these products are probably one of the most widespread in Amazon to use led strips.
Hope someone will be able to adress the point.
Thanks per advance.

Posted: **Tuesday 06 October 2020 12:54**

The same over here. Arilux does not work for 100 procent.

I can add the controllers and manually it is possible to turn on/off the lights (led strips), but the timers don't work.

Domoticz

How to add an Arilux RGB Controller Wifi

How to add an Arilux RGB Controller Wifi

Re: How to add an Arilux RGB Controller Wifi

Re: How to add an Arilux RGB Controller Wifi

Re: How to add an Arilux RGB Controller Wifi