Domoticz

there is a possibility to set somewhere an interval where every 10 minutes the lux value from the sensor inside the xiaomi gateway (v2) is forwarded to domoticz?

on my system the xiaomi Lux is a device. I am not 100% sure but if I remember correctly it was automatically created when adding the hardware to domoticz. Could you check if it is not already on your system (maybe in the unused devices area ) ?

Yes it is a device and I see now that the luxvalue get updated but sometimes 1 time in an hour and sometimes 6 times. I don' t understand the logical behind this and would like to control it by myself.

remko2000 wrote: Saturday 26 May 2018 8:26 Yes it is a device and I see now that the luxvalue get updated but sometimes 1 time in an hour and sometimes 6 times. I don' t understand the logical behind this and would like to control it by myself.

It's a known gateway problem and cannot be solved by domoticz. (dirty) Workaround is to send an on/off to the internal gateway light, forcing the Lux sensor to measure the light and update it's value.

Ok thx. I will try that workaround.

hello.
The light must be on any time? or if i set lighton and lightoff this works?
Becasue if the script set one after the other, the light not turn on and maybe is a good woorkaround