Domoticz

Code: Select all

--[[ LEDSlaveDemo.lua (tested and working on dzVents 2.4.5)
 ]]--
 
return {
    on = { devices = { "LED_strip1" } },
    
    logging =   {       level   =   domoticz.LOG_INFO,                  -- switch to LOG_DEBUG when needed                                   
                        marker  =   "LEDSlaveDemo" },                                           

    
    execute = function(dz, trigger)
        local slave = dz.devices("LED_strip2")
        dz.log(trigger.name .. " state: " .. trigger.state ..", dimlevel: " .. trigger.level .. "%"  ,dz.LOG_DEBUG)
         
        if trigger.state == "On" then 
            slave.switchOn().checkFirst()                 -- remove the checkFirst() if you also control the on/off state of this dimmer outside domoticz
            slave.dimTo(trigger.level)
        else
            slave.switchOff().checkFirst()                -- remove the checkFirst() if you also control the on/off state of this dimmer outside domoticz
        end
        
    end
}

Code: Select all

--[[ LEDSlaveDemo.lua (tested and working on dzVents 2.4.6) but probably also working on earlier versions
  ]]--
 
return {
    on = { devices = {"LED_strip1" } },
    
    logging =   {       level   =   domoticz.LOG_DEBUG,                  -- switch to LOG_INFO when results are OK 
                        marker  =   "LEDSlaveDemo" },                                           

    data    =   {      setColor         = { initial = true },           -- This is necessary because color does not follow in the first pass
                       dimLevel         = { initial = 50   }, 
                       color            = { initial = {}   }}, 
                       
    execute = function(dz, trigger)
        local slave   = dz.devices("LED_strip2")
        
        dz.log("Master ( name / state / level / color )  ( " .. 
                        trigger.name .. " / " .. 
                        trigger.state .. " / " .. 
                        trigger.level .. " / " .. 
                        trigger.color .. " )",dz.LOG_DEBUG)
        
        colorTable = dz.utils.fromJSON(trigger.color)                       -- convert color (a json string) to a Lua table
        
        if trigger.state ~= "Off" and trigger.level > 0 then                -- State can be "On", "Off" or "set Color" 
            dz.data.dimLevel =  trigger.level
            dz.data.color    =  trigger.color
            slave.setRGB(  colorTable.r, colorTable.g, colorTable.b )  
            slave.dimTo(tonumber(dz.data.dimLevel))
            if dz.data.setColor then                                        -- We need to trigger the script another time as the color 
                dz.data.dimLevel =  trigger.level                           -- does not follow the first pass. Does not seem timing but looks like    
                trigger.dimTo(dz.data.dimLevel)                             -- dzVents is not yet updated with right color values from master
                dz.data.setColor = false                                  
            else
                dz.data.setColor = true
            end 
        else
            slave.switchOff()
        end
    end
}